You are browsing camaro5 
 |
|
11-20-2015, 11:06 PM
|
#1 |
 Drives: '13 2SS 1LE Join Date: Aug 2014
Location: B.C. Canada
Posts: 11
|
D1SC Procharger on LSX block
Have a '13 1LE and over the winter will be building a 416 stroker using an LSX block. Just wanted to make sure that the procharger kit I have now will mount up the exact same. Thank you.
|
|
|
|
11-21-2015, 06:52 AM
|
#2 |
|
Svt lol
Drives: 2011 ss inferno orange blown Join Date: Jan 2012
Location: Topeka
Posts: 2,312
|
Should, every mounting point is universal on the Ls engines except that disaster idea of a ls4 (fwd) they put in the Monte Carlo if I remember correctly.
__________________
plasti dip is not a mod.......and a cold air intake doesn't make you fast!
|
|
|
|
|
11-21-2015, 11:56 AM
|
#3 |
 Drives: 2015 Camaro SS commemorative Join Date: May 2015
Location: Utah
Posts: 426
|
Do a build log. I would be interested to see this. What HP have you hit so far with your setup?
|
|
|
|
|
11-21-2015, 12:05 PM
|
#4 |
|
Sittin side ways
Drives: 2010 2SS/RS IOM Join Date: Nov 2012
Location: Arlington,Tx
Posts: 232
|
Upgrade to a F series head unit. That D1 will run out of steam.
__________________
850+hp club member
Procharger F1-A  |
|
|
|
|
11-21-2015, 12:26 PM
|
#5 |
|
ЯєŧąяĐ Єl¡m¡иąŧøя ™
|
It will mount fine. I wouldn't use a D1 for a 416 though. A F series is more appropriate.
__________________
|
|
|
|
|
11-21-2015, 02:47 PM
|
#6 |
|
USAF retired! Thank God!
Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28 Join Date: Jul 2011
Location: North Texas
Posts: 2,799
|
I had a D1 on my LSX427. The most i could get out of it was 758whp at 14psi. I had one more pulley to go but didnt bother since twins were in the works. Id go F1C to get the most out of your motor.
__________________
 |
|
|
|
|
|
|
|
 |
|
|
