04-21-2015, 02:50 PM | #57 |
Drives: ZL1 1LE A10 Join Date: Mar 2015
Location: CA
Posts: 1,093
|
Done with the gauge bezel and air vents bezels. Now I just have to do the center air vent, but I have to wait for more vinyl wrap.
The picture of the air vent doesn't do it justice, it appears as though there's some imperfections but it actually looks nice in person. :/
__________________
Current: 2019 ZL1 1LE A10 Mods: MPS4s Tires | Borla Atak | CF Steering Wheel Previous: 2018 ZL1 1LE M6 | 2017 Z06 Z07 M7 | 2017 GS A8 | 2015 ZL1 M6 | 2013 GT500 |
04-21-2015, 04:11 PM | #58 |
C'mon- really?
Drives: Looking for a ZL1 Join Date: Aug 2009
Location: Nortwestern Ohio
Posts: 1,966
|
That looks sick. Should come like that from the factory.
Nice job!
__________________
Steve
2018 Camaro 2SS 1LE Black #3805 - SOLD |
04-21-2015, 04:37 PM | #59 | |
Drives: ZL1 1LE A10 Join Date: Mar 2015
Location: CA
Posts: 1,093
|
Quote:
I'll take more pics once I finish the center air vent. I ordered more vinyl wrap but it wont arrive for a few days.
__________________
Current: 2019 ZL1 1LE A10 Mods: MPS4s Tires | Borla Atak | CF Steering Wheel Previous: 2018 ZL1 1LE M6 | 2017 Z06 Z07 M7 | 2017 GS A8 | 2015 ZL1 M6 | 2013 GT500 |
|
04-21-2015, 04:56 PM | #60 |
Drives: 2015 ZL1 Join Date: Mar 2015
Location: SF East Bay Area
Posts: 129
|
Can you provide a link to the vinyl wrap you're using?
Thanks. |
04-21-2015, 05:14 PM | #61 | |
Drives: ZL1 1LE A10 Join Date: Mar 2015
Location: CA
Posts: 1,093
|
Quote:
It holds up well, very sturdy -- much much more durable than plastidip if you can wrap it.
__________________
Current: 2019 ZL1 1LE A10 Mods: MPS4s Tires | Borla Atak | CF Steering Wheel Previous: 2018 ZL1 1LE M6 | 2017 Z06 Z07 M7 | 2017 GS A8 | 2015 ZL1 M6 | 2013 GT500 |
|
04-21-2015, 06:04 PM | #62 |
Drives: Camaroless until October Join Date: Jul 2013
Location: Private
Posts: 19
|
How much of the vinyl wrap do you need to do all the solver parts inside? Looks awesome!
|
04-21-2015, 10:44 PM | #63 | |
Drives: ZL1 1LE A10 Join Date: Mar 2015
Location: CA
Posts: 1,093
|
Quote:
About the same for the gauge bezel. About 4" square for the air vents. The center air vent (which I haven't done yet) is probably 24" x 5". You always want some excess to use for grabbing and stretching when working it over curved surfaces. I'd recommend the 5' x 2' roll so that you can cover a 2' area if needed. But you can probably get away with a 5' x 1' roll. I didn't do the center console yet so I don't know but a 5' x 2' roll should cover everything.
__________________
Current: 2019 ZL1 1LE A10 Mods: MPS4s Tires | Borla Atak | CF Steering Wheel Previous: 2018 ZL1 1LE M6 | 2017 Z06 Z07 M7 | 2017 GS A8 | 2015 ZL1 M6 | 2013 GT500 |
|
04-22-2015, 11:54 AM | #64 |
Drives: 2014 ZL1 Join Date: Dec 2013
Location: PA
Posts: 151
|
Painted over the gold on the bowtie - Red Rock
|
04-22-2015, 01:04 PM | #65 |
Drives: ZL1 1LE A10 Join Date: Mar 2015
Location: CA
Posts: 1,093
|
I'm not into the red bowtie, but I LOVE the hint of red trim on the gauge bezel. I wish I had done that while I had mine off.
I'd like the chrome around the bowtie to be red and then the gold center to be black, that'd be cool
__________________
Current: 2019 ZL1 1LE A10 Mods: MPS4s Tires | Borla Atak | CF Steering Wheel Previous: 2018 ZL1 1LE M6 | 2017 Z06 Z07 M7 | 2017 GS A8 | 2015 ZL1 M6 | 2013 GT500 |
04-22-2015, 05:27 PM | #66 |
Drives: 2017 ZL1 Garnet Red Join Date: Feb 2015
Location: NW Wa
Posts: 354
|
Hi Angrybits,
The steering wheel looks great. How much can you stretch the wrap before it tears. I would like to try and see what I can do. I also have a heat gun. |
04-22-2015, 05:29 PM | #67 |
Drives: 2017 ZL1 Garnet Red Join Date: Feb 2015
Location: NW Wa
Posts: 354
|
Hi ZL1-PA,
Your dash parts also look great. I want to get rid of the silver trim also. What gauges did you put on top of your dash? Thanks, Sam. |
04-22-2015, 07:49 PM | #68 |
Drives: 2014 ZL1 Join Date: Dec 2013
Location: PA
Posts: 151
|
The gauge holder is from Baron Concepts.
Excellent choice. http://www.baronconcepts.com You can also find them on Facebook. The gauges are GlowShift - they rattle like crazy unless you put dental bands between the knobs and they do not back up their product. |
04-22-2015, 07:55 PM | #69 | |
Drives: ZL1 1LE A10 Join Date: Mar 2015
Location: CA
Posts: 1,093
|
Quote:
I'd say a 1/4 inch of material can easily stretch to an inch or more. The problem is when you use your fingers to work it in, watch your finger nails, then can cut through the material pretty easily when its warm or if theres a lot of friction from moving your nail along an edge a lot of times.
__________________
Current: 2019 ZL1 1LE A10 Mods: MPS4s Tires | Borla Atak | CF Steering Wheel Previous: 2018 ZL1 1LE M6 | 2017 Z06 Z07 M7 | 2017 GS A8 | 2015 ZL1 M6 | 2013 GT500 |
|
|
|
|
|