Spoiler Install - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

iPhoneNerd · 12-02-2015, 10:01 AM

Has anybody in the DMV had an aftermarket spoiler installed in their Camaro?

Thanks.

CTSVBiggie · 12-03-2015, 06:34 AM

I installed my maverick man wing. Installed with factory holes and used a little double sided tape.

BluePhoenix · 12-06-2015, 08:27 PM

Aftermarket spoilers are an easy install as long as they use the factory mounting holes.

iPhoneNerd · 12-07-2015, 01:18 PM

Quote:

Originally Posted by BluePhoenix

Aftermarket spoilers are an easy install as long as they use the factory mounting holes.

I have an LS man :( no mounting holes lol

CTSVBiggie · 12-07-2015, 01:38 PM

If I had to have something installed like that. APAC in balitmore maybe?

https://www.facebook.com/Auto-Perfor...64477/?fref=ts

Denis · 12-07-2015, 02:40 PM

Quote:

Originally Posted by iPhoneNerd

I have an LS man :( no mounting holes lol

haha that makes it a little more difficult. Either find a trunk with the holes or measure twice and drill once.

CTSVBiggie · 12-07-2015, 03:15 PM

^measure 1000 times.

iPhoneNerd · 12-07-2015, 03:20 PM

Ok guys so this local shop with pretty good ratings on Yelp is quoting me $100-150 Depending on time it takes, because they charge $100 per hour. Would Y'all consider this price fair for the installation?

CTSVBiggie · 12-07-2015, 04:10 PM

Ive never had it done so hard to say. Some come with templates as well.

That or id get a no drill spoiler that uses double sided tape. My subaru had one on for YEARS. no issues.

Denis · 12-08-2015, 12:34 PM

Quote:

Originally Posted by CTSVBiggie

^measure 1000 times.

haha right

Quote:

Originally Posted by iPhoneNerd

Ok guys so this local shop with pretty good ratings on Yelp is quoting me $100-150 Depending on time it takes, because they charge $100 per hour. Would Y'all consider this price fair for the installation?

ummm, yea I think that's probably fair considering the work. after all the measuring, drilling and actual installation its probably about an hour worth of work.

SilverMike · 12-08-2015, 08:57 PM

I bought a spoiler from an eBay store. The color matched perfectly and I haven't had a problem with the quality. I also have an LS so I had to drill my own holes. The spoiler came with templates and instructions on how/where to drill.

This is the technique I used.

Snoman · 12-09-2015, 07:43 AM

Just make sure to use 3M tape between the spoiler and trunk lid. Do not under any circumstances, bolt the wing directly to the lid. Even if you have a stock wing, pull it off and apply tape, GM has a recall service bulletin to repaint the car because of this.

12-02-2015, 10:01 AM	#1
iPhoneNerd Drives: 2014 Camaro LS V6 Join Date: Dec 2014 Location: Alexandria, VA Posts: 148	Spoiler Install Has anybody in the DMV had an aftermarket spoiler installed in their Camaro? Thanks.

12-03-2015, 06:34 AM	#2
CTSVBiggie Drives: 2013 1LE Join Date: Mar 2013 Location: maryland Posts: 800	I installed my maverick man wing. Installed with factory holes and used a little double sided tape. __________________ >>>>>>>>>>>MUST READ DISCLAIMER<<<<<<<<<<<< 2013 Crystal Red Tint Coat - 2SS RS 1LE

12-06-2015, 08:27 PM	#3
BluePhoenix Drives: 23 Camaro 2SS 1LE Join Date: Jul 2013 Location: Hanover, PA Posts: 3,374	Aftermarket spoilers are an easy install as long as they use the factory mounting holes. __________________ 2023 Camaro 2SS 1LE, A10, Summit White, 1100 - 3/23/2023 2000 - 3/27/2023 3000 - 3/28/2023 3000 - 4/04/2023 — 4/24 TPW 3400 - 4/12/2023 — 4/24 TPW 3800 - 4/28/2023 - Delayed ETA VIN: 1G1FH1R73P0145237 5/10/2023 - ETA 5/27/2023 5000 - 5/30/2023 6000 - 6/3/2023 2024 GMC Sierra 1500

12-07-2015, 01:38 PM	#5
CTSVBiggie Drives: 2013 1LE Join Date: Mar 2013 Location: maryland Posts: 800	If I had to have something installed like that. APAC in balitmore maybe? https://www.facebook.com/Auto-Perfor...64477/?fref=ts __________________ >>>>>>>>>>>MUST READ DISCLAIMER<<<<<<<<<<<< 2013 Crystal Red Tint Coat - 2SS RS 1LE

12-07-2015, 03:15 PM	#7
CTSVBiggie Drives: 2013 1LE Join Date: Mar 2013 Location: maryland Posts: 800	^measure 1000 times. __________________ >>>>>>>>>>>MUST READ DISCLAIMER<<<<<<<<<<<< 2013 Crystal Red Tint Coat - 2SS RS 1LE

12-07-2015, 03:20 PM	#8
iPhoneNerd Drives: 2014 Camaro LS V6 Join Date: Dec 2014 Location: Alexandria, VA Posts: 148	Ok guys so this local shop with pretty good ratings on Yelp is quoting me $100-150 Depending on time it takes, because they charge $100 per hour. Would Y'all consider this price fair for the installation?

12-07-2015, 04:10 PM	#9
CTSVBiggie Drives: 2013 1LE Join Date: Mar 2013 Location: maryland Posts: 800	Ive never had it done so hard to say. Some come with templates as well. That or id get a no drill spoiler that uses double sided tape. My subaru had one on for YEARS. no issues. __________________ >>>>>>>>>>>MUST READ DISCLAIMER<<<<<<<<<<<< 2013 Crystal Red Tint Coat - 2SS RS 1LE

12-09-2015, 07:43 AM	#12
Snoman H-Town Camaro Club Drives: 2013 Dusk Edition 2SS/M6/Sun/NPP Join Date: May 2014 Location: Houston Posts: 2,234 View My Garage	Just make sure to use 3M tape between the spoiler and trunk lid. Do not under any circumstances, bolt the wing directly to the lid. Even if you have a stock wing, pull it off and apply tape, GM has a recall service bulletin to repaint the car because of this.