need some advice - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

inferno2ls · 04-07-2015, 12:45 PM

Okay so I'm gonna be installing a full BMR suspension set up with sway bars, end link, trailing arms etc. And 1le shocks and struts with eibach 1" lowering springs. I was going to install all this with a buddy of mine and leave all the bushings to the shop that does the alignment. Is there any problems anyone can think of that could happen? Or have any tips to make installing easier?
I have a 2013 v6 2ls

J-Crazy Camaro · 05-08-2015, 12:57 PM

well there can always be user error if you install it yourself, at least if the shop installs it they are liable. they are all good products you are installing though so good luck

Jenner · 05-08-2015, 09:37 PM

My advice would be to do one side at a time so if you can't remember how something goes you can always look on the other side. Or take pictures. I was scared to do the brembos on my car and it was actually pretty easy.

hrpiii · 05-11-2015, 07:46 AM

wait a second, you are installing all the parts are not the bushings. Might as well let the shop do it all, because they will have to take it all apart to install the bushings. not sure what you are gaining here unless it's just knowledge on how it all goes together.

04-07-2015, 12:45 PM	#1
inferno2ls Drives: 2013 camaro 2ls Join Date: Mar 2014 Location: SEPA PA Posts: 151	need some advice Okay so I'm gonna be installing a full BMR suspension set up with sway bars, end link, trailing arms etc. And 1le shocks and struts with eibach 1" lowering springs. I was going to install all this with a buddy of mine and leave all the bushings to the shop that does the alignment. Is there any problems anyone can think of that could happen? Or have any tips to make installing easier? I have a 2013 v6 2ls __________________ Injen col air intake, vmax ptb, solo high flow cats, bbk aluminized xpipe, mrtv2, Rx catch can, BMR strut tower brace.

05-08-2015, 12:57 PM	#2
J-Crazy Camaro Drives: Red V8 Join Date: Jul 2014 Location: Georgia Posts: 325	well there can always be user error if you install it yourself, at least if the shop installs it they are liable. they are all good products you are installing though so good luck __________________ Live Hard, Drive Fast, Die Free. 'Merica

05-08-2015, 09:37 PM	#3
Jenner Drives: 2012 SS/RS Join Date: Jul 2013 Location: Placentia, CA Posts: 2,130	My advice would be to do one side at a time so if you can't remember how something goes you can always look on the other side. Or take pictures. I was scared to do the brembos on my car and it was actually pretty easy.

05-11-2015, 07:46 AM	#4
hrpiii AKA "Beefcake" Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009 Location: Indy Posts: 8,572	wait a second, you are installing all the parts are not the bushings. Might as well let the shop do it all, because they will have to take it all apart to install the bushings. not sure what you are gaining here unless it's just knowledge on how it all goes together.