What Did You Do To Your Camaro Today? - Page 956 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Daxal84 · 04-03-2015, 06:17 PM

Quote:

Originally Posted by cmracing

Finally installed the Elite Engineering catch can. Wish I had smaller hands, but got it done in less than an hour.

Installed mine over the weekend. I feel you on the small hands.

Ordered Air suspension today for the ride. Should be interesting.

Candr3535 · 04-03-2015, 06:50 PM

JD-zl1. You only get about 10 to 20 rear wheel hp from headers. Remember your car is really only got 475 to 500 rear wheel hp from the factory. Depends on the motor. My car was tuned for 93. Also. It's really a different car now. Btw I used dyna-tech. Fit was perfect.

cottrellj2 · 04-03-2015, 08:09 PM

Daltronic · 04-03-2015, 08:16 PM

Quote:

Originally Posted by TheSmokingSuns

Looks beast, how much did the louvers cost and did you install yourself?

they cost me 250$ I bought them used off some guy in town and I did install them myself was a relatively easy instal

layzurguy · 04-03-2015, 09:33 PM

Quote:

Originally Posted by cottrellj2

Very nice. Great color.

Spec · 04-03-2015, 09:35 PM

Bad Ass! Love the hood... been considering something like that.

cottrellj2 · 04-03-2015, 09:41 PM

The hood is the VIS terminator hood. There is a vendor with a big discount here:

http://www.camaro5.com/forums/showthread.php?t=276581

This one and the Seibon ones are very popular. I went with carbon fiber to save some money on paint. The best part was that it uses all the original hardware and you only need hood pins if you plan on exceeding 120mph.

So eventually, I may need to add hood pins... lol.

Spec · 04-03-2015, 10:08 PM

I think they'd be a nice touch.

Trying to imagine mine with all that. Its why I haven't added my side rockers and my APR splitter yet... the CF Hood from Seibon is looking really good if I go CF side rockers, CF rear slats, and CF Spoiler.

Thanks for the pics! We all sometimes don't truly realize how helpful they are.

BIO-HAZARD · 04-04-2015, 12:57 AM

Quote:

Originally Posted by ToolFan66

Ordered my Borla S-TYPE cat back exhaust to go with my Kooks LT headers that I received a couple weeks ago... I also ordered my Bo White ported throtlebody last week..

I have the same exhaust tool fan, you'll like it.

BIO-HAZARD · 04-04-2015, 01:10 AM

Got the 2nd part of the engine bay lights done today . Installed the controler & power harness . Turned them on and enjoyed the for a little while. Also put on the new radio bezel ,custom painted by Lupe . Simply stunning . The and ed some trim molding around the new ACS painted hoodliner . And also put this around the bottom on my ACS T5 splitter. This is a cheap mod to add detail .Love it so much I'll be putting it around the ACS rockers panels to..Here's a few pics & video of the light. Sorry not the best.

Name: 20150403_171318.jpg
Views: 620
Size: 101.8 KB

Name: 20150403_171318.jpg
Views: 620
Size: 101.8 KB

Name: 20150403_171333.jpg
Views: 628
Size: 98.2 KB

Name: 20150403_171418.jpg
Views: 631
Size: 127.4 KB

Name: 20150403_171505.jpg
Views: 625
Size: 122.8 KB

Name: 20150403_171425.jpg
Views: 615
Size: 131.9 KB

Name: DSCN1423.jpg
Views: 642
Size: 227.7 KB

USCAMARO14 · 04-04-2015, 04:22 AM

Installed my leather seats.

pyroguy · 04-04-2015, 10:50 AM

Technically not today anymore, but with Good Friday yesterday I didn't get the post in with church...

I installed Solo Mach XL catback exhaust. LOVE it so far! A little quieter than I expected, but then again I don't have long tubes yet.

Red2014SS · 04-04-2015, 01:08 PM

I added FR41 wheels in PVD Black Chrome... 10x11 setup with Toyo Proxies! I am very happy!!!

MrIanB · 04-04-2015, 02:56 PM

Nothing, about to rain next two days, damn it.

Ian B

04-03-2015, 06:50 PM	#13372
Candr3535 Drives: 2013 ZL1 Triple Black Vert M6 #5591 Join Date: May 2013 Location: Galloway,NJ Posts: 747 View My Garage	JD-zl1. You only get about 10 to 20 rear wheel hp from headers. Remember your car is really only got 475 to 500 rear wheel hp from the factory. Depends on the motor. My car was tuned for 93. Also. It's really a different car now. Btw I used dyna-tech. Fit was perfect. __________________ 695 RWHP / 660 RWTQ @ 13.5 PSI Dyna-Tech Headers Ceramic Coated w/Super Flo Cats, JRE Custom Rough Idle Racing Cam Package and 125 RWHP Pulley Kit w/ 28% pulley, Custom Tune by Ted, ID850 injectors, JMS Fuel Booster, NGK Plugs, MSD Plug Wires, Roto-Fab CAI, Roto-Fab Big Gulp, Elite Catch Can, Mild to Wild, 90mm VMaxx Ported Throttle Body, Skip Shift Elim., D3 Coolant Resevoir, Separated Clutch Resevoir, and Fuzzy Red Dice..

04-03-2015, 08:09 PM	#13373
cottrellj2 Blue Ray SCPO Drives: 2013 Camaro 2SS/RS Join Date: Mar 2013 Location: San Diego, CA Posts: 61 View My Garage	Phantom Grille __________________

04-03-2015, 09:41 PM	#13377
cottrellj2 Blue Ray SCPO Drives: 2013 Camaro 2SS/RS Join Date: Mar 2013 Location: San Diego, CA Posts: 61 View My Garage	The hood is the VIS terminator hood. There is a vendor with a big discount here: http://www.camaro5.com/forums/showthread.php?t=276581 This one and the Seibon ones are very popular. I went with carbon fiber to save some money on paint. The best part was that it uses all the original hardware and you only need hood pins if you plan on exceeding 120mph. So eventually, I may need to add hood pins... lol. __________________

04-04-2015, 01:10 AM	#13380
BIO-HAZARD INFECTED Drives: 2011 1LT Synergy Green Join Date: May 2011 Location: Upstate PA Posts: 3,226	Got the 2nd part of the engine bay lights done today . Installed the controler & power harness . Turned them on and enjoyed the for a little while. Also put on the new radio bezel ,custom painted by Lupe . Simply stunning . The and ed some trim molding around the new ACS painted hoodliner . And also put this around the bottom on my ACS T5 splitter. This is a cheap mod to add detail .Love it so much I'll be putting it around the ACS rockers panels to..Here's a few pics & video of the light. Sorry not the best. __________________ http://www.camaro5.com/forums/showthread.php?t=485533

04-04-2015, 04:22 AM	#13381
USCAMARO14 Drives: 2LS 2014 Join Date: Oct 2013 Location: Staten ISland Posts: 3,404	Installed my leather seats. __________________

04-03-2015, 09:35 PM	#13376
Spec Account Suspended Drives: 2010 Camaro 1SS LS3 Join Date: Jan 2015 Location: Riverside, CA Posts: 4,018	Bad Ass! Love the hood... been considering something like that.

04-03-2015, 10:08 PM	#13378
Spec Account Suspended Drives: 2010 Camaro 1SS LS3 Join Date: Jan 2015 Location: Riverside, CA Posts: 4,018	I think they'd be a nice touch. Trying to imagine mine with all that. Its why I haven't added my side rockers and my APR splitter yet... the CF Hood from Seibon is looking really good if I go CF side rockers, CF rear slats, and CF Spoiler. Thanks for the pics! We all sometimes don't truly realize how helpful they are.

04-04-2015, 10:50 AM	#13382
pyroguy Started#gottalovethatblue Drives: ABM #832 Join Date: Apr 2013 Location: TN Posts: 7,079 View My Garage	Technically not today anymore, but with Good Friday yesterday I didn't get the post in with church... I installed Solo Mach XL catback exhaust. LOVE it so far! A little quieter than I expected, but then again I don't have long tubes yet. __________________ '10 Camaro 2SS/RS \| Aqua Blue #832 of 3,903 \| Silver Stripes Check out my build thread

04-04-2015, 01:08 PM	#13383
Red2014SS Drives: 2014 2SS/RS Camaro Join Date: Dec 2014 Location: Kentucky Posts: 2,420	I added FR41 wheels in PVD Black Chrome... 10x11 setup with Toyo Proxies! I am very happy!!! Attached Images __________________ 2014 2SS/RS, L99, SW LTH w/HF Cats, GMPP Ex. Z/28 CAI, FR41s in PVD Black Chrome, Recaros, Pfadt Sway 377hp, 383tq 12.739@110.44 MPH

04-04-2015, 02:56 PM	#13384
MrIanB Drives: 2015 Red Rock Camaro 1LT RS Join Date: Feb 2015 Location: Cedar Park, Texas Posts: 428	Nothing, about to rain next two days, damn it. Ian B

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM