![]() |
|
|
#1 |
![]() Drives: 2014 Camaro 1SS Join Date: Nov 2014
Location: Michigan
Posts: 525
|
A Bike Rack That Fits!
I know a few people have asked about bike racks that fit the Camaro in the past, and it took me forever to find one that fits, so I thought I would share.
Hollywood F2 It took a little bit of adjusting to make sure nothing was rubbing, but it fits on my trunk over my spoiler and can carry two bikes without any danger of rubbing on the trunk. ![]() It's extremely easy to put on and take off and fits nicely in the trunk for storage. |
|
|
|
|
|
#2 |
|
Account Suspended
Drives: black and silver Join Date: Apr 2014
Location: new york
Posts: 1,728
|
good god.........
|
|
|
|
|
|
#3 |
![]() ![]() ![]() Drives: 2013 Blue Ray 1LS M6 Join Date: Apr 2013
Location: Pittsburgh, PA
Posts: 1,227
|
Except that it rests on the trunk, which is a rub point.
Get a hitch for the thing and use a hitch-mount rack, then it can't rub at all. The hitches are cheap and can be put on and off with only 3 bolts. Piece-o-cake!
__________________
Performance Mods
Elite Catch Can | CAI Intake with Scoop & Washer Bottle Relocation | MRT v2 Axle-Back Exhaust | MagnaFlow Resonated X-Pipe | Resonator Delete | Vmax Ported Throttle Body | GM Strut Tower Brace | JDP Tow Hook | Vitesse Throttle Controller Aesthetic Mods Chrome Peek-A-Boo Door Handles | Interior Accessories Kit | OEM RS HIDs w/ 6000k Bulbs & 5000k LED Fogs | Tail Light, Marker Light, & Turn Signal Tint | Tru-Sequence Sequential Turn Signals & Brake Lights | Silver Fade Gill Stripes | Carbon Fiber Bowties | Various Chrome/Painted/Carbon Fiber Items |
|
|
|
|
|
#4 | |
![]() Drives: 2014 Camaro 1SS Join Date: Nov 2014
Location: Michigan
Posts: 525
|
Quote:
And I didn't ask anyone for negative feedback, I just put this here for FYI. It works for me, it might work for someone else. And let's remember, it's just a Camaro, not a Lamborghini. |
|
|
|
|
|
|
#5 | |
![]() ![]() ![]() Drives: 2013 Blue Ray 1LS M6 Join Date: Apr 2013
Location: Pittsburgh, PA
Posts: 1,227
|
Quote:
__________________
Performance Mods
Elite Catch Can | CAI Intake with Scoop & Washer Bottle Relocation | MRT v2 Axle-Back Exhaust | MagnaFlow Resonated X-Pipe | Resonator Delete | Vmax Ported Throttle Body | GM Strut Tower Brace | JDP Tow Hook | Vitesse Throttle Controller Aesthetic Mods Chrome Peek-A-Boo Door Handles | Interior Accessories Kit | OEM RS HIDs w/ 6000k Bulbs & 5000k LED Fogs | Tail Light, Marker Light, & Turn Signal Tint | Tru-Sequence Sequential Turn Signals & Brake Lights | Silver Fade Gill Stripes | Carbon Fiber Bowties | Various Chrome/Painted/Carbon Fiber Items |
|
|
|
|
|
|
#6 |
![]() Drives: 2014 Camaro 1SS Join Date: Nov 2014
Location: Michigan
Posts: 525
|
|
|
|
|
|
|
#7 |
![]() ![]() ![]() Drives: 2013 Blue Ray 1LS M6 Join Date: Apr 2013
Location: Pittsburgh, PA
Posts: 1,227
|
I actually have one. It clears the lower edge of the rear fascia by about 1/8". Just peaks out from underneath. No cutting required (at least on a '13 LS with no ground effects).
__________________
Performance Mods
Elite Catch Can | CAI Intake with Scoop & Washer Bottle Relocation | MRT v2 Axle-Back Exhaust | MagnaFlow Resonated X-Pipe | Resonator Delete | Vmax Ported Throttle Body | GM Strut Tower Brace | JDP Tow Hook | Vitesse Throttle Controller Aesthetic Mods Chrome Peek-A-Boo Door Handles | Interior Accessories Kit | OEM RS HIDs w/ 6000k Bulbs & 5000k LED Fogs | Tail Light, Marker Light, & Turn Signal Tint | Tru-Sequence Sequential Turn Signals & Brake Lights | Silver Fade Gill Stripes | Carbon Fiber Bowties | Various Chrome/Painted/Carbon Fiber Items |
|
|
|
|
|
#8 |
|
"Old School"
Drives: 2010 2SS L99 Join Date: Apr 2015
Location: Sherrills Ford, NC
Posts: 1,294
|
That is an accident waiting to happen.
|
|
|
|
|
|
#9 |
![]() Drives: 2014 Camaro 1SS Join Date: Nov 2014
Location: Michigan
Posts: 525
|
|
|
|
|
|
|
#10 |
![]() Drives: 2014 CRT LT Join Date: Jul 2015
Location: Cleveland
Posts: 151
|
I had a Saris Bones 3 on my old Impala that tore the crap out of the paint. As the weight of bikes takes pressure off the top trunk mount point, dust and other debris will get under the padding and it will act like sandpaper. Take it back if you can and get a hitch mount before the clear coat is damaged.
|
|
|
|
|
|
#11 |
|
"Old School"
Drives: 2010 2SS L99 Join Date: Apr 2015
Location: Sherrills Ford, NC
Posts: 1,294
|
|
|
|
|
|
|
#12 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2013 1SS 1LE Black - Std Exhaust Join Date: Mar 2013
Location: Brunswick, GA
Posts: 3,622
|
I do not think you hate your car (which is why I am saying something), but I do think that rack is going to do more damage than you think. If your paint is being touched, it is going to get hurt.
And for what its worth, I would not treat a Lamborghini any different than I would any other car I owned as a daily driver. |
|
|
|
|
|
#13 | |
![]() Drives: 2014 Camaro 1SS Join Date: Nov 2014
Location: Michigan
Posts: 525
|
Quote:
I get that some people baby their cars, I do not. It's a car that I use for daily driving, it doesn't go to car shows. The paint gets treated regularly, it will be fine. |
|
|
|
|
|
|
#14 | |
|
"Old School"
Drives: 2010 2SS L99 Join Date: Apr 2015
Location: Sherrills Ford, NC
Posts: 1,294
|
Quote:
|
|
|
|
|
|
|
|
|
![]() |
|
|