are the seat belts different for years and models? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

TrillChevyRyda · 02-18-2015, 08:30 PM

i swapped seats with someone who had a 2011 RS camaro. I have a 2010 2SS and the seat belts do not click in. the seat belt buckle came from his car as they are attached to the seats. My buckle lock does not even come close to fitting. well anyways he sold his so i cant swap em out

Im looking for the correct seat belt buckles that match the 2011 RS..not sure if if they are different because of the year or model. any info?

2SSRS@Gen5diy · 02-19-2015, 09:42 AM

Yes 2010 is a car onto its self, but you can remove the seat belt buckle out of the 2010 seats and mount them in your new seats.

Char1ieone · 03-17-2015, 01:08 PM

Quote:

Originally Posted by 2SSRS@Gen5diy

Yes 2010 is a car onto its self, but you can remove the seat belt buckle out of the 2010 seats and mount them in your new seats.

Can you direct me to a thread that describes the process? I too have the same issue with my new 2011 seats swapped into my 2010 SS.

2SSRS@Gen5diy · 03-17-2015, 01:21 PM

There is only one bolt on the side of the seat for the seat belt buckle, its a torx dont remember the size, and one 2 pin connecter under the seat, there the same connector so your good to go.

Char1ieone · 03-17-2015, 10:29 PM

THANKS! Its was very easy, aside from having to remove both seats again and then realizing that it's only the driver side belt fastener that needs to be swapped. Oh well, hahaha.

02-18-2015, 08:30 PM	#1
TrillChevyRyda Drives: 2011 2SS Camaro/79 Caprice LS Join Date: Oct 2011 Location: DFW Texas Posts: 242	are the seat belts different for years and models? i swapped seats with someone who had a 2011 RS camaro. I have a 2010 2SS and the seat belts do not click in. the seat belt buckle came from his car as they are attached to the seats. My buckle lock does not even come close to fitting. well anyways he sold his so i cant swap em out Im looking for the correct seat belt buckles that match the 2011 RS..not sure if if they are different because of the year or model. any info? Attached Images __________________

02-19-2015, 09:42 AM	#2
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	Yes 2010 is a car onto its self, but you can remove the seat belt buckle out of the 2010 seats and mount them in your new seats.

03-17-2015, 01:21 PM	#4
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	There is only one bolt on the side of the seat for the seat belt buckle, its a torx dont remember the size, and one 2 pin connecter under the seat, there the same connector so your good to go.

03-17-2015, 10:29 PM	#5
Char1ieone Fear the Red Bow Tie Drives: 2010 Black Camaro 2SS/RS LS3 Join Date: Jun 2009 Location: La Mesa/Las Cruces, NM & El Paso, TX Posts: 1,762 View My Garage	THANKS! Its was very easy, aside from having to remove both seats again and then realizing that it's only the driver side belt fastener that needs to be swapped. Oh well, hahaha.