Looking to see please CARid dash kit - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

kinpin · 09-03-2015, 10:12 PM

Dose anyone have any photos of the real carbon fiber red and black CARid dash kit installed .. If so can you please post them . I am thinking about buying it for my ZL1 .. Thank you

spadz93 · 09-04-2015, 07:06 AM

Do yourself a favor. You have what i'm sure is a gorgeous ZL1. Don't deface it with any CarID garbage, it's all poorly made products from what i've read. Shop for ideas there, but take your business elsewhere

BkinBlk · 09-04-2015, 08:27 AM

Something like this? The pieces fit well. I think it looks good and they gave me plenty of extra pieces. Too much, in fact, that I didn't use them all. Prep is key for a good fit, and take your time.

BkinBlk · 09-04-2015, 08:32 AM

A little closer pic for you.

Alex Benavitz · 09-04-2015, 08:32 AM

Don't buy carid trash

BkinBlk · 09-04-2015, 08:39 AM

Carid does not make the dash kits....Remin does. Maybe Carid, has done somebody wrong, but they worked well for me. If you don't want to order through Carid, then I am sure there may be other places (Amazon, Ebay etc.) that you can order through.

christianchevell · 09-04-2015, 09:59 AM

mimousa has a better kit, I installed , and it was ok but had to remove some of it as it was to much, I took it off the air vents etc, and toned it down even though it burled wood looks the edges of the "sticker" do show on a lot of stuff, and BTW its a PITA to remove slowly carefully and then clean up with goo-gone. It does protect things nicely though, does not like bends too much and removed from my steering wheel as well its had to bend to wrap and its stiff, and looks better stock.

robotfighter · 09-04-2015, 10:15 AM

I installed one of their garbage kits. I hated it. The edges were always visible, the material was tacky, and the pieces did not fit correctly. And they refused to work with me to correct any of the issues. Buying from them is like throwing money away and getting kicked in the nuts.

09-03-2015, 10:12 PM	#1
kinpin 618 RWHP Drives: 2014 ZL1 Join Date: Mar 2014 Location: Albany New York Posts: 772 View My Garage	Looking to see please CARid dash kit Dose anyone have any photos of the real carbon fiber red and black CARid dash kit installed .. If so can you please post them . I am thinking about buying it for my ZL1 .. Thank you

09-04-2015, 07:06 AM	#2
spadz93 BUMBL Z Drives: 2015 ZL1 Join Date: Nov 2013 Location: Northern NJ Posts: 2,577 View My Garage	Do yourself a favor. You have what i'm sure is a gorgeous ZL1. Don't deface it with any CarID garbage, it's all poorly made products from what i've read. Shop for ideas there, but take your business elsewhere __________________ Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq

09-04-2015, 08:27 AM	#3
BkinBlk Drives: 2015 2LT RS Join Date: Feb 2015 Location: Wisconsin Posts: 247	Something like this? The pieces fit well. I think it looks good and they gave me plenty of extra pieces. Too much, in fact, that I didn't use them all. Prep is key for a good fit, and take your time. __________________ It is what it is!

09-04-2015, 08:32 AM	#4
BkinBlk Drives: 2015 2LT RS Join Date: Feb 2015 Location: Wisconsin Posts: 247	A little closer pic for you. __________________ It is what it is!

09-04-2015, 08:39 AM	#6
BkinBlk Drives: 2015 2LT RS Join Date: Feb 2015 Location: Wisconsin Posts: 247	Carid does not make the dash kits....Remin does. Maybe Carid, has done somebody wrong, but they worked well for me. If you don't want to order through Carid, then I am sure there may be other places (Amazon, Ebay etc.) that you can order through. __________________ It is what it is!

09-04-2015, 08:32 AM	#5
Alex Benavitz Drives: 2014 Chevrolet Camaro LFX Join Date: Feb 2015 Location: Naples Florida Posts: 100 View My Garage	Don't buy carid trash

09-04-2015, 09:59 AM	#7
christianchevell old school chevy rodder Drives: 2013 2SS/RS Manual,DM exhaust,CRT Join Date: Jul 2012 Location: Oregon Posts: 5,592 View My Garage	mimousa has a better kit, I installed , and it was ok but had to remove some of it as it was to much, I took it off the air vents etc, and toned it down even though it burled wood looks the edges of the "sticker" do show on a lot of stuff, and BTW its a PITA to remove slowly carefully and then clean up with goo-gone. It does protect things nicely though, does not like bends too much and removed from my steering wheel as well its had to bend to wrap and its stiff, and looks better stock. __________________ 2021 Wild Cherry ZL1 A10, Sunroof, Data,Red Carbon Interior, Nav, RotoFab Big Gulp , Elite x2ultra, Borla ATAK, Driveshaft shop, full BMR susp, Speed eng. valve covers, intercoolers, ATI , 2650 MAG, DSX lid, 103 NW, JBA shorties, Lingenfelter check, 1le wheels, spoiler and diveplanes, PCV, Big3racing ice tank, [SIGPIC]etc....

09-04-2015, 10:15 AM	#8
robotfighter Drives: Black 2011 Camaro 2LS Join Date: Nov 2011 Location: Los Angeles Posts: 249	I installed one of their garbage kits. I hated it. The edges were always visible, the material was tacky, and the pieces did not fit correctly. And they refused to work with me to correct any of the issues. Buying from them is like throwing money away and getting kicked in the nuts.