Night fury - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Rctreece · 08-07-2015, 01:24 PM

Got the guys at Lethal setup to install my cam on the 24th of this month. Can't wait.

vroomapunk · 08-07-2015, 02:16 PM

Congrats! A whole new car

BenningJ · 08-07-2015, 02:59 PM

I just ordered this cam as well. Doing the install myself but I'm looking forward to the change in performance and sound.

Be sure you post up a video.

avido · 08-07-2015, 03:11 PM

i recently installed this cam. i love it. it's not a complicated hub,but it takes you a bit long time

that's the sound i got.

vroomapunk · 08-07-2015, 03:11 PM

Quote:

Originally Posted by BenningJ

I just ordered this cam as well. Doing the install myself but I'm looking forward to the change in performance and sound.

Be sure you post up a video.

muahaha

1fast · 08-07-2015, 03:48 PM

Congrats good cam i personal love tuning those cams you will enjoy

BenningJ · 08-07-2015, 03:59 PM

Quote:

Originally Posted by vroomapunk

muahaha

What is your idle set at in this video? 850rpm?

CTSVBiggie · 08-07-2015, 04:05 PM

For those of you with this cam, did you swap out springs(assume so) and if so to what? PushRods/oil pump anything else other than the cam swap?

And who has put some serious miles on this cam? Any reliability issues? Replacing valve springs regularly?

MightymouseSS · 08-07-2015, 04:21 PM

I wenf with 7.425 push rods and BTR .660 spring with Ti retainers.

CTSVBiggie · 08-07-2015, 04:26 PM

How many miles have you racked up since? Any issues?

Rctreece · 08-07-2015, 04:59 PM

Quote:

Originally Posted by CTSVBiggie

For those of you with this cam, did you swap out springs(assume so) and if so to what? PushRods/oil pump anything else other than the cam swap?

And who has put some serious miles on this cam? Any reliability issues? Replacing valve springs regularly?

Yea pump,chain,springs,trunnions,pushrods ect

CTSVBiggie · 08-07-2015, 05:14 PM

I did all of the above(short Trunnions) on my CTSV1 when I cammed it. But it was a BABY cam. And Im just wondering what this much larger cam does to the valvetrain in terms of reliability through the miles.

spadz93 · 08-08-2015, 12:42 AM

I hate you guys. You're all gonna make me go broke

Rctreece · 08-08-2015, 07:21 AM

Anybody know a decent hotel near their shop?

08-07-2015, 01:24 PM	#1
Rctreece 2013 Victory Red LS3 Vert Drives: 2013 SS/RS Join Date: Jul 2013 Location: Caledonia, MS Posts: 323	Night fury Got the guys at Lethal setup to install my cam on the 24th of this month. Can't wait.

08-07-2015, 02:16 PM	#2
vroomapunk [COTW 5/12/14] Drives: 2012 CRT NF Cammed 2SS/RS For Sale Join Date: Oct 2011 Location: NOLA Posts: 6,115 View My Garage	Congrats! A whole new car __________________

08-07-2015, 02:59 PM	#3
BenningJ Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011 Location: Cedar Falls, Iowa Posts: 1,581 View My Garage	I just ordered this cam as well. Doing the install myself but I'm looking forward to the change in performance and sound. Be sure you post up a video. __________________ 2013 Camaro 1SS/RS - Ashen Gray Metallic \| LS3 \| CAI Inductions, Inc Intake \| Vmax Ported Throttle Body \| Dynatech 1.875" Long Tube Headers \| Apex Scoop & Washer Bottle Relocation \| Lethal Racing Night Fury Cam \| BTR 7.400" Push Rods \|LS2 Dampener \| Melling 10296 Oil Pump \| IWIS Chain \| BTR .660" Dual Valve Springs \| BTR Trunion Upgrade Kit \| Lethal Racing Tuned \| Anvil Notch Spoiler \| BMR Split Drop Springs \| Eaton TrueTrac \| GM 3.91 Gears \| LPW Diff Cover \| Rohana RF2 275/40 20x10F 315/35 20x11R \| BMR Polyurethane Motor Mounts

08-07-2015, 03:48 PM	#6
1fast 8.60 @ 157 @ 4200lbs Drives: 2010 Gen 5 Join Date: Nov 2013 Location: Warrenton, va Posts: 300 View My Garage	cam Congrats good cam i personal love tuning those cams you will enjoy

08-07-2015, 04:05 PM	#8
CTSVBiggie Drives: 2013 1LE Join Date: Mar 2013 Location: maryland Posts: 800	For those of you with this cam, did you swap out springs(assume so) and if so to what? PushRods/oil pump anything else other than the cam swap? And who has put some serious miles on this cam? Any reliability issues? Replacing valve springs regularly? __________________ >>>>>>>>>>>MUST READ DISCLAIMER<<<<<<<<<<<< 2013 Crystal Red Tint Coat - 2SS RS 1LE

08-07-2015, 04:21 PM	#9
MightymouseSS Drives: 2011 LS3 Join Date: Jan 2012 Location: el paso tx Posts: 547	I wenf with 7.425 push rods and BTR .660 spring with Ti retainers. __________________ Vararam Stainless Works Headers Vmax TB SLP loudmouth 2 Nightfury Cam Mike Norris CC Tuned by Southwest Speed

08-07-2015, 04:26 PM	#10
CTSVBiggie Drives: 2013 1LE Join Date: Mar 2013 Location: maryland Posts: 800	How many miles have you racked up since? Any issues? __________________ >>>>>>>>>>>MUST READ DISCLAIMER<<<<<<<<<<<< 2013 Crystal Red Tint Coat - 2SS RS 1LE

08-07-2015, 05:14 PM	#12
CTSVBiggie Drives: 2013 1LE Join Date: Mar 2013 Location: maryland Posts: 800	I did all of the above(short Trunnions) on my CTSV1 when I cammed it. But it was a BABY cam. And Im just wondering what this much larger cam does to the valvetrain in terms of reliability through the miles. __________________ >>>>>>>>>>>MUST READ DISCLAIMER<<<<<<<<<<<< 2013 Crystal Red Tint Coat - 2SS RS 1LE

08-08-2015, 12:42 AM	#13
spadz93 BUMBL Z Drives: 2015 ZL1 Join Date: Nov 2013 Location: Northern NJ Posts: 2,577 View My Garage	I hate you guys. You're all gonna make me go broke __________________ Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq

08-08-2015, 07:21 AM	#14
Rctreece 2013 Victory Red LS3 Vert Drives: 2013 SS/RS Join Date: Jul 2013 Location: Caledonia, MS Posts: 323	Anybody know a decent hotel near their shop?