What Did You Do To Your Camaro Today? - Page 1023 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

custommx3 · 07-17-2015, 11:37 PM

Installed a Cold Air Inductions CAI and put on a MRT v2 axle back exhaust on.

Gave it a bath too.

Spec · 07-17-2015, 11:55 PM

This is going on the Hurst tomorrow - M1 Abrams Stainless. Was too dang hot to install today...

Beautifully constructed... nice and heavy at just shy under a pound! Game changer...

Hetfield03 · 07-18-2015, 12:11 AM

Quote:

Originally Posted by custommx3

Installed a Cold Air Inductions CAI and put on a MRT v2 axle back exhaust on.

Gave it a bath too.

Thats the exact setup I should have gone with had I not got an airaid. I like it, but its not as clean looking. Love the mrt v2.

Hetfield03 · 07-18-2015, 12:12 AM

Washed my car too, only to be stormed on.

Black&WhiteEnvy · 07-18-2015, 12:49 PM

Did I do that?!?

Tricksta · 07-18-2015, 01:08 PM

Quote:

Originally Posted by Black&WhiteEnvy

Did I do that?!?

no good until that speedometer reads higher than 155.

Caseyls3 · 07-18-2015, 01:51 PM

Gave her a bath - installed some ZL1 additions rock guards...

This car is so many different colors depending on the light - still getting used to the color (s)

Sent from my iPhone using Tapatalk

REDHOTRED2015 · 07-18-2015, 02:39 PM

Had to get a winter beater!

Sandman1969 · 07-18-2015, 03:07 PM

Added a CAI to her.

Black&WhiteEnvy · 07-18-2015, 04:07 PM

Quote:

Originally Posted by Tricksta

no good until that speedometer reads higher than 155.

Only a stock v6 on a side road... 115 limit

out!!!

custommx3 · 07-18-2015, 04:19 PM

Had my MRT v2 welded on today. Had the car aligned, wheels balanced, and a nail patched.

Caseyls3 · 07-18-2015, 08:18 PM

Put the plates on as well:

Sent from my iPhone using Tapatalk

Caseyls3 · 07-18-2015, 08:34 PM

Wow let's try that again

Sent from my iPhone using Tapatalk

oldfriend · 07-18-2015, 08:39 PM

Quote:

Originally Posted by custommx3

Had my MRT v2 welded on today. Had the car aligned, wheels balanced, and a nail patched.

Why one would go to the trouble to patch a nail ?

07-17-2015, 11:37 PM	#14309
custommx3 Drives: 2017 2SS, 2023 3LT RS, 2011 2LT RS Join Date: Aug 2014 Location: Memphis Posts: 366 View My Garage	Installed a Cold Air Inductions CAI and put on a MRT v2 axle back exhaust on. Gave it a bath too. Attached Images

07-17-2015, 11:55 PM	#14310
Spec Account Suspended Drives: 2010 Camaro 1SS LS3 Join Date: Jan 2015 Location: Riverside, CA Posts: 4,018	This is going on the Hurst tomorrow - M1 Abrams Stainless. Was too dang hot to install today... Beautifully constructed... nice and heavy at just shy under a pound! Game changer... Attached Images

07-18-2015, 12:12 AM	#14312
Hetfield03 Drives: 2010 2LT/RS Black/IOM Join Date: Feb 2011 Location: Kentucky Posts: 1,517	Washed my car too, only to be stormed on. __________________ ZL1 Factory Reproduction Wheels, Airaid CAI, MRT V 2.0 Axle Back Installed by PIE Customs, Painted IOM Rally Stripes, Bowties by Danny Taylor Louisville KY, IOM Engine Cover and Fusebox Cover by River City Creations and Lighting San Antonio TX.

07-18-2015, 12:49 PM	#14313
Black&WhiteEnvy 211 v6 m6 Drives: 2011 v6 manual white with black Join Date: Mar 2015 Location: Detroit Posts: 89	Did I do that?!? Attached Images

07-18-2015, 01:51 PM	#14315
Caseyls3 Drives: 2011 Camaro SS/RS Convertible Join Date: Jun 2015 Location: Columbus Posts: 444	Gave her a bath - installed some ZL1 additions rock guards... This car is so many different colors depending on the light - still getting used to the color (s) Sent from my iPhone using Tapatalk __________________ 2011 Camaro SS/RS Vert - Jewel Red Tintcoat, 6M, 231/247 Comp Cam, Kooks headers, Borla ATAK, ATI under drive pulley, Richmond 4.10s, LS9 clutch, Hurst shifter, BMR Springs

07-18-2015, 02:39 PM	#14316
REDHOTRED2015 Drives: 2015 2LTRS Join Date: Mar 2015 Location: Ontario Canada Posts: 78 View My Garage	Got her a baby sister! Had to get a winter beater! Attached Images

07-18-2015, 03:07 PM	#14317
Sandman1969 Drives: 2015 2SS Red Hot Adrenaline Join Date: Apr 2014 Location: Virginia Posts: 456 View My Garage	Added a CAI to her. __________________ 2015 2SS Red Hot Adrenaline

07-18-2015, 04:19 PM	#14319
custommx3 Drives: 2017 2SS, 2023 3LT RS, 2011 2LT RS Join Date: Aug 2014 Location: Memphis Posts: 366 View My Garage	Had my MRT v2 welded on today. Had the car aligned, wheels balanced, and a nail patched.

07-18-2015, 08:18 PM	#14320
Caseyls3 Drives: 2011 Camaro SS/RS Convertible Join Date: Jun 2015 Location: Columbus Posts: 444	Put the plates on as well: Sent from my iPhone using Tapatalk __________________ 2011 Camaro SS/RS Vert - Jewel Red Tintcoat, 6M, 231/247 Comp Cam, Kooks headers, Borla ATAK, ATI under drive pulley, Richmond 4.10s, LS9 clutch, Hurst shifter, BMR Springs

07-18-2015, 08:34 PM	#14321
Caseyls3 Drives: 2011 Camaro SS/RS Convertible Join Date: Jun 2015 Location: Columbus Posts: 444	Wow let's try that again Sent from my iPhone using Tapatalk __________________ 2011 Camaro SS/RS Vert - Jewel Red Tintcoat, 6M, 231/247 Comp Cam, Kooks headers, Borla ATAK, ATI under drive pulley, Richmond 4.10s, LS9 clutch, Hurst shifter, BMR Springs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM