Need HELP!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

wingman4895 · 06-09-2015, 07:39 PM

So I recently bought and installed Baer Cross Drilled and Slotted Rotors along with EBC Red Stuff Brake pads for my 14 Camaro. For the most part, the installation went smoothly but now when I drive, my left rear rotor makes a scraping sound and for the life of me, I can not figure it out. Any one have any ideas?

White_SS/RS · 06-09-2015, 08:39 PM

Could be a pad that's bound up a little. Make sure they move freely in the caliper. Or it could be the pad retention pin spring. Take the pads out, check for anything noticeable and reinstall.

wingman4895 · 06-10-2015, 07:25 AM

I have taken every part of the brake system out of the equation. I've narrowed down to just the rotor. When the rotor os on the studs, it's rubbing on something. It's not the back plate. That's the first thing I checked.

06-09-2015, 07:39 PM	#1
wingman4895 Drives: Silver 2014 2LT Canaro Join Date: May 2015 Location: United States Posts: 6	Need HELP!! So I recently bought and installed Baer Cross Drilled and Slotted Rotors along with EBC Red Stuff Brake pads for my 14 Camaro. For the most part, the installation went smoothly but now when I drive, my left rear rotor makes a scraping sound and for the life of me, I can not figure it out. Any one have any ideas?

06-09-2015, 08:39 PM	#2
White_SS/RS Drives: 14 1LE Join Date: Mar 2013 Location: Spokane, WA Posts: 1,567	Could be a pad that's bound up a little. Make sure they move freely in the caliper. Or it could be the pad retention pin spring. Take the pads out, check for anything noticeable and reinstall. __________________ LMS Engineering

06-10-2015, 07:25 AM	#3
wingman4895 Drives: Silver 2014 2LT Canaro Join Date: May 2015 Location: United States Posts: 6	I have taken every part of the brake system out of the equation. I've narrowed down to just the rotor. When the rotor os on the studs, it's rubbing on something. It's not the back plate. That's the first thing I checked.