01-31-2015, 11:46 AM | #1 |
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
Critique my list!
Well it's time for my yearly paint correction so I was looking for some critique on my list from the detailing gurus around here. My biggest question is what coating I should go with. I have heard a lot of good things about cquartz and gtechnique exo. I'm looking for one that is easy to apply and that will make aid in washing and drying. Also, any coating I choose will also go on my wheels... not sure if that matters or not. I was looking at the new opticoat product but saw a lot of people complaining about the amount they sell on other detailing forums so that's out. Let me know what you all think.
Nanoskin Fine Sponge (x2) CarPro Reload Meguiar's D101 Bundle CarPro Cquartz 30ml. Kit Ultima Waterless Wash Optimum ONR Sonax Full Effect GlassWow Stuff I'm buying from Adam's: Tire Shine Car Wash Soap Wheel Woolies |
01-31-2015, 12:33 PM | #2 |
Drives: 2013 ZL1 M6 Join Date: Oct 2013
Location: Nor Cal
Posts: 1,825
|
Gtechniq C1 overcoated with 2 coats of Exo is great. Application is a little tricky, and if you screw up the you need to re-polish the panel and re do the process. It does not like water less washes as I have experienced so far. Probably best to use the wash sold by Gtechniq.
http://gtechniqna.com/exterior-coati...ystal-lacquer/ http://gtechniqna.com/exterior-coati...and-shine-kit/ 22PLE is super easy to apply and if you screw up you just use some more to correct it. http://www.detailedimage.com/22ple-M...otection-P961/ I'm itching to try these products as a system. http://www.esotericcarcare.com/kamikaze-ism-coat/ http://www.esotericcarcare.com/kamikazi-over-coat/ http://www.esotericcarcare.com/kamikaze-infinity-wax/ Cquartz is easy to apply and they have their own car wash for the coating. The car wash is also used for washing other coating manufacturers product. The coating can also be used on more than one surface. http://www.detailedimage.com/CarPro-...P923/50-ml-S2/ http://www.detailedimage.com/CarPro-...930/500-ml-S1/ It is just my opinion that once you have the paint correction done, it is best to use the family of products of the coating you plan to use. Here is another coating site to have a look at. http://www.polishangel.us/ Last edited by Nor Cal ZL1; 01-31-2015 at 12:51 PM. |
01-31-2015, 12:47 PM | #3 |
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
C1 is out then. I'll do a little more research on it but if it truly does not like waterless washes, then that defeats the purpose of it for me. I travel a lot and from time to time, I will address a few areas that get dirty while on the road with a waterless wash.
|
01-31-2015, 01:04 PM | #4 |
Drives: 2013 ZL1 M6 Join Date: Oct 2013
Location: Nor Cal
Posts: 1,825
|
I found that water less to be streaky on top of Exo. Might be some wax or something. If you are on the road your car will not get very dirty with a coating anyway. I would feel at ease using a water less wash to remove any dirt that has built up and following up with a detail spray after that.
http://www.pinnaclewax.com/coating-detail-spray.html |
01-31-2015, 01:22 PM | #5 |
|
Exo is much better than CQ IMHO. Exo topped with Sonax PNS is the most hydrophobic, slick surface I've ever seen.
__________________
[B]
|
01-31-2015, 05:24 PM | #6 | |
Drives: 2015 2SS/RS vert, Spring Green Edtn Join Date: Jun 2014
Location: Sarasota, FL
Posts: 1,284
|
Quote:
__________________
2015 2SS/RS vert, Spring Edition Green Flash (2015 - present)
2014 1LT vert, Blue Ray Metallic (2014 - 2015) |
|
01-31-2015, 06:29 PM | #7 |
Drives: 2013 ZL1 M6 Join Date: Oct 2013
Location: Nor Cal
Posts: 1,825
|
Scan data 30 ml will do a Camaro. If you do the C1 plus Exo the exo is usually done in two coats so exo will be 50 mil.
|
01-31-2015, 06:56 PM | #8 |
Drives: 2015 2SS/RS vert, Spring Green Edtn Join Date: Jun 2014
Location: Sarasota, FL
Posts: 1,284
|
Thanks! I'm very much considering using this combo.
__________________
2015 2SS/RS vert, Spring Edition Green Flash (2015 - present)
2014 1LT vert, Blue Ray Metallic (2014 - 2015) |
01-31-2015, 07:48 PM | #9 |
Drives: 2010 ABM SS Join Date: Feb 2011
Location: TX
Posts: 598
|
Agreed!! Thats what I have been using and it is SLICK!!!
__________________
Sold 2010 ABM 2SS RS. Kooks, Corsa CB
|
01-31-2015, 09:58 PM | #10 | |
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
Quote:
Did you put it on your wheels too? |
|
02-01-2015, 12:11 PM | #11 |
|
Yes C1 is unnecessary.
Wheels get just PNS, but certainly could get Exo if you wanted to.
__________________
[B]
|
02-01-2015, 01:20 PM | #12 |
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
Did you buy the 30ml exo or the 50ml to do the whole car? One or two coats?
|
02-01-2015, 01:21 PM | #13 |
|
30ml will easily do two coats. I've done two cars, two coats each on a 50.
__________________
[B]
|
02-26-2015, 11:04 AM | #14 |
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
Well it looks like no one has exo in stock at all. Bummer. I was looking to place a big order from autopia with their current promotion. I guess I'll wait on it
|
|
|
|
|