08-07-2015, 11:49 PM | #1 |
BUMBL Z
|
WTB: AAC Pre-bent mail slot scanner
As title says, pre-bent only please. Let me know what you got!
__________________
Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP
Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
08-10-2015, 10:55 AM | #2 |
BUMBL Z
|
Found one
__________________
Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP
Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
08-14-2015, 12:06 PM | #3 |
Drives: 2011 Camaro 2SS/RS Join Date: Apr 2011
Location: Arizona
Posts: 70
|
Do you mind sharing where? I am also looking.
__________________
|
08-22-2015, 03:08 PM | #4 |
BUMBL Z
|
Sorry on the delay, I just went with AAC, only to find out theyre on backorder there as well :/
__________________
Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP
Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
10-06-2015, 06:49 PM | #5 |
Drives: 2011 Camaro 2SS/RS Join Date: Apr 2011
Location: Arizona
Posts: 70
|
Ah thanks. Didn't know they had pre bent
__________________
|
10-06-2015, 07:16 PM | #6 |
Drives: 2013 LS Join Date: May 2013
Location: Nashville
Posts: 679
|
That product sucks. I have all their other products and this one bummed me out. I returned it. The silicone melted all over the mailslot and it looked horribe during the day. Just my two cents.
__________________
|
10-06-2015, 08:23 PM | #7 |
My Dream Car
Drives: 2011 SIM LS3 1SS Join Date: Jul 2009
Location: staten island
Posts: 1,534
|
You are better off going to a place like auto zone and buy the water proof ones, I bought two 12 inch strips attached with 3 m tape and it was a perfect fit, hooked them up to my side marker lights , although you can always set it up on a seperate switch
__________________
CAI intake/ADM Scoop/Stainless Power Headers/Dynatech cat back exhaust/Vitesse Throttle Control/ Ported Throttle Body/QTP Electric Cutouts/ 3.91 gears and janetty rear posi/ Tuned by Janetty racing
|
10-07-2015, 12:50 PM | #8 |
Drives: 2013 LS Join Date: May 2013
Location: Nashville
Posts: 679
|
I agree
__________________
|
10-11-2015, 08:06 AM | #9 |
Drives: 2011 CAMARO 2SS/RS Join Date: Feb 2013
Location: SAN DIEGO & TEXAS
Posts: 345
|
Phastek has them in stock right now, i just called them yesterday to order me one.
|
|
|
|
|