2010 Camaro switchplate is done! Emblempros.com delivers another... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

dragonZ28 · 08-22-2009, 08:54 PM

Here is our new switchplate made from acrylic. It deletes the rear cupholder for the switches, but retains the front cupholder. It nicely fills the entire cupholder area while wrapping around the top cupholder. These are available with up to 5 switches.

We will custom label every switch for you as well as custom color the labels to your liking. Here is one with orange labels in a 5 switch setup:

As a side note, these will soon be available in a brushed stainless finish.

Here is the link, they're available right now:
http://www.emblempros.com/inc/sdetail/2842

buddylok · 08-22-2009, 09:05 PM

I hope somebody will do something like this, to replace the cup holders with a armrest. don't mind giving up the cup holders.

great looking switch plate by the way. nice job!

tjd24 · 08-23-2009, 12:12 AM

Looks great - I'd like to see a version where there is an iPhone holder where the switches are and leaves the front cup holder - any interest in making that?

If it could raise the iPhone up and swivel to angle to driver view taste that would be great.

DocHolliday · 08-23-2009, 12:22 AM

At the risk of sounding like a complete jack ass...what would the switches be used for?

dragonZ28 · 08-23-2009, 09:20 AM

Quote:

Originally Posted by DocHolliday

At the risk of sounding like a complete jack ass...what would the switches be used for?

We have been making switchplates for ther vehicles for quite sometime now, this idea is not new. Just new to this car.
Some use these for the NOS systems, exhaust cutout switches, fog lights, electrical accessories added to the car, interior lighting, exterior lighting, etc...
We sell switchplates quite often, and they come in handy for having all of your switching controls in one place, without having to drill and cut holes all over your dash board. Also with this method, all of your switches will match, and be the same color.

Thanks, Roger

DocHolliday · 08-24-2009, 10:45 PM

Quote:

Originally Posted by dragonZ28

We have been making switchplates for ther vehicles for quite sometime now, this idea is not new. Just new to this car.
Some use these for the NOS systems, exhaust cutout switches, fog lights, electrical accessories added to the car, interior lighting, exterior lighting, etc...
We sell switchplates quite often, and they come in handy for having all of your switching controls in one place, without having to drill and cut holes all over your dash board. Also with this method, all of your switches will match, and be the same color.

Thanks, Roger

Thanks...makes sense now. Any word on the emblem that goes next to the key?

camero · 08-24-2009, 11:17 PM

I'd sure like a padded cover to turn those useless cup holders into twin secret storage compartments with comfortable armrest. Have you considered making something like that? Or has anyone heard of one available?

dragonZ28 · 08-24-2009, 11:34 PM

Quote:

Originally Posted by DocHolliday

Thanks...makes sense now. Any word on the emblem that goes next to the key?

Very soon, just do not know an exact date.

dragonZ28 · 08-24-2009, 11:35 PM

Quote:

Originally Posted by camero

I'd sure like a padded cover to turn those useless cup holders into twin secret storage compartments with comfortable armrest. Have you considered making something like that? Or has anyone heard of one available?

We do not make them. I have not heard of it either.

REVOLUTIONSS · 08-24-2009, 11:56 PM

these are awesome roger , can the buttons be customized ? emails sent

dragonZ28 · 08-25-2009, 12:53 AM

Quote:

Originally Posted by REVOLUTIONSS

these are awesome roger , can the buttons be customized ? emails sent

Yes sir,

Looking forward to working with you.

Thanks, Roger

KJS · 08-26-2009, 10:40 PM

Quote:

Originally Posted by camero

I'd sure like a padded cover to turn those useless cup holders into twin secret storage compartments with comfortable armrest. Have you considered making something like that? Or has anyone heard of one available?

I've been thinking the same thing. If anyone knows or hears of something, I'd be interested.

dragonZ28 · 08-28-2009, 11:58 PM

We have these switch plates made out of brushed stainless now.
Will post pictures in a few days.

Jferrell88 · 08-29-2009, 12:03 AM

not sure what i'd use it for but looks great

08-22-2009, 08:54 PM	#1
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 2,426	2010 Camaro switchplate is done! Emblempros.com delivers another... Here is our new switchplate made from acrylic. It deletes the rear cupholder for the switches, but retains the front cupholder. It nicely fills the entire cupholder area while wrapping around the top cupholder. These are available with up to 5 switches. We will custom label every switch for you as well as custom color the labels to your liking. Here is one with orange labels in a 5 switch setup: As a side note, these will soon be available in a brushed stainless finish. Here is the link, they're available right now: http://www.emblempros.com/inc/sdetail/2842

08-23-2009, 12:12 AM	#3
tjd24 Thank you Oshawa/St.Cats! Drives: was 2010 2LT RS 2G1FC1EV4A9103434 Join Date: May 2009 Location: NW NJ Posts: 3,481 View My Garage	Looks great - I'd like to see a version where there is an iPhone holder where the switches are and leaves the front cup holder - any interest in making that? If it could raise the iPhone up and swivel to angle to driver view taste that would be great. __________________ #3434 Born 4-15-2009, Delivered 5-22-2009 BBOMG 2/3/4 - Traded-in 8/31/2019:

08-24-2009, 11:17 PM	#7
camero Drives: IOM V6 RS 38808 Join Date: Jan 2007 Location: S.Detroit, Ontario Posts: 776	I'd sure like a padded cover to turn those useless cup holders into twin secret storage compartments with comfortable armrest. Have you considered making something like that? Or has anyone heard of one available? __________________ I've known how to spell Camaro since before you were born.

08-24-2009, 11:56 PM	#10
REVOLUTIONSS Drives: triple black Super sport Join Date: Aug 2009 Location: michigan Posts: 311	these are awesome roger , can the buttons be customized ? emails sent __________________ [SIGPIC][/SIGPIC]

08-29-2009, 12:03 AM	#14
Jferrell88 Drives: black 2ss/rs Join Date: Oct 2008 Location: Proctorville, OH Posts: 751 View My Garage	not sure what i'd use it for but looks great __________________

08-22-2009, 09:05 PM	#2
buddylok Drives: - Join Date: Jun 2009 Location: - Posts: 458 View My Garage	I hope somebody will do something like this, to replace the cup holders with a armrest. don't mind giving up the cup holders. great looking switch plate by the way. nice job!

08-23-2009, 12:22 AM	#4
DocHolliday Drives: '14 Blade Silver Z51 Join Date: Jun 2009 Location: Northern Virginia Posts: 558	At the risk of sounding like a complete jack ass...what would the switches be used for?

08-28-2009, 11:58 PM	#13
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 2,426	We have these switch plates made out of brushed stainless now. Will post pictures in a few days.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs!	RPI Designs	Cosmetics and Lighting Modification Discussions	36	04-02-2020 06:32 PM
SEMA Camaro: Yellow Camaro Concept	Tran	Camaro Photos \| Spyshots \| Video \| Media Gallery	45	09-01-2011 03:19 PM
Ambient lighting (ABL) - the FINAL update = LIMITED TO DOOR PANELS	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	338	04-15-2009 06:33 PM
2010 Stang vs Camaro (seems unbiased)	MerF	5th Gen Camaro SS LS LT General Discussions	17	02-09-2009 11:11 AM
UPCOMING CAMARO IMPORTANT DATES	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	125	01-11-2009 01:31 AM