I finally got her! My 2011 Synergy Green SS Build

[YoungGunn187]

Received my TSP 1" 7/8 Long Tubes. Put them on myself, everything went smooth except for the manifold bolts. (PITA!!)



with my 1.25" drop, I only have about 3" from the bottom of the collector to the ground

[YoungGunn187]

Vitesse Throttle Controller. I love the placement and was a very easy install.

[YoungGunn187]

Photoshoot



Me, Behic2320, StephenofSD

[YoungGunn187]

Palomar Mtn and Julian cruise. Sunday, December 28th, 2014.

Attendance: ZL1 Reaper, YoungGunn187, Behic2320, Gonzo, Balue, and Camatron

[bhillakaiceberg]

Nice looking SGM man! I love your stance. I'd sooo drop mine but i already scrape sometimes when I run my front 17s on the way to the track...LOL. Great, now I know what the MPD1 looks like on our color. A buddy gave me his for free. Ima plasti-dip it like you did for now.

[YoungGunn187]

Originally Posted by bhillakaiceberg

Nice looking SGM man! I love your stance. I'd sooo drop mine but i already scrape sometimes when I run my front 17s on the way to the track...LOL. Great, now I know what the MPD1 looks like on our color. A buddy gave me his for free. Ima plasti-dip it like you did for now.

tell me about it...im lucky and havnt scraped my ground effects yet. But after only having my long tubes on for a couple days, ive already bottomed out three times :P. just this last time it was on those raised circles at the gas station where they pump the gas into the ground (which only sticks up an inch). Requires a whole different style of driving.

Nice find on the spoiler. you will love it! slap it on asap.

[Mikamaro]

Very nice work on the SG! congrats.
So how do you like your H&R 25mm so far?

[YoungGunn187]

Originally Posted by Mikamaro

Very nice work on the SG! congrats.
So how do you like your H&R 25mm so far?

They are perfect. I was originally concerned about putting 25 mm on the rears, thinking they might stick out too far compared to 20 mm. But now after having them on the car I wouldn't have it any other way. 25mm all around is just right.

Just be aware that rocks can get tossed town the side of your car from the front wheels being pushed out. I've had the spacers on the car for two - three months and have maybe 5 rock chips around the gills.

[YoungGunn187]

Well, after receiving and installing Jegs xpipe (replacing factory resonated hpipe), the amount of rasp was unbearable. Made me not want to drive my car!! I guess straight piped isnt for me

So I quickly bought a MagnaFlow resonated x pipe and chose next day delivery. I visited the same shop two days after previous install and had them perform the second swap. This time I am 100% happy with the results.

So as of now, LT headers without cats + MagnaFlow resonated x pipe + muffler delete.

[LIM3]

Awesome build so far.

[Eddie2SS]

Originally Posted by YoungGunn187

sanded, primed, painted, baked and installed MBRP square exhaust tips.

extended pipes from axleback using 3" tubing.

sanded using 220 grit


primed using three coats VHT flame proof primer


painted using three coats VHT flame proof matte black header paint


baked in three sessions of 30 minutes, 200, 400, and 600 degrees. (with 30 minutes cool down period between each)

This looks awesome. Will have to get these ASAP.

[MLAZ1990]

Originally Posted by YoungGunn187

Photoshoot



Me, Behic2320, StephenofSD

Love this pic!! The green one is BADASS!!!

[Mike14bumblebee]

Car looks sweet man.. I like the paddle shift being put into the shifter. How did u go about doing that? What's the cost on a mod like that?

[StephenofSD]

Originally Posted by Mike14bumblebee

Car looks sweet man.. I like the paddle shift being put into the shifter. How did u go about doing that? What's the cost on a mod like that?

Unfortunately he doesn't have the ride anymore :(