Quad Exhaust Tips with Diffuser UPDATED PICS: COMPLETE

[MLAZ1990]

Originally Posted by newagemuscle

Ya, but like I said earlier. When you go to the website you can order the tips in whatever size inlet diameter you require for your exhaust. You are either going to have 2.5 inch or 3 inch which are both available sizes on their website.

What was the website you bought them on?

[newagemuscle]

Originally Posted by MLAZ1990

What was the website you bought them on?

http://tips.byethost4.com/dualindividual.html

[BLK1LE]

Looks Great! Nice Job.

[Powhusku]

Originally Posted by nyrfan

It's not going to be easy, in fact I doubt possible. There is very little pipe after the muffler and it's not centered with the NPP diffuser making it close to impossible for the needed bend. When I thought about doing it the couple of shops I visited would not attempt it.



Damn the underside of my tip looks dirty, lol


Sent from my AGM, 2SS/RS

I didn't think it was possible either when I first looked at it. But the shop thinks they can do it so we'll have to wait and see. If it doesn't work out, I'll just sell my corsa catback and buy their 3" ZL1 version.

[Iwantone2]

I can also vouch for the tips from SSClones. I got the dual 4" tips and they look really good! My muffler shop had to take off my Magnaflow mufflers to make everything fit just right, but I think it came out great!

The camera angle makes them look out of center:

[newagemuscle]

Originally Posted by Iwantone2

I can also vouch for the tips from SSClones. I got the dual 4" tips and they look really good! My muffler shop had to take off my Magnaflow mufflers to make everything fit just right, but I think it came out great!

The camera angle makes them look out of center:
Attachment 622453

Looking good

[2010 Camaro 2ss/rs]

Where can I get the diffuser? I think it looks great.

[Powhusku]

Originally Posted by Powhusku

I didn't think it was possible either when I first looked at it. But the shop thinks they can do it so we'll have to wait and see. If it doesn't work out, I'll just sell my corsa catback and buy their 3" ZL1 version.

Well the shop may have spoken a little early. I think what I'll need to do is sell my current corsa catback, and either buy their ZL1 version or buy a different one that has the dual tips. Either way I guess I have a sell my set of dual tips if we cant figure it out.

[Agent 409]

TO Powhusku and nyr fan : I have an L99 Corsa Sport catback system. From the looks of it today after removing my diffuser it seems near impossible to get the dual tips installed with the fact that the corsa muffler is so large and there is no room to move it backwards. Did either of you have any luck on this with the exhaust shops you spoke with?

[nyrfan]

Unfortunately you cannot put quad tips on a Corsa system.

Felix- speeding in my SS/RS

[Agent 409]

thanks for the info. I confirmed that notion with my exhaust shop as well. I am going to end up doing a Corsa/Borla hybrid system. I plan on doing a custom axle back setup with dual Borla XR-1's and the quad tips. I will leave the Corsa resonators up front in order to reduce some drone I may gain. Thats the plan for now.

Originally Posted by nyrfan

Unfortunately you cannot put quad tips on a Corsa system.

Felix- speeding in my SS/RS

[zissophiss]

How do you know if you need the 2.5" or 3.0" in?

[Homeless Man]

Hey I'm bout to do the same thing. Right now I have quad tips on a muffler delete with the 1LE diffuser. In a couple of days I will put on my JBA 3 inch Catback. I bought new quad tips. Do u think the shop will be able to put them on this without a problem? Also, how much did it cost for him to cut your old tips off and weld the new ones on?

[Homeless Man]

Here it looks like the JBA tips angle outward a little. I don't know if that will be a problem.