12-05-2014, 06:23 AM | #1 |
More Sound
I have an LS3 putting 492 hp to the rear wheels. I have corsa exhaust and I want more sound. Don't get me wrong, it sounds pretty good, but I would like for it to sound more aggressive. What do you think?
|
|
12-05-2014, 06:29 AM | #2 |
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
Is the Corsa cat back all you have on the exhaust? Long tubes?
|
12-05-2014, 06:41 AM | #3 |
My Dream Car
Drives: 2011 SIM LS3 1SS Join Date: Jul 2009
Location: staten island
Posts: 1,534
|
electric cutouts would make it sound real loud, only when you want it to be
__________________
CAI intake/ADM Scoop/Stainless Power Headers/Dynatech cat back exhaust/Vitesse Throttle Control/ Ported Throttle Body/QTP Electric Cutouts/ 3.91 gears and janetty rear posi/ Tuned by Janetty racing
|
12-05-2014, 07:26 AM | #4 |
|
What mods do you all have? Long tubes? Cutouts? Cammed...my favorite choice for sound.
__________________
2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan,
Holley fuel rail, Proform valve covers, relocated coil packs |
12-05-2014, 10:13 AM | #5 |
12-05-2014, 10:17 AM | #6 |
Drives: orange 2011 2SS/RS Join Date: Nov 2011
Location: royersford Pa
Posts: 1,080
|
Cam, if that is what you are looking for or if you just want loud there are more things to do
__________________
ARH 1 7/8" Headers W/HFC, GM Performance Exhaust / K&N Typhoon CAI, Comp Custom Grind Dominator 3 Cam, Pioneer Dual Valve Springs, Trickflow Push rods, IWIS Timing Chain, Rapid Motorsports Tune, 496 RWHP
|
12-05-2014, 10:18 AM | #7 |
It is cammed, don't know the specs on the cam, it was like this when I bought it. I'm not familiar with electric cutouts. The motor hits a pretty good lick (although I would like more), But I would like for it to be louder
|
|
12-05-2014, 10:21 AM | #8 |
Drives: Florida Speed & Power Join Date: Jan 2011
Location: Pinellas Park, FL
Posts: 3,185
|
If he is making 492 wheel we can assume he has headers and is cammed, since this is the non-fi Section. So the only option would be remove HF Cats if you have them for Off-Road Pipes, or switch the Exhaust out to something more aggressive (SW Retro, Most FlowMasters etc..)
Or get yourself some nice Cutouts where you can be loud on demand. |
12-05-2014, 10:22 AM | #9 |
Drives: Florida Speed & Power Join Date: Jan 2011
Location: Pinellas Park, FL
Posts: 3,185
|
|
12-05-2014, 10:24 AM | #10 | |
Drives: Evil Eva, 2010 2SS LS3 Join Date: Aug 2013
Location: Falls Church, Virginia
Posts: 3,600
|
Quote:
THIS! cutouts sound awesome. and you can turn them on or off. Mine actually freed up 7.5 RWHP. I confirmed this twice on a mustang dyno that is very conservative.
__________________
"You simply cannot trust quotes found on the internet." -Abraham Lincoln
|
|
|
|
|
|