Albuquerque Cruising! - Page 422 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Dakine · 12-10-2014, 09:12 AM

Quote:

Originally Posted by Ivan @ Southwest Speed

My opinion.

They sound much better than the OBX headers for about the same price. They are made quite well and fit pretty darn good.

The sound is also pretty good. Althought these were installed in front of a factory Catback with the big trash cans, it could still be identified as being a performance car.

I had them long ago with a DT Catback and they sounded very good to me.

For the price, they are a good buy imho.

Perhaps Stacy can post up a video and his thoughts.

Ivan

I haven't heard many Camaros with headers or aftermarket exhaust, so the only thing I really have to go off of is how the car sounded before and after. I think it is a huge improvement, it sounds great, but it's not too loud - I like it that way. The car sounds great, runs great, and pulls great. Big improvement from just a CAI. I'll try to get a video clip posted.

Stacy

Ivan @ Southwest Speed · 12-10-2014, 09:54 AM

Quote:

Originally Posted by SSmokinSS

Back yard?

The dumps out here in the east mountains will take it if its in a sealed container....Let me know if I can help.

I'm hunting for a new project if anyone has any leads! Looking for a 3rd or 4th gen cheap. might even look at a T/A. Body would be more important than motor. Anyone have a roller up for grabs? Interested in a vinyl wrap for your car? Might work out a trade....

I have that '99 Formula still Phil...

Might need a little more than you're lookin to do on it but. It has a title too.

SSmokinSS · 12-10-2014, 11:46 AM

Quote:

Originally Posted by Ivan @ Southwest Speed

I have that '99 Formula still Phil...

Might need a little more than you're lookin to do on it but. It has a title too.

Forgot all about that one. I don't think I have actually seen it? Shoot me a pic if you have one already. If not, I can check it out next time I stop by. I'll bring my piggy bank.

If you don't get on the ball, I may drag your SS out from under that tarp.....

Ivan @ Southwest Speed · 12-11-2014, 12:31 AM

Quote:

Originally Posted by SSmokinSS

Forgot all about that one. I don't think I have actually seen it? Shoot me a pic if you have one already. If not, I can check it out next time I stop by. I'll bring my piggy bank.

If you don't get on the ball, I may drag your SS out from under that tarp.....

Its been hit in the rear. Would need some rear quarter messaging and a bumper cover. Hit right below the tailights and didn't even mess those up. Was a really clean car but it's missing some parts now. LOL

That car was purchased for the strict intentions of using as a parts car for said SS under tarp.

I needed some crap off it and ended up selling the entire interior minus headliner and door panels.

But the shell and some added items are there.

Had some fun today and yesterday on the rollers....

Kristens ZL1 before, after Cam, after Pullies:
Name: kristen.jpg
Views: 590
Size: 102.4 KB

Name: kristen.jpg
Views: 590
Size: 102.4 KB

Stacys 2010 SS with TSP LTs and Dyno Tune Before and After:
Name: vics ss.jpg
Views: 556
Size: 97.7 KB

Gaynor's 2014 1SS with just a Dyno Tune Before and After:
Name: Gaynors ss.jpg
Views: 437
Size: 99.7 KB

SSmokinSS · 12-11-2014, 12:39 AM

Still might work! I'll get with you when I head back to the Q.

Ivan @ Southwest Speed · 12-11-2014, 12:51 AM

Quote:

Originally Posted by SSmokinSS

Still might work! I'll get with you when I head back to the Q.

Right on killer. Bring your flatbed and some Skittles.

Dakine · 12-11-2014, 10:23 AM

Quote:

Originally Posted by Ivan @ Southwest Speed

Its been hit in the rear. Would need some rear quarter messaging and a bumper cover. Hit right below the tailights and didn't even mess those up. Was a really clean car but it's missing some parts now. LOL

That car was purchased for the strict intentions of using as a parts car for said SS under tarp.

I needed some crap off it and ended up selling the entire interior minus headliner and door panels.

But the shell and some added items are there.

Had some fun today and yesterday on the rollers....

