You are browsing camaro5 
 |
|
03-20-2015, 08:59 PM
|
#1 |
|
Faster Mabricator
Drives: 73 Camaro with 5th gen stuff Join Date: Oct 2014
Location: Boston
Posts: 92
|
5th Gen Camaro Brembos... with a z06 hub.
Greetings,
If you check my build thread on Lat-g, you'd see that we put a 5th Gen Camaro IRS into the back of my 73 Camaro. So far, we used the Camaro knuckles with a Z06 unit bearing. The Camaro Brembo rotor fits loosely over the wheel studs, but not the unit bearing register. Before I open up the Camaro rotors on a lathe, is there a stock rotor that will fit Z06 pattern, the Camaro SS in rotor hat e-brake shoes and Brembo SS caliper? I am thinking Z06 rotor, but it's an expensive experiment, since I can't return the rotor if I fit it up. |
|
|
|
03-20-2015, 10:33 PM
|
#2 |
|
Faster Mabricator
Drives: 73 Camaro with 5th gen stuff Join Date: Oct 2014
Location: Boston
Posts: 92
|
For the record, I flopped back to the Camaro hubs and they fit the Corvette Z06 rims I have.
|
|
|
|
|
03-21-2015, 12:54 PM
|
#3 |
          
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,155
|
Don't have any answers for you but I really like the 2nd gen cars could you post a pic of your car???
|
|
|
|
|
03-21-2015, 01:00 PM
|
#4 | |
|
Faster Mabricator
Drives: 73 Camaro with 5th gen stuff Join Date: Oct 2014
Location: Boston
Posts: 92
|
Quote:
It's certainly still a work in progress. For the record, I have a solution  . Don't use the ZO6 rear hubs.
|
|
|
|
|
|
03-21-2015, 11:32 PM
|
#5 |
|
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,155
|
NIIIIICE!!!!!!
|
|
|
|
|
|
|
|
 |
|
|
