LS3 ARH LT & Borla exhaust - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

chevyss · 08-31-2009, 12:57 AM

Sure sounds good. Thanks for sharing.

Jeanius · 08-31-2009, 01:27 AM

Quote:

Originally Posted by SwiftCat

I don't know about the rest of you, but I don't spend much time in the lower RPM range when I'm driving this thing, especially with a stick.

Thanks for the quick response, I was only concerned cause this is gonna be my daily driver, so I wont be over 3k rpm that often, well.....
well see once I get it

Santos · 08-31-2009, 02:34 PM

what are you referring to when you say dronedoes anybody have a clip they can share of what drone is cause im still confussed

A.R. Headers · 08-31-2009, 05:07 PM

Jekyll, With the ARH system installed, installing the Borla axleback is about a 1/2 -45 minute process. Like our system the axleback is designed to work with the factory exhaust. You simply need to cut the pipes leading up to the mufflers, slip them into the mufflers and clamp them up. It's as simple as that. The factory pipes that connect the 2 systems are 409 S/S and will work fine. You'll have to use maybe 16-20 inches of the factory pipe per side.

Swift, They hit you pretty hard. The install is 3 hours tops. As far as our gaskets, how about we haven't had a single failure in 4 years. They are manufactured by Flat Out Racing and are graphite. Anyone that says our gaskets are worthless knows not what he's looking at. I apprecite you going with ARH. Enjoy the system.

Nick

MEDISIN · 08-31-2009, 05:26 PM

Quote:

Originally Posted by A.R. Headers

Jekyll, With the ARH system installed, installing the Borla axleback is about a 1/2 -45 minute process. Like our system the axleback is designed to work with the factory exhaust. You simply need to cut the pipes leading up to the mufflers, slip them into the mufflers and clamp them up. It's as simple as that. The factory pipes that connect the 2 systems are 409 S/S and will work fine. You'll have to use maybe 16-20 inches of the factory pipe per side.

Swift, They hit you pretty hard. The install is 3 hours tops. As far as our gaskets, how about we haven't had a single failure in 4 years. They are manufactured by Flat Out Racing and are graphite. Anyone that says our gaskets are worthless knows not what he's looking at. I apprecite you going with ARH. Enjoy the system.

Nick

Nick, thanks for clarifying for us. We appreciate the info and the craftsmanship you guys put into your products! Can't wait to order mine

Quote:

Originally Posted by SwiftCat

Not really. It's sooo much richer in person. A camera/vid just can't capture the bandwidth it has live. Oh, and if you're getting it w/out cats, be prepared! This thing is a caged beast w/ cats. I can only imagine what it will be like when it can truly breath with a Vararam under the hood.

Swifty

SwiftCat, thanks for taking the time to answer questions and post that video for us. That will address a lot of people's curiosity about the ARH/Borla combination.

SwiftCat · 09-01-2009, 02:12 AM

Alright fellas,
Just thought I'd insert a few photos of the installation so you could get a good idea of how everything sits...enjoy!

Jekyll-N-Hyde · 09-01-2009, 06:54 AM

Ty Swift

Doc · 09-01-2009, 09:59 AM

Man that must have been a tough install if they had to turn your car upside down and sideways to install them!!

Looks and sounds great.

HeavyD · 09-01-2009, 11:28 AM

Quote:

Originally Posted by Doc

Man that must have been a tough install if they had to turn your car upside down and sideways to install them!!

Looks and sounds great.

LOL

SwiftCat · 09-01-2009, 12:54 PM

Quote:

Originally Posted by Doc

Man that must have been a tough install if they had to turn your car upside down and sideways to install them!!

Looks and sounds great.

Well, you know, I have been working out quite a bit lately; so they asked if I could hold it up for them from a few different positions while they turned a few wrenches.

Camar0wn3d · 09-01-2009, 01:09 PM

I have to say that this combination is the best sounding LS3 complete exhaust I have heard yet....I have the LMII and am waiting on my ARH order to get here...If the LMII doesn't do it for me it will be for sale and Borla will be in its place. Beautiful....and thanks for the pics and video!

khislop007 · 09-01-2009, 01:28 PM

Quote:

Originally Posted by Doc

Man that must have been a tough install if they had to turn your car upside down and sideways to install them!!

Looks and sounds great.

Quote:

Originally Posted by SwiftCat

Well, you know, I have been working out quite a bit lately; so they asked if I could hold it up for them from a few different positions while they turned a few wrenches.

