What Did You Do To Your Camaro Today? - Page 1082 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Demon War Horse · 12-31-2015, 07:50 PM

Quote:

Originally Posted by Ryanbabz71

Started prepping for the hood vent

Ryan

Can't wait to see this!

evh5150vanhalen · 12-31-2015, 08:00 PM

Photoshop :/
Is it spring yet?

Redrocker1958 · 12-31-2015, 08:04 PM

[QUOTE=Ryanbabz71;8810387]Working up the courage to cut a hole in the hood.

Oh do I ever know what ya mean..took me a week to lay out the holes for upper quater ports.then looked at it for another week b4 I finnaly made that first mark on it..my hoods next..hex vents here I go....

Ace0751 · 12-31-2015, 09:37 PM

Didn't have enough time to wash her before it got cold but she is still clean. Finally prepped her for winter storage, the tender is on and did some cleaning before I put a sheet on the top and called it for the season. I do wish it was spring already but don't feel the depression like I did last winter.

XxScottxXN · 12-31-2015, 10:08 PM

Quote:

Originally Posted by Stroke9

Removed the white and black (2 layers per) inlays and replaced with Inferno Orange ones, then clear coated them and reattached.

** The tape that is showing under the emblem was just for reference for positioning**

Attachment 764358

The SS is upside down!!

Stroke9 · 01-01-2016, 01:34 AM

Quote:

Originally Posted by XxScottxXN

The SS is upside down!!

Yeah right before I put on the 3m backing I turned it right side up. Good eye though!

Spedee · 01-01-2016, 03:35 AM

Installed freshly painted ACS T5 splitter. Now back to storage.

Splat · 01-01-2016, 06:30 AM

Had a Cam installed by JTM Motorsports, and now I'm stretching her legs and loving every min.

Shawno72 · 01-01-2016, 09:11 AM

Took a few last pics of 2015 leaving work

Ryanbabz71 · 01-01-2016, 05:41 PM

Ryan

CCMADONNA · 01-01-2016, 07:31 PM

WOW!!!

That came out great!!!

scandata · 01-01-2016, 07:48 PM

Coated one rim with C.Quartz Dlux. I'm going to see how it works out before doing the other three.
I also used Colonite to clean up and shine my tailpipes.
Lastly, I put on a set of lug locks. My incentive was finding out that my tires (Pirelli P-Zero) are about $550.00 each.

That plus the rims would be about $6,000.00 to replace if they got stolen, and I go to work at 3:00 am, leaving my car in a dimly-lit parking lot.

That_old_guy · 01-01-2016, 11:45 PM

installed a quick drain to my catch can

Gonzo SS · 01-02-2016, 04:52 PM

Plasti Dipped tail light bezels and removed rear bowtie.

12-31-2015, 08:04 PM	#15137
Redrocker1958 Obsessive camaro disorder Drives: 2010 2ss/rs Join Date: Oct 2015 Location: USA. Posts: 943 View My Garage	[QUOTE=Ryanbabz71;8810387]Working up the courage to cut a hole in the hood. Oh do I ever know what ya mean..took me a week to lay out the holes for upper quater ports.then looked at it for another week b4 I finnaly made that first mark on it..my hoods next..hex vents here I go.... Attached Images __________________ 2010 2ss/rs

12-31-2015, 09:37 PM	#15138
Ace0751 GEN5 Detail Drives: 2011 Synergy Series 2SS Convertible Join Date: Sep 2014 Location: Northeast, OH Posts: 1,986	Didn't have enough time to wash her before it got cold but she is still clean. Finally prepped her for winter storage, the tender is on and did some cleaning before I put a sheet on the top and called it for the season. I do wish it was spring already but don't feel the depression like I did last winter. __________________ Roto-Fab CAI, Borla ATAK Exhaust System, Stainless Power Headers, RX Performance Catch Can, ACS T4 Splitter, Oracle side markers, Dyno Tuned by RDP Motorsports

01-01-2016, 06:30 AM	#15142
Splat Drives: 2012 1SS M6 IOM Join Date: Dec 2012 Location: New Rochelle New York Posts: 1,428 View My Garage	Had a Cam installed by JTM Motorsports, and now I'm stretching her legs and loving every min. __________________ 2012 1SS Camaro LS3 Inferno Orange Mods: LSA Supercharger, 2.55 Pulley, Custom Boost Cam, ARH LTH 1 7/8, HFC, 3' Magnaflow Exhaust, JLT CAI, Elite CC V2, BO White Stage 2 TB, GM 3.91 Gears, DSS CF Driveshaft, BMR Bushing Kit.... . Tuned by JTM Motorsports 540 Hp 550Tq on 9PSI Axles, Monster Clutch, Hotchkis TVS Track Pack kit.......For 2018.

01-01-2016, 05:41 PM	#15144
Ryanbabz71 Drives: 2021 ZL1 1LE Satin Steel Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,374 View My Garage	Ryan __________________ Ryan 2021 ZL1 1LE Satin Steel Metallic Build Page: https://www.camaro6.com/forums/showthread.php?t=632481

01-01-2016, 07:31 PM	#15145
CCMADONNA Drives: 2014 SW 2SS/RS Join Date: Jun 2014 Location: So Cal Posts: 1,681 View My Garage	WOW!!! That came out great!!! __________________ 2014 2SS/RS VERT L99 SUMMIT WHITE AIRAID CAI BORLA ATAK CAT-BACK EXHAUST ELITE ENGINEERING CATCH-CAN RANGE AFM-DELETE MODULE HUPER OPTIK 40 CHROME PEDALS PREMIUM FLOOR MATS PREMIUM CARGO MAT DEDICATED 32GB iPHONE HD[/I][/B][IMG][/IMG]

12-31-2015, 08:00 PM	#15136
evh5150vanhalen Drives: 2010 ABM Camaro 2SS Join Date: Oct 2010 Location: Nova Scotia Posts: 167	Photoshop :/ Is it spring yet?

01-01-2016, 03:35 AM	#15141
Spedee Drives: SS Join Date: Dec 2015 Location: Canada Posts: 159	Installed freshly painted ACS T5 splitter. Now back to storage.

01-01-2016, 09:11 AM	#15143
Shawno72 Drives: 2015 Black 2LT RS M6 Join Date: Aug 2015 Location: Cali Posts: 2,033	Took a few last pics of 2015 leaving work

01-01-2016, 07:48 PM	#15146
scandata Drives: 2015 2SS/RS vert, Spring Green Edtn Join Date: Jun 2014 Location: Sarasota, FL Posts: 1,284	Coated one rim with C.Quartz Dlux. I'm going to see how it works out before doing the other three. I also used Colonite to clean up and shine my tailpipes. Lastly, I put on a set of lug locks. My incentive was finding out that my tires (Pirelli P-Zero) are about $550.00 each. That plus the rims would be about $6,000.00 to replace if they got stolen, and I go to work at 3:00 am, leaving my car in a dimly-lit parking lot. __________________ 2015 2SS/RS vert, Spring Edition Green Flash (2015 - present) 2014 1LT vert, Blue Ray Metallic (2014 - 2015)

01-01-2016, 11:45 PM	#15147
That_old_guy Drives: 2016 Jetta sport Join Date: Feb 2015 Location: Virginia Posts: 61	installed a quick drain to my catch can

01-02-2016, 04:52 PM	#15148
Gonzo SS Drives: 2012 IBM 2SS/RS LS3/M6 Join Date: Apr 2015 Location: Atlanta, GA Posts: 354	Plasti Dipped tail light bezels and removed rear bowtie. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM