BMR Motor Mounts (Poly) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

AF1Strider · 09-10-2014, 07:02 PM

I just installed some BMR Poly Bushing Motor Mounts and I have a pretty good vibe when I start off in first gear, but that's really it. I was wondering if other people with the BMR mounts have the same kind of vibe or if I missed something on the install.

JDP Sales · 09-10-2014, 07:41 PM

NVH is a common byproduct of poly engine mounts. It will ease up a little over time as the poly breaks in, but you'll always have more vibrations than stock; it's just the nature of the beast.

Best regards,

Tyler
888-308-6007

AF1Strider · 09-10-2014, 10:38 PM

Yea I was expecting some more NVH, it is just rough on take off in first gear. No other problem in any gear while driving. I checked the install and it seemed the passenger side mount was a little loose. I tightened it up some and it felt a little better. I'm gonna try and get it tighter tomorrow and see how it feels. Other than that it feels better with the new mounts.

BMR Sales · 09-11-2014, 09:26 AM

Yeah, the mounts felt a little "rough" on my car too when I first put them on....it will mellow out after a few hundred miles. I can't tell the difference from stock now.

Broke Pilot · 09-13-2014, 03:01 PM

Hey Keith, do y'all have the mounts in stock? I'm about to throw on a set of long tubes and figure while I've got the clearance... Thanks bro!

Sorry for a short hijack, OP, all is well with the mounts now?

BMR Sales · 09-13-2014, 05:02 PM

Last time I looked we had a couple sets in the Black Hammertone color on the shelf, ready to ship. We can make up a set in red in just a couple days.

Broke Pilot · 09-13-2014, 05:19 PM

Excellent... Thank you sir. Color doesn't matter, hopefully I won't see them again for a long time!

AF1Strider · 09-14-2014, 05:02 PM

Yea all is well, still some vibes on launch but other then that can't tell the difference. FYI to make it easier to install remove the front tires.

Broke Pilot · 09-14-2014, 08:33 PM

They'll be off.. I'll be installing some TSP 2" headers! Lol

Rcfiddy1 · 09-14-2014, 09:53 PM

Just finished up mine today and must say they do let you know your motor is running. My car is pretty noisey already due to LTs, hi flow cats and cam so a little more nvh is not a big deal.. Did you use the plates under the mounts or did you lower the engine 1/4 inch?

AF1Strider · 09-15-2014, 02:24 PM

I lowered the engine, I figured why not. I love the feel of the solid mounts, just the rattle at launch is annoying, but seems to be getting better.

Rcfiddy1 · 09-16-2014, 03:49 PM

I lowered also.

RaptorGXP · 03-05-2015, 12:26 AM

I just got my bmr mounts and trying to put them together. But can't fit the poly bushing thru the hole in the mount. Is it suppose to go in the hole or just on it?

BMR Sales · 03-05-2015, 04:37 PM

The Bushing a 2 Piece design that Sandwichs the Mount

Here are the Solid Bushing Option

And here is the Assembled Mount

09-10-2014, 07:02 PM	#1
AF1Strider Drives: 2011 Camaro 1SS/RS Join Date: Jan 2007 Location: Navarre, FL Posts: 496 View My Garage	BMR Motor Mounts (Poly) I just installed some BMR Poly Bushing Motor Mounts and I have a pretty good vibe when I start off in first gear, but that's really it. I was wondering if other people with the BMR mounts have the same kind of vibe or if I missed something on the install.

09-13-2014, 03:01 PM	#5
Broke Pilot Drives: '14 1SS 1LE,'68 Chevelle,'70 Vette Join Date: Jan 2014 Location: Conroe/Sugarland, TX Posts: 227	Hey Keith, do y'all have the mounts in stock? I'm about to throw on a set of long tubes and figure while I've got the clearance... Thanks bro! Sorry for a short hijack, OP, all is well with the mounts now? __________________ Overkill is underrated....

09-13-2014, 05:19 PM	#7
Broke Pilot Drives: '14 1SS 1LE,'68 Chevelle,'70 Vette Join Date: Jan 2014 Location: Conroe/Sugarland, TX Posts: 227	Excellent... Thank you sir. Color doesn't matter, hopefully I won't see them again for a long time! __________________ Overkill is underrated....

