What Did You Do To Your Camaro Today? - Page 905 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Burt · 01-15-2015, 09:36 PM

I keep buying things I don't have the time to put on. MGW shift knob on the way now, it'll probably sit with my FE6 sway bars and toe links, camber caster plates, and second set of wheels. I'm more likely to get it put on soon, but still, my roommate is probably starting to think I'm a hoarder...

Ryanbabz71 · 01-15-2015, 09:46 PM

Painted my JRE scoop

Ryan

tonedox1 · 01-16-2015, 01:46 PM

Installed my Injen Intake yesterday.

Helps out a little with the sound of my exhaust.

Took about an 1hr, took my time. Also proud of myself, because instructions said to remove Driver-side wheel to access bolts for removal of the stock washer container. I was able to do this job "without" removing the wheel and stuff.

Angrybird 12 · 01-16-2015, 02:13 PM

I installed my Vitesse throttle controller....worth ever penny.

Ryanbabz71 · 01-16-2015, 10:02 PM

Installed the JRE CAI scoop

Ryan

el-guapin · 01-18-2015, 03:38 PM

Changed the rear diff fluid. Guess it had not been changed before. At 20k miles, both fill and drain plugs were covered with paste and some shavings. Went with Mobil1 75w90

Ace0751 · 01-18-2015, 05:16 PM

Mid 40s yesterday so I started her up and just sat in the car for 20 minutes day dreaming about spring with the top down. Then reality hit when I turned her off.

Tom_T · 01-18-2015, 05:51 PM

Quote:

Originally Posted by Ace0751

Mid 40s yesterday so I started her up and just sat in the car for 20 minutes day dreaming about spring with the top down. Then reality hit when I turned her off.

Same here, just had to take the cover off for a few and listen to the growl of the engine..

slvrsrpnt · 01-18-2015, 05:55 PM

she got a bath today, and I found 2 new yucky spots...oh well, that's what happens when it leaves the driveway

lownslowss · 01-18-2015, 05:57 PM

Installed full cradle bushings. Unfortunately my derlin upper control arm bushings won't be here until Tuesday.

Ace0751 · 01-18-2015, 06:12 PM

Quote:

Originally Posted by Tom_T

Same here, just had to take the cover off for a few and listen to the growl of the engine..

Same here I let her get warm for a few minutes then I dropped the top with the seat warmer on and the heat going and it felt real good. March can't come soon enough.

chris1973 · 01-18-2015, 06:22 PM

My seven year old son and I installed the Razzi body kit.

Vroom_vroom · 01-18-2015, 11:20 PM

Getting gas Milage

Explit Player · 01-19-2015, 09:48 AM

Quote:

Originally Posted by Spec

Put these on today... Initial feeling and results - the ride looks great and feels more firm at high speeds (freeway so far)... a more open stance will do that apparently. Further review and more pics (got dark on me) to come later.

Id like to see the result

01-15-2015, 09:36 PM	#12657
Burt Cone Killer Drives: 2012 SS Join Date: Dec 2013 Location: St. Albans, West Virginia Posts: 832	I keep buying things I don't have the time to put on. MGW shift knob on the way now, it'll probably sit with my FE6 sway bars and toe links, camber caster plates, and second set of wheels. I'm more likely to get it put on soon, but still, my roommate is probably starting to think I'm a hoarder... __________________ 2012 Camaro SS - Sold Selling off my remaining wheels, tires, 27mm front sway bar, and MGW shift knob. Get them out of my house before my wife puts me out!

01-15-2015, 09:46 PM	#12658
Ryanbabz71 Drives: 2021 ZL1 1LE Satin Steel Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,358 View My Garage	Painted my JRE scoop Ryan __________________ Ryan 2021 ZL1 1LE Satin Steel Metallic Build Page: https://www.camaro6.com/forums/showthread.php?t=632481

