![]() |
|
|
#13595 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: SUMMIT WHITE 2SS/RS CAMARO Join Date: Feb 2008
Location: 2018: Lakewood Ranch, Fl.
Posts: 8,163
|
Detailed my engine compartment. Do it twice a year with Simple Green and a 1 1/2 inch paint brush. Still looks good after 5 1/2 years.
|
|
|
|
|
#13596 |
|
Account Suspended
Drives: 2010 Camaro 1SS LS3 Join Date: Jan 2015
Location: Riverside, CA
Posts: 4,018
|
|
|
|
|
|
#13597 |
![]() Drives: 2013 Crt 2ss/rs Join Date: May 2013
Location: Ridge,ny
Posts: 30
|
Installed a vitesse throttle controller :-)
__________________
First mod - Borla Atak
|
|
|
|
|
#13598 |
![]() Drives: 2013 Crt 2ss/rs Join Date: May 2013
Location: Ridge,ny
Posts: 30
|
__________________
First mod - Borla Atak
|
|
|
|
|
#13599 |
![]() Drives: 2011 SGM 1SS A6 & 2014 SW 2SS/RS M6 Join Date: Jul 2014
Location: Lighthouse Point, Fl
Posts: 490
|
|
|
|
|
|
#13600 |
![]() Drives: 72Camaro,92Camaro,10Camaro 2SS/RS Join Date: Mar 2015
Location: Northern Illinois
Posts: 33
|
Took the factory polished aluminum rims off and put on the painted gray ones from a 2014 Camaro. Only a 100% improvement.
|
|
|
|
|
#13601 |
![]() ![]() ![]() ![]() ![]() Drives: 2010 2LT/RS Black/IOM Join Date: Feb 2011
Location: Kentucky
Posts: 1,517
|
I beg you please don't make a thread about that controller. Jj. Sorta.
__________________
ZL1 Factory Reproduction Wheels, Airaid CAI, MRT V 2.0 Axle Back Installed by PIE Customs, Painted IOM Rally Stripes, Bowties by Danny Taylor Louisville KY, IOM Engine Cover and Fusebox Cover by River City Creations and Lighting San Antonio TX.
|
|
|
|
|
#13602 | |
![]() Drives: 2015 Camaro 1SS RS Join Date: Feb 2015
Location: South Florida
Posts: 300
|
Quote:
__________________
2015 Camaro 1SS/RS Blue Velvet Metallic, L99, Airaid Intake Tube, Akebono Ceramic Brake Pads, Borla S-Type Axle Back, GM Strut Tower Brace, Range Device
|
|
|
|
|
|
#13603 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 Camaro SS/RS Join Date: Mar 2014
Location: somewhere in MD
Posts: 4,883
|
New starter definitely helped with my horrible slow starting but now I'm trying to track down why the starter does not engage on the first attempt. Sometime it will start on the first try other times i just get a click from the relay and it doesnt engage. Thought it might be the wiring I put on to have my halos on with the running lights (add a fuse block seem to never work right). If it doesn't go away with that removed I'm going to get the battery load tested to see if it needs to be replaced due to age or a bad cell.
__________________
2010 2SS/RS
Z/28 intake, NW, FAST 102, speed engineering LT's, some exhaust, ATI -10% pulley, GM flex fuel injectors, DSX flex fuel sensor, MGW shifter, HP Tuners, some suspension work, stickers and a little weight loss. 12.63 @113.53 |
|
|
|
|
#13604 |
![]() ![]() ![]() ![]() ![]() Drives: 2010 2LT/RS Black/IOM Join Date: Feb 2011
Location: Kentucky
Posts: 1,517
|
Had it detailed. Ready for my buddy to take professional pics tomorrow.
__________________
ZL1 Factory Reproduction Wheels, Airaid CAI, MRT V 2.0 Axle Back Installed by PIE Customs, Painted IOM Rally Stripes, Bowties by Danny Taylor Louisville KY, IOM Engine Cover and Fusebox Cover by River City Creations and Lighting San Antonio TX.
|
|
|
|
|
#13605 |
|
INFECTED
Drives: 2011 1LT Synergy Green Join Date: May 2011
Location: Upstate PA
Posts: 3,226
|
Sitting here waiting on Fed Ex to drop off my new rear seat covers so I can install them , Old one already off ..
__________________
|
|
|
|
|
#13606 | |
![]() ![]() ![]() ![]() ![]() Drives: 2010 2LT/RS Black/IOM Join Date: Feb 2011
Location: Kentucky
Posts: 1,517
|
Quote:
__________________
ZL1 Factory Reproduction Wheels, Airaid CAI, MRT V 2.0 Axle Back Installed by PIE Customs, Painted IOM Rally Stripes, Bowties by Danny Taylor Louisville KY, IOM Engine Cover and Fusebox Cover by River City Creations and Lighting San Antonio TX.
|
|
|
|
|
|
#13607 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2021 ZL1 1LE Satin Steel Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,359
|
Got my oil analysis
![]() Ryan
__________________
Ryan
2021 ZL1 1LE Satin Steel Metallic Build Page: https://www.camaro6.com/forums/showthread.php?t=632481 |
|
|
|
|
#13608 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: SUMMIT WHITE 2SS/RS CAMARO Join Date: Feb 2008
Location: 2018: Lakewood Ranch, Fl.
Posts: 8,163
|
Looks good but tomorrow ! It's black, It will not be clean tomorrow.
__________________
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| GM memo to dealers | Moose | 5th Gen Camaro SS LS LT General Discussions | 41 | 02-04-2010 08:33 PM |
| Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS | Info@PeddersUSA.com | USA - Texas | 39 | 02-01-2010 01:48 PM |
| Answeres to questions I have stumbled on | dieseldave24v | 5th Gen Camaro SS LS LT General Discussions | 13 | 02-23-2009 07:56 PM |