09-14-2014, 08:33 PM	#9
Broke Pilot Drives: '14 1SS 1LE,'68 Chevelle,'70 Vette Join Date: Jan 2014 Location: Conroe/Sugarland, TX Posts: 227	They'll be off.. I'll be installing some TSP 2" headers! Lol __________________ Overkill is underrated....

09-14-2014, 09:53 PM	#10
Rcfiddy1 Sold car... Drives: 2010 Rally Yellow 2SS/RS #37115 Join Date: Oct 2009 Location: Manalapan, New Jersey Posts: 2,019 View My Garage	Just finished up mine today and must say they do let you know your motor is running. My car is pretty noisey already due to LTs, hi flow cats and cam so a little more nvh is not a big deal.. Did you use the plates under the mounts or did you lower the engine 1/4 inch? __________________ Build Thread ECS Novi 1500 Supercharged, LS3 conversion, Small blower cam, Alky Meth injection, 3:45 rear, BMR Suspension parts, 1LE Sways, Billy Boat ZL1 dual mode exhaust.

09-10-2014, 07:41 PM	#2
JDP Sales Drives: Chevys at the limit Join Date: Nov 2010 Location: SLC, UT Posts: 9,621	NVH is a common byproduct of poly engine mounts. It will ease up a little over time as the poly breaks in, but you'll always have more vibrations than stock; it's just the nature of the beast. Best regards, Tyler 888-308-6007

09-10-2014, 10:38 PM	#3
AF1Strider Drives: 2011 Camaro 1SS/RS Join Date: Jan 2007 Location: Navarre, FL Posts: 496 View My Garage	Yea I was expecting some more NVH, it is just rough on take off in first gear. No other problem in any gear while driving. I checked the install and it seemed the passenger side mount was a little loose. I tightened it up some and it felt a little better. I'm gonna try and get it tighter tomorrow and see how it feels. Other than that it feels better with the new mounts.

09-11-2014, 09:26 AM	#4
BMR Sales Drives: Race Car Join Date: Sep 2009 Location: Seffner, FL Posts: 6,226	Yeah, the mounts felt a little "rough" on my car too when I first put them on....it will mellow out after a few hundred miles. I can't tell the difference from stock now.

09-13-2014, 05:02 PM	#6
BMR Sales Drives: Race Car Join Date: Sep 2009 Location: Seffner, FL Posts: 6,226	Last time I looked we had a couple sets in the Black Hammertone color on the shelf, ready to ship. We can make up a set in red in just a couple days.

09-14-2014, 05:02 PM	#8
AF1Strider Drives: 2011 Camaro 1SS/RS Join Date: Jan 2007 Location: Navarre, FL Posts: 496 View My Garage	Yea all is well, still some vibes on launch but other then that can't tell the difference. FYI to make it easier to install remove the front tires.

09-15-2014, 02:24 PM	#11
AF1Strider Drives: 2011 Camaro 1SS/RS Join Date: Jan 2007 Location: Navarre, FL Posts: 496 View My Garage	I lowered the engine, I figured why not. I love the feel of the solid mounts, just the rattle at launch is annoying, but seems to be getting better.

09-16-2014, 03:49 PM	#12
Rcfiddy1 Sold car... Drives: 2010 Rally Yellow 2SS/RS #37115 Join Date: Oct 2009 Location: Manalapan, New Jersey Posts: 2,019 View My Garage	I lowered also. __________________ Build Thread ECS Novi 1500 Supercharged, LS3 conversion, Small blower cam, Alky Meth injection, 3:45 rear, BMR Suspension parts, 1LE Sways, Billy Boat ZL1 dual mode exhaust.

03-05-2015, 12:26 AM	#13
RaptorGXP Drives: 2009 G8 GXP M6 Join Date: Dec 2013 Location: Los Angeles Posts: 59	I just got my bmr mounts and trying to put them together. But can't fit the poly bushing thru the hole in the mount. Is it suppose to go in the hole or just on it?

03-05-2015, 04:37 PM	#14
BMR Sales Drives: Race Car Join Date: Sep 2009 Location: Seffner, FL Posts: 6,226	The Bushing a 2 Piece design that Sandwichs the Mount Here are the Solid Bushing Option And here is the Assembled Mount