HDMI input for MyLink screen working! - HD-LINK IW03GF - Page 7 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jst1970 · 08-05-2015, 06:56 PM

The connection that has all those RCA jacks on it. Use audio out L & R - connect and RCA to 3.5mm adapter to your center console aux in.

Anything like this - this is what i use.

http://www.amazon.com/gp/product/B00...ilpage_o01_s01

jwhutton52 · 08-05-2015, 07:11 PM

Quote:

Originally Posted by jst1970

The connection that has all those RCA jacks on it. Use audio out L & R - connect and RCA to 3.5mm adapter to your center console aux in.

Anything like this - this is what i use.

http://www.amazon.com/gp/product/B00...ilpage_o01_s01

So the audio comes out of the Korean HD Link RCA jacks? So audio is going in to the HDMI port, correct? I want to connect an ApCast, Chromecast and a HDMI BluRay player. I bought a 3 way HDMI switch to chose between them. That way I can leave them plugged in all of the time.

jst1970 · 08-05-2015, 07:21 PM

correct

jwhutton52 · 08-05-2015, 08:07 PM

Quote:

Originally Posted by jst1970

correct

Thanks for clearing that up.

Deam0n · 08-05-2015, 09:14 PM

They announce on the website plug-and-play... is it really like that? I mean do we connect this to OBDC port? or do we have to remove the radio and tap some wires?

jst1970 · 08-05-2015, 09:32 PM

3 wire taps and an adapter between the screen and the unit. power, ground. done

bnorman · 08-09-2015, 04:43 PM

Quote:

Originally Posted by jwhutton52

So the audio comes out of the Korean HD Link RCA jacks? So audio is going in to the HDMI port, correct? I want to connect an ApCast, Chromecast and a HDMI BluRay player. I bought a 3 way HDMI switch to chose between them. That way I can leave them plugged in all of the time.

Which 3 way switch did you buy and what are you using for power?

Thanks

jwhutton52 · 08-09-2015, 10:24 PM

Quote:

Originally Posted by bnorman

Which 3 way switch did you buy and what are you using for power?

Thanks

I got this one from Amazon recommended by another member. Requires no power.

http://www.amazon.com/gp/product/B00..._detailpages00

bnorman · 08-09-2015, 10:52 PM

Thanks. I've started gathering pieces that I will need, like the RCA to Aux cable, posi taps for wire splicing but I'm on the fence on whether to split the HDMI for another input other then the Apcast that I will get with it.

From what I've read it'll mirror the phone. Not sure I need Apcast and Chromecast as they seem to get to the same end result.

Basically going to use this for mirroring Navigation, Dash Cam and try out the Android Auto app. No BluRay player so I'm on the fence. Possibly a Firestick with XBMC on it, but even that seems like the Mylink is getting awfully crowded with things to distract me.

Thanks for the link though

Sent from my XT1254 using Tapatalk

bnorman · 08-15-2015, 04:17 PM

Did anyone already have a factory installed reverse camera when they put this in? I seem to have lost mine, but everything else works. I even get the grid lines. I have changed the settings on Dipstick #3 to both on and off. Gonna mess in the Config screen to see if there is a setting in the Reverse Camera section. Any help would be appreciated and I will be getting a hold of whoever I emailed to purchase it to see if there is a something I overlooked.

bnorman · 08-15-2015, 04:51 PM

Quote:

Originally Posted by bnorman

Did anyone already have a factory installed reverse camera when they put this in? I seem to have lost mine, but everything else works. I even get the grid lines. I have changed the settings on Dipstick #3 to both on and off. Gonna mess in the Config screen to see if there is a setting in the Reverse Camera section. Any help would be appreciated and I will be getting a hold of whoever I emailed to purchase it to see if there is a something I overlooked.

Never mind, got it.

Sent from my XT1254 using Tapatalk

dzmitry · 08-17-2015, 11:53 PM

One more install

jwhutton52 · 08-18-2015, 08:16 AM

What is the player you have hooked to the HDMI port? Is it a DVD player? Thanks.

dzmitry · 08-18-2015, 03:58 PM

Quote:

Originally Posted by jwhutton52

What is the player you have hooked to the HDMI port? Is it a DVD player? Thanks.

Actually it's just a Raspberry Pi with Xbmc/kodi

08-05-2015, 06:56 PM	#85
jst1970 Camaro addict Drives: 2014 SS L99 i1 procharger Join Date: Jul 2015 Location: Murrieta, CA Posts: 175	The connection that has all those RCA jacks on it. Use audio out L & R - connect and RCA to 3.5mm adapter to your center console aux in. Anything like this - this is what i use. http://www.amazon.com/gp/product/B00...ilpage_o01_s01

08-05-2015, 07:21 PM	#87
jst1970 Camaro addict Drives: 2014 SS L99 i1 procharger Join Date: Jul 2015 Location: Murrieta, CA Posts: 175	correct

08-05-2015, 09:14 PM	#89
Deam0n Drives: 2018 Camaro 2SS (European Version) Join Date: Mar 2014 Location: Luxembourg Posts: 70	They announce on the website plug-and-play... is it really like that? I mean do we connect this to OBDC port? or do we have to remove the radio and tap some wires?

08-05-2015, 09:32 PM	#90
jst1970 Camaro addict Drives: 2014 SS L99 i1 procharger Join Date: Jul 2015 Location: Murrieta, CA Posts: 175	3 wire taps and an adapter between the screen and the unit. power, ground. done

08-09-2015, 10:52 PM	#93
bnorman Drives: 2015 1SS Join Date: Sep 2012 Location: Jax, Fl Posts: 189	Thanks. I've started gathering pieces that I will need, like the RCA to Aux cable, posi taps for wire splicing but I'm on the fence on whether to split the HDMI for another input other then the Apcast that I will get with it. From what I've read it'll mirror the phone. Not sure I need Apcast and Chromecast as they seem to get to the same end result. Basically going to use this for mirroring Navigation, Dash Cam and try out the Android Auto app. No BluRay player so I'm on the fence. Possibly a Firestick with XBMC on it, but even that seems like the Mylink is getting awfully crowded with things to distract me. Thanks for the link though Sent from my XT1254 using Tapatalk

08-15-2015, 04:17 PM	#94
bnorman Drives: 2015 1SS Join Date: Sep 2012 Location: Jax, Fl Posts: 189	Did anyone already have a factory installed reverse camera when they put this in? I seem to have lost mine, but everything else works. I even get the grid lines. I have changed the settings on Dipstick #3 to both on and off. Gonna mess in the Config screen to see if there is a setting in the Reverse Camera section. Any help would be appreciated and I will be getting a hold of whoever I emailed to purchase it to see if there is a something I overlooked.

08-18-2015, 08:16 AM	#97
jwhutton52 Drives: 2014 Camaro 2SS / RS Coupe Join Date: Jul 2015 Location: Rochester, NY Posts: 31	What is the player you have hooked to the HDMI port? Is it a DVD player? Thanks.