Kristens ZL1 before, after Cam, after Pullies:
Attachment 679718

Vics 2013 1SS with Borla LTs and Dyno Tune Before and After:
Attachment 679720

Gaynor's 2014 1SS with just a Dyno Tune Before and After:
Attachment 679719

Hey Ivan,

The middle graph you have labeled as Vic's 2013 was actually my Dyno run!

Stacy

Ivan @ Southwest Speed · 12-11-2014, 12:27 PM

Quote:

Originally Posted by Dakine

Hey Ivan,

The middle graph you have labeled as Vic's 2013 was actually my Dyno run!

Stacy

Fixed. Great catch!!

Ivan @ Southwest Speed · 12-16-2014, 03:07 PM

Cleaning out the shop....1 truck down, 1 to go!!!

That only leaves the Shop '01 SS to get after......muwahahaha!

What's good y'all??

SSmokinSS · 12-16-2014, 05:01 PM

Wrapping the carbon fiber gto! Sounds like we need to send some work your way. Empty shop is no fun....

Ivan @ Southwest Speed · 12-16-2014, 10:01 PM

Quote:

Originally Posted by SSmokinSS

Wrapping the carbon fiber gto! Sounds like we need to send some work your way. Empty shop is no fun....

Prepping for paint and lobby refresh...finally.

digdeep0169 · 12-16-2014, 10:21 PM

#SWS #FTMFW

SSmokinSS · 12-17-2014, 12:06 AM

Quote:

Originally Posted by Ivan @ Southwest Speed

Prepping for paint and lobby refresh...finally.

nice! if you need anything for your office, or lobby, "I know a guy"

K1SSRSS · 12-23-2014, 10:56 AM

It's been quiet over here, hope everybody has a Merry Christmas and a Happy New Year!!!

12-11-2014, 12:39 AM	#5899
SSmokinSS Get Some Drives: 2014 ZL1 6Speed Join Date: Mar 2012 Location: The Wood's Edge, NM Posts: 712	Still might work! I'll get with you when I head back to the Q. __________________ BUILD THREAD

12-16-2014, 05:01 PM	#5904
SSmokinSS Get Some Drives: 2014 ZL1 6Speed Join Date: Mar 2012 Location: The Wood's Edge, NM Posts: 712	Wrapping the carbon fiber gto! Sounds like we need to send some work your way. Empty shop is no fun.... __________________ BUILD THREAD

12-16-2014, 10:21 PM	#5906
digdeep0169 Drives: 2012 Camaro SS 45th Anniversary Join Date: Sep 2013 Location: Albuquerque Posts: 963 View My Garage	#SWS #FTMFW __________________ ~ 2012 SS ~

12-23-2014, 10:56 AM	#5908
K1SSRSS Chief Many Camaros Drives: A paid off Camaro!!! Join Date: Mar 2009 Location: Las Cruces, NM Posts: 1,863 View My Garage	It's been quiet over here, hope everybody has a Merry Christmas and a Happy New Year!!! __________________ 504hp/478tq Performance: Kooks LT, 3'' Exhaust, V-Max TB, Roto-Fab CAI, Custom Ported/Port Matched Heads and Intake Suspension: BMR Adjustable LCA's, BMR Trailing Arms, Poly Bushings, BMR Toe Rods Coming Soon (still in the box): Procharger F1R, G-Force Axles, 3:91 gears w/Eaton Truetrac

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CARS AND COFFEE ALBUQUERQUE? ANYONE INTERESTED	jnewberr2ssrs	USA - Southwest	55	05-15-2011 09:55 AM
Moutain Cruise Meet up - Sandia Peak (Albuquerque)	jnewberr2ssrs	USA - Southwest	21	04-02-2010 05:14 PM
Saw a SIM V6 in Albuquerque, NM	BL202	USA - Southwest	3	02-04-2010 10:19 PM
Smokey Mountains and Blue Ridge Parkway cruising.	CamaroSS_LS3	5th Gen Camaro SS LS LT General Discussions	26	09-01-2009 06:12 AM
High altitude cruising	Rob53	Member Car Journals	7	07-16-2009 07:21 PM

12-16-2014, 03:07 PM	#5903
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,161	Cleaning out the shop....1 truck down, 1 to go!!! That only leaves the Shop '01 SS to get after......muwahahaha! What's good y'all??