K&N Filters Updated - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

tjbusa · 06-26-2009, 10:57 AM

I was weak, I bought one last night. Now if I can just get my car.....

salohi · 08-09-2009, 02:21 AM

guy's

what do you think of that

http://www.knfilters.com/news/news.aspx?ID=2074

looks ordinarily no power will change

Watchamacoolitt · 08-09-2009, 03:56 AM

Quote:

Originally Posted by salohi

guy's

what do you think of that

http://www.knfilters.com/news/news.aspx?ID=2074

looks ordinarily no power will change

Of course there wouldn't be any power gain it's just an air filter.

*KILLER74Z28* · 08-09-2009, 04:25 AM

Quote:

Originally Posted by salohi

guy's

what do you think of that

http://www.knfilters.com/news/news.aspx?ID=2074

looks ordinarily no power will change

Quote:

Originally Posted by Watchamacoolitt

Of course there wouldn't be any power gain it's just an air filter.

BZZZZZZZ WRONG... The stock Air Filter is definitely suffocating the LS3 and L99. Your Camaro will breathe better and you will see some gain. I have this in my Camaro to hold me over until I choose a FIPK/Cold Air Kit. After installing the filter I could tell the difference in both performance and sound. If you are not in the market for a FIPK/Cold Air Kit then this is worth the money.

ZZcamaro · 08-10-2009, 06:12 PM

I have the air filters for the V6 and the V8 in stock...also have the oil filters in stock!!!

fontenl · 08-29-2009, 12:01 PM

Just wondering if anyone knew when K&N was coming out with a CAI.

ffrcobra_65 · 08-29-2009, 12:29 PM

Yes but no idea when it will be available.

patriotpa · 08-29-2009, 12:38 PM

Just get a K&N filter. How much difference can a piece of pipe the same size as the old one make anyhow?

Melson · 08-29-2009, 01:33 PM

About 19HP if you get a ADM intake!

monza66mo · 08-29-2009, 06:20 PM

Hennessy's CAI uses a K&N filter

fontenl · 08-29-2009, 10:19 PM

I may go with the Hennessy CAI, but undecided if I want the stainless steal or not. Any one know if there is any problems with the MAF on the Hennessy?

topgun1 · 10-06-2009, 09:59 PM

I searched for this topic and couldnt' find much. I can't believe how long it is taking K&N to produce this. Does anyone have any info on a release date?

2SSRS@Gen5diy · 10-06-2009, 10:01 PM

End of November and if the gods like me i will have one maybe by the 15 of november.

kelleyperformance · 10-06-2009, 10:02 PM

no, but so far in my own experiences in the shop over the past few years, the K&N kits have ALWAYS had higher IATs than the more thought out intakes such as airaid, rotofab, etc etc. the flow was never an issue, as they are "father" of the oiled element filter... but usually its just a tiny heat shield that doesnt even seal to anything and a filter thrown on a chrome tube. they always look nice, and im not calling it a bad product... just not a top contender for good IATs

08-09-2009, 02:21 AM	#72
salohi Drives: 90 Black Camaro, 02 Sable Join Date: Mar 2009 Location: KSA Posts: 127	K&N air intake guy's what do you think of that http://www.knfilters.com/news/news.aspx?ID=2074 looks ordinarily no power will change

08-29-2009, 12:01 PM	#76
fontenl Drives: chevrolet camaro ss Ls3 Join Date: Aug 2009 Location: baton rouge Posts: 28	K&N cold air intake Just wondering if anyone knew when K&N was coming out with a CAI.

08-29-2009, 01:33 PM	#79
Melson Drives: Wild Cherry Join Date: Nov 2008 Location: Keller, Texas Posts: 430	About 19HP if you get a ADM intake! __________________ 2010 RJT 2SS/RS L99 CAMARO ARH 1 7/8" LT HEADERS W/ HF CATS MAGNAFLOW 3" COMP EXHAUST ADM PERFORMANCE CAI ADM PERFORMANCE CUSTOM TUNE ADM PERFORMANCE PORTED THROTTLE BODY ADM PERFORMANCE TRANS COOLER 3.45 GEARS BMR TRAILING ARMS

08-29-2009, 06:20 PM	#80
monza66mo Driving daily Drives: '17 2SS Join Date: May 2009 Location: Missouri Posts: 79 View My Garage	Hennessy's CAI uses a K&N filter __________________ Art in Missouri

10-06-2009, 09:59 PM	#82
topgun1 Drives: 10 SIM 2SS/RS LS3 Join Date: May 2008 Location: Winston-Salem, NC Posts: 1,939 View My Garage	Update on K&N CAI? I searched for this topic and couldnt' find much. I can't believe how long it is taking K&N to produce this. Does anyone have any info on a release date? __________________ 5th Gen Camaros of the Carolinas SIM, 2SS/RS LS3 5/7/11 453.9 RWHP 427.5 RWTQ VMS Stage 2.5 Comp Cams kit, Cold Air Inductions intake, ADM race scoop, DT 1 3/4" headers, Solo cats, 3" Magnaflow catback, Pypes cutouts, HP tune, H&R SuperSport springs, Eibach sways/spacers, TexasSpeed UD pulley, LSR tensioner pulley, Barton shifter, skip shift eliminator, powder-coated calipers, R1 concept rotors, StopTech pads, Granatelli wires, Lloyds mats, tint, AAC afterburner taillamps, AAC scanner/sidemarkers, SRP pedals, custom engine cover, black bowties, Ridergraphix hood spears....

06-26-2009, 10:57 AM	#71
tjbusa Serious Sleeper Drives: 2010 CGM 2SS/RS M6 Join Date: Nov 2008 Location: Lexington,SC Posts: 3,129	I was weak, I bought one last night. Now if I can just get my car.....

08-10-2009, 06:12 PM	#75
ZZcamaro Drives: 2SS w/ ZZ427 Package!! Join Date: Oct 2008 Location: Pittsburgh, PA Posts: 2,699	I have the air filters for the V6 and the V8 in stock...also have the oil filters in stock!!!

08-29-2009, 12:29 PM	#77
ffrcobra_65 Account Suspended Drives: SuperCharged 2SS/RS IOM MN6 Join Date: May 2009 Location: CA Posts: 5,094	Yes but no idea when it will be available.

08-29-2009, 12:38 PM	#78
patriotpa Account Suspended Drives: 02 Silverado, 09 Vue, 10 1SS Join Date: Aug 2008 Location: Tired of apologizing when we should be kickin' butt! Posts: 1,962 View My Garage	Just get a K&N filter. How much difference can a piece of pipe the same size as the old one make anyhow?

08-29-2009, 10:19 PM	#81
fontenl Drives: chevrolet camaro ss Ls3 Join Date: Aug 2009 Location: baton rouge Posts: 28	I may go with the Hennessy CAI, but undecided if I want the stainless steal or not. Any one know if there is any problems with the MAF on the Hennessy?

10-06-2009, 10:01 PM	#83
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	End of November and if the gods like me i will have one maybe by the 15 of november.

10-06-2009, 10:02 PM	#84
kelleyperformance Drives: DD- 15' Chevy SS Sedan Join Date: Oct 2009 Location: Ft. Lauderdale Posts: 233	no, but so far in my own experiences in the shop over the past few years, the K&N kits have ALWAYS had higher IATs than the more thought out intakes such as airaid, rotofab, etc etc. the flow was never an issue, as they are "father" of the oiled element filter... but usually its just a tiny heat shield that doesnt even seal to anything and a filter thrown on a chrome tube. they always look nice, and im not calling it a bad product... just not a top contender for good IATs __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How about a barrel of oil for around $16?	Blownhotrodder	General Automotive + Other Cars Discussion	19	03-06-2009 08:25 PM
Synthetic?	shroomjohn	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	40	09-18-2008 02:31 PM
The 3,000 Mile Oil Change Myth	KILLER74Z28	General Automotive + Other Cars Discussion	35	07-20-2008 10:02 PM
Major U.S. oil source is tapped	KILLER74Z28	Off-topic Discussions	32	10-30-2007 10:47 AM