Magnaflow Comp Series Exhaust Pics - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RedJewel2SS · 08-01-2009, 01:33 AM

Quote:

Originally Posted by SGOS252382

5'' polished tips.

The GMPP tips are 4.5'' and we're getting worried about melting of the plastic (after the recent thread about it). It will be interesting to see if anyone with the Magna Flow 5" tips runs into this isssue, especially since they are even bigger than the GMPP tips.

if you look on my first thread of the tips off the car, the first pic of the close up of the tips shows a 4" tube inside the tips. this is a heat shield for the tips, i have driven all around town in it today and the polished part is only warm to the touch, didnt even burn my skin! if you get this system i highly recommend painting the inside of the tips with high heat black paint like i did, makes it look much better!

i just installed the system today and will have pics up in the morning!

RedJewel2SS · 08-01-2009, 01:34 AM

Quote:

Originally Posted by RoyalKev

Cmon man im dying to here these things before I order, the sound clip on the website does no justice.

i'll post it tomorrow, just installed the system today!

RedJewel2SS · 08-01-2009, 01:35 AM

Quote:

Originally Posted by 96rss/ls6

This goes exactly with my post on 5 in tips, can one of you guys with magnaflow shoot me a pm with a price for just those tips. I alreadygot a set but they had the 4 inch inlet and you can imagine how that worked. Oh and im very interested in hearing any input about the rear melting, dont want that crap happening, aree these double or single wall?

i'm not sure if they sell them separately or not, b/c they're welded onto the tubing. you'd have to call magnaflow to find out.

RedJewel2SS · 08-01-2009, 01:39 AM

Quote:

Originally Posted by Diabel1969

They look nice. I have a Magnaflow exhaust on my truck also SS, however the pipe from the cat to the muffler has rusted quite a bit in 1 years time, and the tips have discolored horribly. They turn that brass color, so expect that change!..

it shouldn't rust since its stainless steel. i hope my tips don't do that! magnaflow has a lifetime warranty, you might want to look into that.

RedJewel2SS · 08-01-2009, 01:43 AM

Quote:

Originally Posted by Legend

Looks like a great system...very well made and put together!!

I have Magnaflow pipes as well, stainless too, all mandrel bent for my muffler delete. No 5 inch tips though...went with stock.

I'm sure the 5 inch tips will provide a deeper sound than stock...very nice!

yea the car has a pretty deep sound to it. i'll post pics and video tomorrow!

RedJewel2SS · 08-01-2009, 11:42 AM

pics and vids are now posted on the first post!

khislop007 · 08-02-2009, 03:04 PM

I can't wait to hear it with the ARH LT. This is the same set up I am going to run.

RoyalKev · 08-02-2009, 09:22 PM

Ive seriously drooled all over my self with the video of you revving, im getting these when spring rolls around.

SPAWN · 08-02-2009, 10:04 PM

Its a shame that GM didn't make a mid pipe with a bolt on Muffler like FORD did.

If you install this piece it looks like you have to cut the factory system around the hangers at the pumpkin. The SLP like I just installed in the wife's car was cut 1.75 inches past the weld behind the muffler.

Seems if you want to install a different setup after the fact because you don't like the sound you could be SOL. I guess the shops don't think it is a issue to cut off a stainless system then weld a piece of crap back in to adjust it for another setup. I would think just a little common sense about trying to keep things similar or think that far in advance when they designed it since they had years of looking at what the mustang did to keep it simple and standard for all the aftermarket guys.

Michael_Js · 08-19-2009, 07:39 PM

Do you think the 5" tips would work with the rear Ground Effects on??

Silver Ice Man · 08-19-2009, 07:55 PM

Quote:

Originally Posted by Michael_Js

Do you think the 5" tips would work with the rear Ground Effects on??

I 2nd that question, just got my GFX and am debating weather or not to install them.

Michael_Js · 08-20-2009, 02:18 AM

Ok, don't think so! here's the response to that question:

"You will need to get the GMPP version which is part # 16482 for the GMPP GFX. I don't have pricing or availability as of now; hopefully I can get it soon. Generally speaking Dealerships like to mark these systems up and charge a good amount of money to install them. It really is a straight forward install and it might save you some $$.

Please feel free to call or email us anytime! We are a WD for Magnaflow so we can set the Dealership up as well; just have them call or email us. Have a great evening and we appreciate your interest in JDP Motorsports products!

JP"

We'll have to wait more!

Grimelock2009 · 08-20-2009, 02:52 AM

If you go on www.marylandspeed.com, you can get this exhaust for 374.95 which includes shipping.....

Camaro Bruce · 08-20-2009, 07:41 AM

I went to marylandspeed.com and saw 480..???...

08-01-2009, 11:42 AM	#34
RedJewel2SS 12.23s@113mph Drives: 2SS/RS, A6, just a few bolt ons Join Date: Jul 2009 Location: Houston, TX Posts: 1,197	pics and vids are now posted on the first post! __________________ RIP Cammie 7/15/2009 - 4/1/2011 Last edited by RedJewel2SS; 08-01-2009 at 01:39 PM.

