Camaro Fest VI - Drag Racing (Beech Bend Raceway) - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

racergirl · 03-06-2015, 06:47 PM

Quote:

Originally Posted by mlee

We've tried that twice before. If we have enough cars we will... but will have to wait and see if that happens. Track time decision for this one.

This is the exact setup as last year and I don't believe we had a single V6 FI car.

There was 2 FI V6 Camaros

*mlee* · 03-06-2015, 06:50 PM

Quote:

Originally Posted by racergirl

There was 2 FI V6 Camaros

Certainly not enough for 2 classes when there were only 3 non FI

Ace0751 · 03-06-2015, 08:18 PM

Might need to buy new rears just for the event lol.

HeLLDaFieL · 03-06-2015, 08:24 PM

Stock V8 and M6 street tires for me.

(and bracket?)

*mlee* · 03-07-2015, 07:14 AM

Quote:

Originally Posted by HeLLDaFieL

Stock V8 and M6 street tires for me.

(and bracket?)

Hell Yeah... Do it all...

This is why we have Brackets... for those who don't fit in a class or as an additional class to run.

HeLLDaFieL · 03-07-2015, 08:09 AM

Quote:

Originally Posted by mlee

Hell Yeah... Do it all...

This is why we have Brackets... for those who don't fit in a class or as an additional class to run.

Bracket it is, I might as well get the most out of the helmet I ordered.

Heaven_is_inferno_orange · 03-07-2015, 10:52 AM

I want to run the M6 class for sure. Just don't know if I want to run Modified or bracket to or just M6. Sasuke is mostly for show so I dunno if I want to clean that much track from his wheel wells.

sscamaro · 03-07-2015, 11:28 AM

Can you do M6 street tires with forced induction?

*mlee* · 03-07-2015, 11:41 AM

Quote:

Originally Posted by sscamaro

Can you do M6 street tires with forced induction?

Yes, exactly as described in the OP. "Any M6 5th Gen"

HeLLDaFieL · 03-07-2015, 11:45 AM

Quote:

Originally Posted by Heaven_is_inferno_orange

I want to run the M6 class for sure. Just don't know if I want to run Modified or bracket to or just M6. Sasuke is mostly for show so I dunno if I want to clean that much track from his wheel wells.

I heard that can use Glad Cling Wrap Plastic Wrap on the wheel wells, then just peel it off. I don't know it if works but I willing to try it.

Merc · 03-07-2015, 12:22 PM

Quote:

Originally Posted by HeLLDaFieL

I heard that can use Glad Cling Wrap Plastic Wrap on the wheel wells, then just peel it off. I don't know it if works but I willing to try it.

You can also spray a little "Pam" on the inner wheel wells for easy clean up later.

HeLLDaFieL · 03-07-2015, 12:59 PM

Quote:

Originally Posted by Merc

You can also spray a little "Pam" on the inner wheel wells for easy clean up later.

food wrap, Pam...it's the Camaro cooking show.

Heaven_is_inferno_orange · 03-07-2015, 01:18 PM

Lol the ideas sound good. Perhaps ill guinea pig it on the husbands Z first. XD I don't have to scrub her wheel wells after all.

Merc · 03-07-2015, 01:20 PM

Quote:

Originally Posted by HeLLDaFieL

food wrap, Pam...it's the Camaro cooking show.

Then I use Adams Undercariage Cleaner and a brush and it cleans up nicely. Driveway smells like grapes after.

03-06-2015, 08:18 PM	#17
Ace0751 GEN5 Detail Drives: 2011 Synergy Series 2SS Convertible Join Date: Sep 2014 Location: Northeast, OH Posts: 1,986	Might need to buy new rears just for the event lol. __________________ Roto-Fab CAI, Borla ATAK Exhaust System, Stainless Power Headers, RX Performance Catch Can, ACS T4 Splitter, Oracle side markers, Dyno Tuned by RDP Motorsports

03-06-2015, 08:24 PM	#18
HeLLDaFieL Drives: 2013 Camaro 1LE 2SS Join Date: Sep 2014 Location: Palm Coast, FL Posts: 436 View My Garage	Stock V8 and M6 street tires for me. (and bracket?) __________________ *I stepped on cornflakes, now I'm a cereal killer.*

03-07-2015, 10:52 AM	#21
Heaven_is_inferno_orange Savage Setsuna Drives: 16' 2SS, 12 ZL1, RIP Sasuke Join Date: Sep 2011 Location: Fort Knox KY Posts: 1,379 View My Garage	I want to run the M6 class for sure. Just don't know if I want to run Modified or bracket to or just M6. Sasuke is mostly for show so I dunno if I want to clean that much track from his wheel wells. __________________ Sasuke's Build Thread http://www.camaro5.com/forums/showthread.php?p=5352161&posted=1#post5352161

03-07-2015, 01:18 PM	#27
Heaven_is_inferno_orange Savage Setsuna Drives: 16' 2SS, 12 ZL1, RIP Sasuke Join Date: Sep 2011 Location: Fort Knox KY Posts: 1,379 View My Garage	Lol the ideas sound good. Perhaps ill guinea pig it on the husbands Z first. XD I don't have to scrub her wheel wells after all. __________________ Sasuke's Build Thread http://www.camaro5.com/forums/showthread.php?p=5352161&posted=1#post5352161

03-07-2015, 11:28 AM	#22
sscamaro Drives: 2010 2SS, 2017 Silverado LTZ Join Date: Jan 2007 Location: Denver,PA Posts: 3,195 View My Garage	Can you do M6 street tires with forced induction?