>>> NEW NICHE APEX | NICHE GT5 20X8.5, 20X10, 20X10.5 STARTING @ $1176 SHIPPED!

[BestWheelDeals]

Originally Posted by BamaRocker

ANYONE with Stock height photos...I want to order the Niche Apex machined for my 2012 45th but i want to keep stock height,,,Most if not all the pictures here show dropped cars...


ANYONE, if you have photos please share,....Thanks

Car below is not lowered.

[BamaRocker]

Originally Posted by BronxxBombers213

honestly with an offset that aggressive, youll want to drop the car.. it will look like a 4x4 IMO, and will call attention to all that wheel gap

what i recommended to another member is to go with a 20x10 +40 setup if youre set on stock height.. yea the wheels will be tucked more than the 10.5's, but still more aggressive than stock offsets and you still get the nice concave face all around... the good thing is that this way you wouldnt see as much of the top of the tire as you would with the 10.5's since they arent as close to the fender

I am keeping stock height, and was thinking about 20X10 up front with 20X10.5 in rear. running 275/305 would this look and ride ok.

Torn between Mickey Thompson Comp and AZENIS FK453 for tire option, not sure which ones to run with...I am about to order just like to see more pictures running this kind of set up first and more feed back...

I have 2012 45th Anniversary camaro this will be going on...Thanks everyone.

[BamaRocker]

well i found some numbers and it looks like the 275/40 and 315/35 run very close to the same heights, so i quess i am down to which tires...

may go 10.5 all around like everyone else...

So tires..

1. Mickey Thompson

1. falken azenis fk453

[NeedSpeed]

Would love to see this set Up. I woUld like to see if the 20x10.5 with the 315/35/20 sits flush with the rear fender at the Top of just inside on a stock ride height??

Originally Posted by BamaRocker

well i found some numbers and it looks like the 275/40 and 315/35 run very close to the same heights, so i quess i am down to which tires...

may go 10.5 all around like everyone else...

So tires..

1. Mickey Thompson

1. falken azenis fk453

[BamaRocker]

WHEELS ON ORDER....

ended up 275/305 10.5 all 4 corners...305's mickey thompson does not come in 315.

SO I would like to start a quick poll....

1. Who has cutt skates, maybe picture showing what yous looks like cutt.
2. Who went with pads, what you go with and how are the pads working out.


Thanks...

[BamaRocker]

Here it is...

[BestWheelDeals]

Originally Posted by BamaRocker

Here it is...

Really clean and aggressive look. Love it.

Thanks for posting pic.

[BestWheelDeals]

New from Niche:

Invert M162


Invert M163

[will75]

Originally Posted by BestWheelDeals

Thank you as well... Love it!

Hi. I think these are the niche apex. Would you tell me what the sizes and offsets are? I want 20" but want that same stance. I am currently running 275/40-20 on front and 315/35-20 on rear. I have a 2010 ss. Also would all niche in the same offset look the same, milan, apex, lemans, etc? Thank you

[BestWheelDeals]

Originally Posted by will75

Hi. I think these are the niche apex. Would you tell me what the sizes and offsets are? I want 20" but want that same stance. I am currently running 275/40-20 on front and 315/35-20 on rear. I have a 2010 ss. Also would all niche in the same offset look the same, milan, apex, lemans, etc? Thank you

PM sent.

[1sikss]

whats the difference between deep concave and maxi concave.. i want something concave in front and more concave in the rear

[1sikss]

Originally Posted by BestWheelDeals

Lets appease it a bit... Here they are; started moving your way couple os days ago.

What concave set up is this?

[BestWheelDeals]

Originally Posted by 1sikss

What concave set up is this?

PM sent. Thanks

[BestWheelDeals]

Special deal on all Niche wheels.