08-02-2009, 03:04 PM	#35
khislop007 ZEUSS Drives: Hard! Join Date: Sep 2008 Location: Cayman Islands Posts: 2,567 View My Garage	I can't wait to hear it with the ARH LT. This is the same set up I am going to run. __________________

08-02-2009, 10:04 PM	#37
SPAWN Drives: 2009 GT500 Join Date: Jul 2009 Location: Jacksonvile Posts: 21 View My Garage	Its a shame that GM didn't make a mid pipe with a bolt on Muffler like FORD did. If you install this piece it looks like you have to cut the factory system around the hangers at the pumpkin. The SLP like I just installed in the wife's car was cut 1.75 inches past the weld behind the muffler. Seems if you want to install a different setup after the fact because you don't like the sound you could be SOL. I guess the shops don't think it is a issue to cut off a stainless system then weld a piece of crap back in to adjust it for another setup. I would think just a little common sense about trying to keep things similar or think that far in advance when they designed it since they had years of looking at what the mustang did to keep it simple and standard for all the aftermarket guys. __________________ Pony Wars Founder RichV@Showandgofast NMRA True Street Bradenton 12.0 3rd place March 5th 2011, NMRA Bradenton True Street 12.0 Winner! March 6th 2010, NMCA Bradenton True Street 12.0 Winner! March 20th 2010, NHRA Unleashed 12.0 Qualifier November 5-6 2010,

08-19-2009, 07:39 PM	#38
Michael_Js SoCal C5 Family Member Drives: 2010 Camaro SS/RS - Black w/IOM; 6M Join Date: Jul 2009 Location: San Diego, CA, USA Posts: 5,298 View My Garage	Do you think the 5" tips would work with the rear Ground Effects on?? __________________ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~ 2010 Black 2SS/RS; 6M; IOM, GFX, sunroof; ADM Race CAI; Zoomers CB; Viper Alarm; Pdaft F&R sways, Adj Endlinks, Rtrailing arms, Camber kit, strut brace, Front Trailing Arm Bushing; SLP Skip-Shift Elim; Tinted lights/windows; Hurst Short-throw; LoJack; Door & Dash ABL Mods; ********; JBA Shorty headers; AACStyle LEDs; Stillen DS rotors, Hawk Ceramic pads; Havoc Blk Chrome wheels: 20x9s; Lingenfelter Blk Al Pedals; RevXtreme Catch Can; Goodridge SS lines; Ported TB; RK Sport hood; Hotchkis chassis brace; KW V3 coilovers;

08-20-2009, 02:18 AM	#40
Michael_Js SoCal C5 Family Member Drives: 2010 Camaro SS/RS - Black w/IOM; 6M Join Date: Jul 2009 Location: San Diego, CA, USA Posts: 5,298 View My Garage	Ok, don't think so! here's the response to that question: "You will need to get the GMPP version which is part # 16482 for the GMPP GFX. I don't have pricing or availability as of now; hopefully I can get it soon. Generally speaking Dealerships like to mark these systems up and charge a good amount of money to install them. It really is a straight forward install and it might save you some $$. Please feel free to call or email us anytime! We are a WD for Magnaflow so we can set the Dealership up as well; just have them call or email us. Have a great evening and we appreciate your interest in JDP Motorsports products! JP" We'll have to wait more! __________________ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~ 2010 Black 2SS/RS; 6M; IOM, GFX, sunroof; ADM Race CAI; Zoomers CB; Viper Alarm; Pdaft F&R sways, Adj Endlinks, Rtrailing arms, Camber kit, strut brace, Front Trailing Arm Bushing; SLP Skip-Shift Elim; Tinted lights/windows; Hurst Short-throw; LoJack; Door & Dash ABL Mods; ********; JBA Shorty headers; AACStyle LEDs; Stillen DS rotors, Hawk Ceramic pads; Havoc Blk Chrome wheels: 20x9s; Lingenfelter Blk Al Pedals; RevXtreme Catch Can; Goodridge SS lines; Ported TB; RK Sport hood; Hotchkis chassis brace; KW V3 coilovers;

08-02-2009, 09:22 PM	#36
RoyalKev Drives: 2010 Camaro SS Join Date: Jan 2009 Location: Maryland Posts: 973	Ive seriously drooled all over my self with the video of you revving, im getting these when spring rolls around.

08-20-2009, 02:52 AM	#41
Grimelock2009 Drives: 2010 Camaro Join Date: Mar 2009 Location: Goodyear AZ Posts: 254	If you go on www.marylandspeed.com, you can get this exhaust for 374.95 which includes shipping.....

08-20-2009, 07:41 AM	#42
Camaro Bruce repn UCF Drives: 08 Riot Join Date: Apr 2009 Location: Melbourne, FL Posts: 30	I went to marylandspeed.com and saw 480..???... __________________ __________________ CGM 1SS/RS, Black Rally Stripes, BA system upgrade 1100, Preliminary order accepted - 4/30/09 2000, Order accepted by GM - 5/21/09 2500, Preferenced - 5/26/09 3000, Order accepted by production control - 5/27/09 3100, Order available to sequence - 6/16/09 3300, Order scheduled for production - 6/16/09 3400, Order broadcast - 6/29/09 3800, Order produced -7/2/09 #2G1FS1EW4A9123856 4000, Available to ship 4200, Shipped 4300, Intermediate Delivery 4B00, Bayed 5000, Delivered to the dealer 6000, Delivered to the customer