Gap between headlight and bumper cover - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SunnySideUpII · 09-16-2015, 05:55 AM

Guys,

I recently had my front splitter changed. So the dealer had to remove the front bumper completely and put it back. Now when I look at the headlights from the front of the car, I notice a 1/4 inch gap between the headlight lense and the bumper. The gap is the same around the lense.

I simply do not remember if that gap was there before. It looks a little odd, it feels like there should be some sort of rubber seal between the headlight and the bumper.

Could someone please confirm there should be a seal there, or is the gap normal?

Thanks.

boondocksaint · 09-16-2015, 09:10 AM

There's a gap on mine, I think.

Jsmith18 · 09-16-2015, 09:22 AM

There's a gap on mine, you're fine op

KaBoom1701 · 09-16-2015, 02:35 PM

Picture?

Snickers · 09-16-2015, 02:41 PM

thats totally normal.
there is nothing missing and no way to change it.

SunnySideUpII · 09-17-2015, 05:07 AM

Relief!

Thanks guys. I was just concerned about water going in on a rainy day or in car wash, etc. but if it's designed that way, it should be fine.

ZED SLED · 09-17-2015, 07:49 AM

Well, the gap is more like an 1/8", not a quarter. Then again, I hold my thumb and forefinger about 3" apart and tell my wife that's 9"

Ron_Robinson1 · 09-17-2015, 02:27 PM

Quote:

Originally Posted by ZED SLED

Well, the gap is more like an 1/8", not a quarter. Then again, I hold my thumb and forefinger about 3" apart and tell my wife that's 9"

Hahaha Mark....

09-16-2015, 05:55 AM	#1
SunnySideUpII Drives: 2015 ZL1 Bright Yellow Join Date: Apr 2015 Location: Dubai Posts: 77	Gap between headlight and bumper cover Guys, I recently had my front splitter changed. So the dealer had to remove the front bumper completely and put it back. Now when I look at the headlights from the front of the car, I notice a 1/4 inch gap between the headlight lense and the bumper. The gap is the same around the lense. I simply do not remember if that gap was there before. It looks a little odd, it feels like there should be some sort of rubber seal between the headlight and the bumper. Could someone please confirm there should be a seal there, or is the gap normal? Thanks.

09-16-2015, 02:35 PM	#4
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,631	Picture? __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.

09-17-2015, 07:49 AM	#7
ZED SLED Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009 Location: South of Raleigh, NC Posts: 9,615 View My Garage	Well, the gap is more like an 1/8", not a quarter. Then again, I hold my thumb and forefinger about 3" apart and tell my wife that's 9" __________________

09-16-2015, 09:10 AM	#2
boondocksaint Cartoon Maus Drives: White ZL1, Chevroyota Prizolla Join Date: Aug 2013 Location: Charlotte, NC Posts: 303	There's a gap on mine, I think.

09-16-2015, 09:22 AM	#3
Jsmith18 Drives: 2013 Camaro LFX Join Date: Aug 2013 Location: Orlando, Florida Posts: 448 View My Garage	There's a gap on mine, you're fine op

09-16-2015, 02:41 PM	#5
Snickers Rumblebee Drives: ZL1 Rally Yellow Join Date: Apr 2013 Location: Germany Posts: 157	thats totally normal. there is nothing missing and no way to change it.

09-17-2015, 05:07 AM	#6
SunnySideUpII Drives: 2015 ZL1 Bright Yellow Join Date: Apr 2015 Location: Dubai Posts: 77	Relief! Thanks guys. I was just concerned about water going in on a rainy day or in car wash, etc. but if it's designed that way, it should be fine.