got about $600 for mods need help

[camaro1350]

Originally Posted by pinoyscorpion951

Jacfab intake manifold spacer (extendolator) and ported intaked manifold. He gives you special pricing if you purchase both. Should be about 400 dollars after the core fee is returned. Free shipping. Both have been dyno proven to provide great gains. Easy to install. Take the remaining 20 dollars, gas up and have fun with the new found performance increase.

+1 about to pull the trigger on this and then I have all the bolt on mods for this LFX as far as I know. Maybe be at 300 whp then.

[hzisfrom1994]

Solo high flow cats for 600 in Amazon.

[pinoyscorpion951]

Originally Posted by camaro1350

+1 about to pull the trigger on this and then I have all the bolt on mods for this LFX as far as I know. Maybe be at 300 whp then.

I think you will be the first to get to 300 on the dyno brother. I have everything you have minus the gears and mine is an automatic. Yours is manual so it should dyno higher. Let us know when it happens and post it. I'm rooting for you!!

[pinoyscorpion951]

Originally Posted by bee1100

I have about $600 maybe a little more and I want parts to make my car faster, I'm going to buy a viteese throttle controller, I have an intake, ported throttle body, catch can, exhaust, tune, apex air scoop, and lowering springs. I want something else to make my car faster but I have no idea what to get, any thoughts? I'll have about 420 left over after the throttle controller.

Originally Posted by hzisfrom1994

Solo high flow cats for 600 in Amazon.

Guys, read the OP's original post! He says he will have 420 left after purchasing the throttle controller. High flow cats and nitrous are out of his price range.

[bee1100]

Originally Posted by pinoyscorpion951

Jacfab intake manifold spacer (extendolator) and ported intaked manifold. He gives you special pricing if you purchase both. Should be about 400 dollars after the core fee is returned. Free shipping. Both have been dyno proven to provide great gains. Easy to install. Take the remaining 20 dollars, gas up and have fun with the new found performance increase.

I found the manifold spacer isolator, but I can't seem to find the ported intake manifold

[lscamaro]

Send him a message. I don't think it's on his website but if you contact him he should be able to do it for u

[bee1100]

Originally Posted by lscamaro

Send him a message. I don't think it's on his website but if you contact him he should be able to do it for u

ok thanks

[pinoyscorpion951]

Originally Posted by lscamaro

Send him a message. I don't think it's on his website but if you contact him he should be able to do it for u

This. He doesn't actively promote the ported manifold because because of the core return issue. He only has a handful of cores to ship and swap out with buyers. He doesn't want orders to get out of control to the point where he has supply issues. Most people cannot wait 2 weeks of vehicle down time which is the time it takes to ship and and then return a core. Mine is a daily driver so I know I don't have that luxury. My suggestion is download the instructions for installation online and study it over and over again for a few days prior to getting the items. That way when you finally receive them, you already know where everything is located and what to do for the install.

[Jason@JacFab]

Originally Posted by bee1100

if I could get them for less than 400 I'd be all for it

You can get ARH high flow cats for $450 new. I'll have a used set with low miles up for sale here in a few weeks.

[bee1100]

Originally Posted by Jason@JacFab

You can get ARH high flow cats for $450 new. I'll have a used set with low miles up for sale here in a few weeks.

roughly how much power do they add? just an estimate, trying to get the most gains, would I see more out of the isolator and ported manifold?

[pinoyscorpion951]

Originally Posted by Jason@JacFab

You can get ARH high flow cats for $450 new. I'll have a used set with low miles up for sale here in a few weeks.

I believe you have to buy a set of O2 extenders for those otherwise they will throw a CEL. The SOLO's come with the extenders.

[Jason@JacFab]

Originally Posted by bee1100

roughly how much power do they add? just an estimate, trying to get the most gains, would I see more out of the isolator and ported manifold?

Solo claimed 15hp / 13tq on an LLT a few years ago on a post. Never come across an actual dyno sheet for either the LLT or an LFX for either SOLO or ARH brand high flow cats. I imagine differences between the two brands in gains would be negligible.

Originally Posted by pinoyscorpion951

I believe you have to buy a set of O2 extenders for those otherwise they will throw a CEL. The SOLO's come with the extenders.

You are correct, but o2 extenders are cheap. SOLO's do have the resonators built onto them to help with the sound, where as ARH does not.

[bee1100]

Originally Posted by Jason@JacFab

You can get ARH high flow cats for $450 new. I'll have a used set with low miles up for sale here in a few weeks.

how much would you want for them and are they easy to install?

[Jason@JacFab]

Originally Posted by bee1100

how much would you want for them and are they easy to install?

sending you a pm on them.