![]() |
|
|
#1 |
![]() Drives: Dusk SE Join Date: Jun 2014
Location: Apopka Fl.
Posts: 456
|
optional spare
I had seen in the past a post that said there was a website that offered a spare that would clear the brembo breaks but I am unable to find it can someone please help as I want to take the inflator kit out and replace it with a full size tire.
|
|
|
|
|
|
#2 |
![]() Drives: Dusk SE Join Date: Jun 2014
Location: Apopka Fl.
Posts: 456
|
Bump 95 views and no one is carrying a spare that will clear the brembos? Where are you guys that got rid of the inflator kit?
|
|
|
|
|
|
#3 |
|
My Dream Car
Drives: 2011 SIM LS3 1SS Join Date: Jul 2009
Location: staten island
Posts: 1,534
|
Performance spare.com, they sell a donut tire, spacer and jack
__________________
CAI intake/ADM Scoop/Stainless Power Headers/Dynatech cat back exhaust/Vitesse Throttle Control/ Ported Throttle Body/QTP Electric Cutouts/ 3.91 gears and janetty rear posi/ Tuned by Janetty racing
|
|
|
|
|
|
#4 |
![]() Drives: 2015 Camaro L99-1SS/RS CRM Join Date: Jun 2015
Location: New Jersey / Texas
Posts: 323
|
Their spare fits over the Brembo brakes, front and rear? I am also looking for the same thing for my SS
__________________
2015 Crystal Red RS V6....14.52 @ 95.34 CAI cold air package, 642 mile on odo..Best ET 14.41 @ 97.12....sold 7/29/15
2015 Crystal Red 1SS/RS..A6..11.31 @ 119.76...4065 lbs...Ebay cold air kit, Pat G tune, MT drag radials, TSP 1 7/8" headers w/cats Circle D converter sold 2010 Victory Red V6 - Auto |
|
|
|
|
|
#5 |
|
INTSAGRAM: Failwish
Drives: 2019 /2SS LT1 Join Date: Jun 2015
Location: Tx
Posts: 232
|
its well worth the piece of mind, i bought one from that same company.the first week i had my car, it comes with a aluminium spacer,that allows the 18 to mount over the brembo assembly comes with a cheap scissor jack, and a lug bar/wrench with 2 sockets that have sizes for the factory lugs the spacer lugsthe spacer has all the hardware. and is kinda tight running 0 gauge amp and ground wires from batt but doable.
|
|
|
|
|
|
#6 | |
|
My Dream Car
Drives: 2011 SIM LS3 1SS Join Date: Jul 2009
Location: staten island
Posts: 1,534
|
Quote:
Yep, both front and rear as already mentioned an inflator kit is no piece of mind, only thing that sucks is if you get a flat on the rear, you need to remove front tire and put spare on the front and the front tire goes on the rear, if I recall the size of the donut is small and can hurt the rear differential or lsd, some one will correct me if I am wrong, it's not perfect but at least you can get to where you are going, an inflator kit isn't going to work with a cut or slash in the tire
__________________
CAI intake/ADM Scoop/Stainless Power Headers/Dynatech cat back exhaust/Vitesse Throttle Control/ Ported Throttle Body/QTP Electric Cutouts/ 3.91 gears and janetty rear posi/ Tuned by Janetty racing
|
|
|
|
|
|
|
|
|
![]() |
|
|