04-02-2015, 08:57 PM | #1 |
Drives: 2010 Silver SS/RS LS3 Join Date: Nov 2011
Location: Colorado Springs, CO
Posts: 882
|
Question about tuning back to stock
Question, what's the easiest/cheapest way to go back to a stock tune? I had my car dyno tuned back when I lived in Arkansas but I'm looking at trading it in, and if I decide to, I'd like to pull everything off and have it returned back to stock before turning it into a dealer.
I don't have a handheld tuner so I can't flash it back myself. What's the best option?
__________________
2010 Silver Ice Metallic Camaro SS/RS LS3
Mods...so far: resonator/muffler delete, tinted everything, '13 shift knob/boot, bowtie delete, PFADT sway bars, CAI intake, Hurst short shifter, JBA cat deletes, BMR trailing arms/outer bushings/steering rack bushing, Bo White ported TB. Rhino79 Dyno tuned...405 HP/399 TQ |
04-03-2015, 05:42 PM | #2 |
US Navy Vet
Drives: 2011 2LT/RS, 65 Mustang GT Fastback Join Date: Oct 2009
Location: Gilbert, AZ
Posts: 1,567
|
It depends on the tune that you have. If its IPF you need the IPF tuning module, or if it is Trifecta you need the Red cable and a laptop. Like I said it depends on the tune you have, and who it is from will determine what you need to return it back to stock.
__________________
2011 - 2LT/RS - RY, A6, Gray Interior - Team LLT:
3rd Camaro on this forum to have a Mylink installed. Installation by GEN5DIY, Heritage Grill, Lloyds Premium Ebony Camaro RS floor mats, Empire Billet Camaro Black sill plates, AAC: LED footwell & interior lighting, Rear Courtesy Lights, LED side markers/turn signals, Plasma P13W DRl bulbs, Formula 1 Pinnacle Series tint, Roto-Fab Yellow CAI & Fuse cover, Technostalgia Afterburner LED taillights, EmblemPros custom V6 hydrocoated carbon fiber/RY engine cover, Pfadt Sport sway bars, Ofer's Backup Camera, and full Brembo brake conversion. |
04-03-2015, 07:05 PM | #3 |
Drives: 2010 Silver SS/RS LS3 Join Date: Nov 2011
Location: Colorado Springs, CO
Posts: 882
|
It was dyno tuned by Ryan at GPI in Arkansas. I don't know exactly what program he used.
__________________
2010 Silver Ice Metallic Camaro SS/RS LS3
Mods...so far: resonator/muffler delete, tinted everything, '13 shift knob/boot, bowtie delete, PFADT sway bars, CAI intake, Hurst short shifter, JBA cat deletes, BMR trailing arms/outer bushings/steering rack bushing, Bo White ported TB. Rhino79 Dyno tuned...405 HP/399 TQ |
04-06-2015, 09:24 AM | #4 |
WHAT RED LIGHT?!
Drives: 2011 Black Camaro 2SS/RS M6 Join Date: Apr 2011
Location: Miami, Florida
Posts: 1,115
|
The easiest and cheapest way is to do nothing. Looking at your mods below, you basically have an aggressive stock-ish tune that will work with stock setup just the same. Also, if you are trading in, then you can let the dealer know and they can flash back to stock.
__________________
2011 2SS/RS M6 BLACK - VARARAM NO TUNE INTAKE, MODDED AND PORTED TB, PORTED INTAKE MANIFOLD, VITESSE THROTTLE CONTROLLER, DOUG THORLEY LT'S, CATLESS, X-PIPE, 25" STAINLESS WORKS RETRO CHAMBERED MUFFLERS, CUSTOM 2.5" MANDREL BENT EXHAUST, RICHMOND 4.10 GEARS, CUSTOM CAM (231/242 @ 114LSA), MUSTANG DYNO TUNED BY TORQ, 20% CERAMIC TINTS, EIBACH PROKIT SPRINGS 1" DROP, HAWK PERFORMANCE CERAMIC BRAKES, NITTO INVO TIRES, HYDROCARBON TAIL LIGHT AND FOG LIGHT BEZELS BY EMBLEMPROS, METRA DASH KIT, JVC KW-AV71BT, PHOENIX GOLD iAMP GM1, PASSPORT QI45 - 450 RWHP 415 RWTQ
|
04-06-2015, 01:21 PM | #5 |
Drives: 2010 Silver SS/RS LS3 Join Date: Nov 2011
Location: Colorado Springs, CO
Posts: 882
|
Yea that's a good point. Might not be trading it into a Chevy dealer so I don't know if they an flash it or I'll have to go to one nearby and just have them do it ahead of time.
__________________
2010 Silver Ice Metallic Camaro SS/RS LS3
Mods...so far: resonator/muffler delete, tinted everything, '13 shift knob/boot, bowtie delete, PFADT sway bars, CAI intake, Hurst short shifter, JBA cat deletes, BMR trailing arms/outer bushings/steering rack bushing, Bo White ported TB. Rhino79 Dyno tuned...405 HP/399 TQ |
|
|
|
|