Will these fit? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Rico · 08-31-2015, 09:56 PM

I want to buy a set of Factory Reproduction drag wheels (18x12) and wondering if these tires would fit. This is a pretty good price if they work. Thanks

http://www.jegs.com/i/Hoosier/522/17...rentProductId=

760bowtie · 09-01-2015, 07:02 AM

Those are only 26" in diameter. Check out the wheels/tire sticky on the dragstrip section. I think they recommend that you not go lower that 27 inches. There's a member who fit the Hoosier DR2 (325/45/18) on some 18x9.5 wheels so I think those would fit perfectly on the FR 18x11 wheels that you plan to buy. BTW, the DR2 are only like $20 more per tire than the ones on the link you posted. http://www.tirerack.com/tires/tires....dewall=Painted White Letters&partnum=245R8DDR2&tab=Sizes

Rico · 09-01-2015, 12:29 PM

Thanks for the suggestion, I'll check them out. I'm just surprised at how much cheaper these are then for MT drag radials.

760bowtie · 09-01-2015, 01:51 PM

Yea I've seen good reviews on them and would go with those but they don't fit because of my height in the rear.

08-31-2015, 09:56 PM	#1
Rico Flying da helicopter Drives: Black SS/RS Join Date: Oct 2009 Location: HI Posts: 1,215 View My Garage	Will these fit? I want to buy a set of Factory Reproduction drag wheels (18x12) and wondering if these tires would fit. This is a pretty good price if they work. Thanks http://www.jegs.com/i/Hoosier/522/17...rentProductId=

09-01-2015, 07:02 AM	#2
760bowtie Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014 Location: Oceanside, CA Posts: 1,487	Those are only 26" in diameter. Check out the wheels/tire sticky on the dragstrip section. I think they recommend that you not go lower that 27 inches. There's a member who fit the Hoosier DR2 (325/45/18) on some 18x9.5 wheels so I think those would fit perfectly on the FR 18x11 wheels that you plan to buy. BTW, the DR2 are only like $20 more per tire than the ones on the link you posted. http://www.tirerack.com/tires/tires....dewall=Painted White Letters&partnum=245R8DDR2&tab=Sizes __________________ AGP 57/57 turbos and Dual Pump System, NA Cam, McLeod RXT clutch, MGW shifter, ZL1 Rear End, BMR Trailing Arms/Toe Rods, Pegasus Solid Cradle Bushings 10.7 @140mph M6

09-01-2015, 01:51 PM	#4
760bowtie Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014 Location: Oceanside, CA Posts: 1,487	Yea I've seen good reviews on them and would go with those but they don't fit because of my height in the rear. __________________ AGP 57/57 turbos and Dual Pump System, NA Cam, McLeod RXT clutch, MGW shifter, ZL1 Rear End, BMR Trailing Arms/Toe Rods, Pegasus Solid Cradle Bushings 10.7 @140mph M6

09-01-2015, 12:29 PM	#3
Rico Flying da helicopter Drives: Black SS/RS Join Date: Oct 2009 Location: HI Posts: 1,215 View My Garage	Thanks for the suggestion, I'll check them out. I'm just surprised at how much cheaper these are then for MT drag radials.