Can't wait til I can put mine on! 3 more weeks hopefully

Doc · 09-01-2009, 01:34 PM

Quote:

Originally Posted by SwiftCat

Well, you know, I have been working out quite a bit lately; so they asked if I could hold it up for them from a few different positions while they turned a few wrenches.

Hmmm..... that must have been...'exhausting'....sorry, had to say it hehehe.

SwiftCat · 09-01-2009, 03:27 PM

Quote:

Originally Posted by Doc

Hmmm..... that must have been...'exhausting'....sorry, had to say it hehehe.

Not really...now that I have more HP, I can leap tall speedbumps in a single launch! :party0048:

08-31-2009, 02:34 PM	#59
Santos Santos Drives: 1SS Blk 6M ECS 1500 Join Date: Jul 2007 Location: Virginia Beach, Virginia Posts: 606 View My Garage	what are you referring to when you say dronedoes anybody have a clip they can share of what drone is cause im still confussed __________________

09-01-2009, 02:12 AM	#62
SwiftCat Get me my meds! Drives: 2010 SS/RS M6 & solid black, baby! Join Date: Jun 2009 Location: Maple Valley, Wa. Posts: 279	Alright fellas, Just thought I'd insert a few photos of the installation so you could get a good idea of how everything sits...enjoy! Attached Images

09-01-2009, 09:59 AM	#64
Doc Dances With Mustangs Drives: 2010 1SS/RS MT Join Date: May 2009 Location: USA Posts: 3,819 View My Garage	Man that must have been a tough install if they had to turn your car upside down and sideways to install them!! Looks and sounds great. __________________ Blue Angel is here!! 1SS/RS LS3 M6 IBM

09-01-2009, 01:09 PM	#67
Camar0wn3d formerly "wh0rsep0wer" Drives: 2016 1SS Summit White Join Date: Oct 2008 Location: Myrtle Beach, SC Posts: 489	I have to say that this combination is the best sounding LS3 complete exhaust I have heard yet....I have the LMII and am waiting on my ARH order to get here...If the LMII doesn't do it for me it will be for sale and Borla will be in its place. Beautiful....and thanks for the pics and video! __________________ 2010 1SS/RS - CGM/Gray Interior - M6 (SOLD) Kooks 1 7/8" headers, Solo Mach-X, Vararam. 2012 2LS - Black A6 (SOLD) 2016 1SS Summit White A8

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OK...I'm starting a better V6 exhaust examples thread!!	KMPrenger	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	612	09-06-2024 09:00 AM
Borla Catback Exhaust IN STOCK for 2010 Camaro SS	BMC Performance	V8 Bolt-Ons & Tunes	1	09-16-2009 10:12 PM
BEST PRICES ON BORLA EXHAUST	Gotthat02fire	V8 Bolt-Ons & Tunes	8	08-30-2009 12:37 PM
Check your Order here	bvonscott	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	665	06-29-2009 02:00 PM
5th Gen Camaro LS3 info from Chevy Hi-Po...READ	TAG UR IT	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	295	03-07-2008 11:06 AM

08-31-2009, 12:57 AM	#57
chevyss SS/RS Drives: 2010 SS/RS IOM w/blk stripes A6 Join Date: Jun 2009 Location: Eastern Washington Posts: 816 View My Garage	Sure sounds good. Thanks for sharing.

08-31-2009, 05:07 PM	#60
A.R. Headers Drives: Pontiac G8 GT Join Date: May 2009 Location: new york Posts: 263	Jekyll, With the ARH system installed, installing the Borla axleback is about a 1/2 -45 minute process. Like our system the axleback is designed to work with the factory exhaust. You simply need to cut the pipes leading up to the mufflers, slip them into the mufflers and clamp them up. It's as simple as that. The factory pipes that connect the 2 systems are 409 S/S and will work fine. You'll have to use maybe 16-20 inches of the factory pipe per side. Swift, They hit you pretty hard. The install is 3 hours tops. As far as our gaskets, how about we haven't had a single failure in 4 years. They are manufactured by Flat Out Racing and are graphite. Anyone that says our gaskets are worthless knows not what he's looking at. I apprecite you going with ARH. Enjoy the system. Nick

09-01-2009, 06:54 AM	#63
Jekyll-N-Hyde I put the FU back in FUN Drives: 1969 SS 396 , 2010 Camaro SS Join Date: Jun 2009 Location: Between Weatherford and Azle TX hway730 Posts: 2,129	Ty Swift