Meth Injection without tuning??

[david6509]

I've noticed a small reduction in iat temps, but the recovery speed has defiantly improved. This was just with running 100% demineralised water



Sent from my iPhone using Tapatalk

[ToddB]

Originally Posted by realcanuk

Agree with this and that is why gauges with customizable alerts are great. If bright flashing LED's go off, you wont miss it and can get off the gas as quickly as possible.

I actualy have my aeroforce gauge set to trigger a 120 decible siren I have installed under the dash if throtle position is over 90% and air fuel goes above 11.5. I first set it up to test it once by setting it to go off if AF was above 10.8 just to see if it worked and it scared the shit out of me when it went off. Lol This is the siren I used cheap and very loud. http://www.ebay.com/itm/Continuous-S...item4ad216821a

You have to get the relay output module for the aeroforce gauge to make it work.
Here is my meth tank. Lol

[david6509]

Tested with 100% water
Please note the video is in celsius not Fahrenheit

Hottest I could get it was
44 Celsius / 111 Fahrenheit

Ambient Temperature was
15 Celsius / 59 Fahrenheit

[video]http://youtu.be/Ro_gCo2dAU0[/video]




Sent from my iPhone using Tapatalk

[2SSCAMARO]

On the same night when the outside air temp is around 59F. Please make pass one without water injection and note the IAT's and your elapse time. Do a cool down, make a pass with water injection and note the IAT's and elapse time. Post up the data depicting the differences between the dry and wet passes done back to back.

[david6509]

Originally Posted by 2SSCAMARO

On the same night when the outside air temp is around 59F. Please make pass one without water injection and note the IAT's and your elapse time. Do a cool down, make a pass with water injection and note the IAT's and elapse time. Post up the data depicting the differences between the dry and wet passes done back to back.

Ill do it tonight, just got to wire in a switch when i get home so i can turn it off.

[david6509]

Comparison Video with injecting 100% water.

Dropped 12 degrees Celsius (53.6 degrees Fahrenheit)
off the iat 2 temp and halved the recovery time.

[video=youtube_share;Ro_gCo2dAU0]https://youtu.be/ntPu6_c5Wro[/video]

Sent from my iPhone using Tapatalk

[2SSCAMARO]

Originally Posted by david6509

Ill do it tonight, just got to wire in a switch when i get home so i can turn it off.

I didn't know the AEM units do not have an on/off switch incorporated into the control box.

[david6509]

Originally Posted by 2SSCAMARO

I didn't know the AEM units do not have an on/off switch incorporated into the control box.

It's just the arm wire needed to put it onto a switch



Sent from my iPhone using Tapatalk

[2SSCAMARO]

Better hurry up, the 59 degree weather is going fast. Summer is fast approaching.