![]() |
![]() |
#1 |
Moderator
|
Cost of Body Ports Installs?
I have some imperfect paint on my Camaro, and I was wondering if I could cut that off of my car and replace with ports, like the ones from ACS or 3dCarbon. Of course, that means I need more parts, paint, and help with install.
For those of you that did ports, how much did that run you to have a shop do it?
__________________
RDP Motorsport//GEN5DIY//Cultrag Performance//JPSS//Rodgets Chevrolet//
Operation Demon//Buy at Invoice//RACECARWEAR RESPECT ALL CARS. LOVE YOUR OWN. warn 145:159 ban |
![]() |
![]() |
![]() |
#2 |
SHKE BKE
Drives: 2013 Camaro Join Date: May 2014
Location: SoCal
Posts: 3,108
|
nobody wants to help a mod out huh?
I don't think cutting is actually too hard tbh. might be worth a try |
![]() |
![]() |
![]() |
#3 |
![]() |
My camaro has the ACS T3 ports. I had a local shop paint them and I installed them. You need to remove the fascia. I placed mine on two saw horse stands padded with styrofoam to prevent damage while I cut the port openings. If you're doing the T3's, they should come with a template and basic installation instructions. You will need some clamps and a cutting tool. I used my Dremel. The cutting was super easy, just be sure you get the template exact on both side.
|
![]() |
![]() |
![]() |
#4 |
Moderator
|
I appreciate the input.
![]()
__________________
RDP Motorsport//GEN5DIY//Cultrag Performance//JPSS//Rodgets Chevrolet//
Operation Demon//Buy at Invoice//RACECARWEAR RESPECT ALL CARS. LOVE YOUR OWN. warn 145:159 ban |
![]() |
![]() |
![]() |
#5 |
![]() ![]() |
The 3D Carbon fender vents are easy to install if you don't mind cutting into your car. I did mine with a cut off wheel on a angle grinder.. You just have to take your time so you don't melt the paint too bad. If I did them again I would use an air saw (I didn't have it at the time). Make sure you paint all the bare edges so it doesn't corrode. I also used a seam sealer around the inside of the whole vent to be safe.
__________________
CAI intake | OBX LT Headers | Flowmaster AT Exhaust | Trifecta Tune | SS Rear Diff, Axles & Driveshaft Zex 100 Shot Nitrous | Konig Airstrike Wheels | Custom Engine Cover, Fuse Box & Underhood Bowtie Eibach Springs & SS Sway Bars | BMR Strut Brace | Drake Shifter | Vitesse Paddles | 13.26 @ 105.88 mph |
![]() |
![]() |
![]() |
#6 |
SHKE BKE
Drives: 2013 Camaro Join Date: May 2014
Location: SoCal
Posts: 3,108
|
You can probably buy a dremel for less than a shop will charge labor-wise. lol
|
![]() |
![]() |
![]() |
#7 | |
Moderator
|
Cost of Body Ports Installs?
Quote:
That may be the case, although I'd then have to find more uses for it. ![]()
__________________
RDP Motorsport//GEN5DIY//Cultrag Performance//JPSS//Rodgets Chevrolet//
Operation Demon//Buy at Invoice//RACECARWEAR RESPECT ALL CARS. LOVE YOUR OWN. warn 145:159 ban |
|
![]() |
![]() |
![]() |
#8 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2014 2SS/RS Camaro Join Date: Dec 2014
Location: Kentucky
Posts: 2,421
|
Quote:
You'd be surprised at the things you can use a Dremel on. It is one of the handiest tools I've ever owned. They literally make about 100 different bits for the thing.
__________________
2014 2SS/RS, L99, SW LTH w/HF Cats, GMPP Ex. Z/28 CAI, FR41s in PVD Black Chrome, Recaros, Pfadt Sway
377hp, 383tq 12.739@110.44 MPH |
|
![]() |
![]() |
![]() |
#9 |
Moderator
|
![]() I have some beautiful ACS primed bumper ports and am interested in anyone's experiences painting them. What did you do?
__________________
RDP Motorsport//GEN5DIY//Cultrag Performance//JPSS//Rodgets Chevrolet//
Operation Demon//Buy at Invoice//RACECARWEAR RESPECT ALL CARS. LOVE YOUR OWN. warn 145:159 ban |
![]() |
![]() |
![]() |
#10 | |
700RWHP-650TQ
Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,269
|
Quote:
![]() ![]() and then glued and clamped in place. ![]() ![]() ![]() ![]()
__________________
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL |
|
![]() |
![]() |
![]() |
#11 |
Moderator
|
Cost of Body Ports Installs?
Yours came out incredible! I’m planning to paint mine satin or matte black.
Did yours come primed? Did you apply new primer or just paint?
__________________
RDP Motorsport//GEN5DIY//Cultrag Performance//JPSS//Rodgets Chevrolet//
Operation Demon//Buy at Invoice//RACECARWEAR RESPECT ALL CARS. LOVE YOUR OWN. warn 145:159 ban |
![]() |
![]() |
![]() |
#12 | |
700RWHP-650TQ
Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,269
|
Quote:
Seems like such a long time ago. Don't have this setup anymore ![]()
__________________
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL |
|
![]() |
![]() |
![]() |
#13 |
Account Suspended
Drives: 2019 SS 2019 mustang GT Join Date: Apr 2017
Location: California
Posts: 1,694
|
Hey if you need help painting those parts and install them in your bumper I wouldn't mind giving you a hand
|
![]() |
![]() |
![]() |
#14 |
700RWHP-650TQ
Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,269
|
That first cut is always the hardest!!
![]()
__________________
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL |
![]() |
![]() |
|
|
![]() |
|
|