![]() |
|
|
#1 |
![]() |
Strange problem maybe related to drive by wire
So under a constant throttle position lets say 15% while accelerating slightly through 1st then 2nd gear the power is changing like I am pushing the pedal down more then lifting and repeating. Like its pushing me back in the seat a little then it stops then its pushing me back again. All with a constant throttle position. Is this the newer style drive by wire I guess it's called vs. the old throttle cable issue ? I would like to get any issues taken care of before I ruin my warranty by modding the car. It currently has 750 miles on it. The problem doesn't seem to be as noticeable once the car warms up.
Thanks p.s. I do have the vitesse throttle controller but I have not installed it yet. I'm sure if I did the dealer would blame it on that. |
|
|
|
|
|
#2 |
|
Drives: 2010 Chevy Camaro 2LT / RS / Auto Join Date: Jan 2010
Location: Rutherford, NJ
Posts: 905
|
Yes, like you said, don't install the Vitesse Controller until you get your issue resolved. Sounds like a faulty Throttle Position sensor or the accelerator pedal Sensor going bad.
|
|
|
|
|
|
#3 |
![]() |
|
|
|
|
|
|
|
|
![]() |
|
|