01-16-2015, 01:46 PM	#12659
tonedox1 Drives: 2014 camaro 2LS, V6 AT Join Date: Dec 2014 Location: Chandler. AZ Posts: 17 View My Garage	Installed my Injen Intake yesterday. Helps out a little with the sound of my exhaust. Took about an 1hr, took my time. Also proud of myself, because instructions said to remove Driver-side wheel to access bolts for removal of the stock washer container. I was able to do this job "without" removing the wheel and stuff. Attached Images __________________ -Vitesse Throttle Controller -Elite Engineering Gen 2 Catch Can - Black, Dual Exit, Black AN Fittings w/Black Nylon Braided Hose, Standard Bracket PN# E2-CAMV6 -Elite Engineering Clean-Air Oil Separator PN# Clean-Air-Sep - Black -VMAX LFX CNC Ported Throttle Body PN# VMAXV612TB-U -Borla Cat Back Exhaust - S Type Series PN#: 140530 -Solo Performance LFX V6 High Flow Catalytic Converters #C23926-C23925 (From Phastek.com) -Injen Tuned Cold Air intake PN# F7012P

01-16-2015, 02:13 PM	#12660
Angrybird 12 7 year Cancer Survivor! Drives: 17 Cruze RS, 07 G6 GT, 99 Astro Join Date: Dec 2007 Location: East Tennessee Posts: 21,546	I installed my Vitesse throttle controller....worth ever penny. __________________ Cancer's a bitch! Enjoy life while you can! LIVE, LOVE, DRIVE... The Bird is the word!

01-16-2015, 10:02 PM	#12661
Ryanbabz71 Drives: 2021 ZL1 1LE Satin Steel Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,358 View My Garage	Installed the JRE CAI scoop Ryan __________________ Ryan 2021 ZL1 1LE Satin Steel Metallic Build Page: https://www.camaro6.com/forums/showthread.php?t=632481

01-18-2015, 03:38 PM	#12662
el-guapin Trust No One! Drives: 2010 SIM 2LT/RS Join Date: Oct 2014 Location: NOLA Posts: 531	Changed the rear diff fluid. Guess it had not been changed before. At 20k miles, both fill and drain plugs were covered with paste and some shavings. Went with Mobil1 75w90 __________________

01-18-2015, 05:16 PM	#12663
Ace0751 GEN5 Detail Drives: 2011 Synergy Series 2SS Convertible Join Date: Sep 2014 Location: Northeast, OH Posts: 1,986	Mid 40s yesterday so I started her up and just sat in the car for 20 minutes day dreaming about spring with the top down. Then reality hit when I turned her off.

01-18-2015, 05:55 PM	#12665
slvrsrpnt Drives: 2017 1SS 1LE Join Date: Nov 2014 Location: Cape Coral, Florida Posts: 228 View My Garage	she got a bath today, and I found 2 new yucky spots...oh well, that's what happens when it leaves the driveway

01-18-2015, 05:57 PM	#12666
lownslowss PaPa Smurf Drives: 2022 SS 1LE Join Date: Jul 2014 Location: League City Posts: 632 View My Garage	Installed full cradle bushings. Unfortunately my derlin upper control arm bushings won't be here until Tuesday. __________________ 2022 Rapid Blue SS 1LE

01-18-2015, 06:22 PM	#12668
chris1973 Drives: 2010 Camaro 2SS/RS Black on Black Join Date: Jan 2010 Location: Virginia Posts: 212 View My Garage	My seven year old son and I installed the Razzi body kit. __________________ 2010 Camaro 2SS/RS Black on Black Performance Mods: CAI, ADM Scoop, Rotofab Washer Kit, Cat Back Borla ATK, SLP Underdrive Pulley, SCT Tune, DynaTech Long Tube Headers and High Flow Cats. Appearance Mods: Razzi Bodykit with LEDs, 3D Carbon Side Vents, Tint, Painted Rims and Calipers, See/hear my Camaro at http://youtu.be/wn0Ck-cw6WQ

01-18-2015, 11:20 PM	#12669
Vroom_vroom The gritos pollo!!! Drives: Like a idiot Join Date: Jul 2012 Location: Las Vegas Posts: 1,215 View My Garage	Getting gas Milage __________________ ______ If you don't stop how can they give you a ticket?-The Big Tuna___ '12 1Ls Camaro; Slp loud mouth I\|maganflow x-pipe\|Injen long ram intake\|brembo brake upgrade\| russell s.s. lines\|2LT polished 19's\|billet 5mm spacers\|tinted tail lights&markers\|pdmi\|billet c. can\| '13 Avenger R/T '77 T/A 6.6;, draining my wallet.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM