09-28-2015, 09:01 PM | #1 |
Help front bumper removal 1969
OK I've taken the 4 bolts from the ends and the two in the middle and it still will not come off this is for a 69. Any help is appreciated
|
|
09-29-2015, 11:07 AM | #2 |
Drives: 2012 RS/2SS, 69 ProStreet Camaro Join Date: Oct 2011
Location: North NJ
Posts: 478
|
That should be it. Maybe some rust holding it on? I'd try a rubber mallet and or some rust penetrant on the brackets on the backside of the bumper. You could also disconnect the brackets that attach it to the subframe where they bolt to it and pull the bumper and brackets off as one and see if it'll come off that way.
Here's the picture out of the AIM. .
__________________
Last edited by PROZ11; 10-02-2015 at 09:38 AM. Reason: added pic |
|
|
|
|