Need to get rid of a lot of stuff. BUYYYY ITTT - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

AiL762 · 01-02-2016, 12:08 AM

I have too much stuff lying around prior to me getting this camaro, and well I figure I finally have time to start trying to get rid of stuff before I absolutely have to rent out a storage in the very near future. Plus need the money to help pay for all the stuff I ordered.

I'm going to put Camaro parts on the top of the list as well as anything else I notice around like other car parts, guitar or music equipment, gun parts, or whatever. Prices should be reasonable (don't waste each others time), just shoot me a pm with what you offer before shipping costs and I'll send you my paypal info or can pick up locally if available. Pictures will be added or available upon request. as well as additions to whenever I have time to add on here.

Honestly as long as its a reasonable offer I could care less about negotiating to get more from you or what you intend to do with the stuff. Buy it and immediately scrap the materials or sell on ebay. I don't have the time to make full amounts for what I have so take advantage of it if wanted.

Thanks for looking.

2010 Camaro 1SS/RS Parts.

- oem engine cover w/ bracket

- oem window shade pack

- oem center console the one without gauges.

- oem headers with midpipe/catalytic and all good bottom o2 sensors

- oem radiator, cap, and hoses

- oem cam, chain, gear, valve springs stuff

- oem reverse lights

- oem harmonic dampener (is chipped at the edge)

- oem rs package foglight bulbs

- vengeance racing oil breather cap

- oem oil pump (should have the stuck valve, maybe you want to get it rebuilt for cheap?)

-oem thermostat

- oem 6sp shifter, boot and knob

2012 Cadillac CTS

- oem wheels (tires were deflated to get tpms out, no flat spots, good tread still. on one wheel something bad must have spilled on it in storage because it left "water marks" on the finish so it would need to be redone or just paint all to whatever color you want.)

- oem grille

- oem headlights

1990 Mazda Miata Parts:

- oem radiator
- oem a/c
- oem header & midpipe
- oem springs & shocks

- oem headlights

2006 Acura RSX-S Parts:

- Buddy Club Short Shifter (weld snapped, easy fix)

- Ingalls Torque Dampener

- oem acura badges

If anyone is in need for a car I have a 1994 Cadillac Fleetwood brougham in black with black interior w/ ~140k miles that I need to get rid off before I just pretty much give it away to a friend.

maintenance is all up to date and logged. msd cap, rotor coils, and wires. water pump, coolant sensor. NGK iridium spark plugs. new tranny filter and fluid, and diff fluid. engine cleaned w/ mobil1 synthetic oil changes, and gas treatment to clean injectors. short ram intake w/ k&n filter. cross drilled/slotted front rotors hawk pads, and new drums in rear. new pioneer speakers all around. wheel bearings, lower & upper ball joints, and tie rods. New battery. Have have summit racing steelies with fairly new tires (just been sitting a while and also have the oem wheels) as for bad; rebuilt title, leak in the a/c, all windows except driver have broken window guides (i have the new ones just never had time to install), no radio since I pulled it out for a different car (have factory radio just not installed). car is all one color thankfully and not horrible, but def would recommend a paint job if wanted since vinyl top has been removed. car is super comfy, feels like your floating in air, and reliable as it allowed me to go drive multiple states non stop when I was in the Marines to come back home many times and visit family.

Misc stuff. (more added soon)

- Schroth Rallye 4 Racing Harness Belt, Really good condition as shown, no tears or anything. Only the pads which are optional are faded. The Belt is a rich red color, looks incredible in person.

- 17x8.5 JNC 005 5X100 +30 BLACK and GOLD RIVET wheels brand new in box since didnt fit my CTS caliper clearance. (BBS LM copies)

- Borla Hat

- 9005 Nokya Yellow 2500k Bulbs

- Intake check flow Valve

- MAudio Oxygen61 Midi controller/ Keyboard

- XBOX 360 w/ 23 actually good working games, 2 headsets, composite cables, and wired controller

- Asus EEE Transformer Prime 32GB Tablet. Cover and Stylus Pen Included. (Just been sitting around for a few years since I got my laptop, really good condition as shown, few dings from storage)

- Misc. Radio Stuff. (Sony Radio. Factory Fleetwood Boss Speakers. JBL Speakers. Audiobahn Bass Controller. 10" guitar speaker)

like I said, more will be added as time allows or memory comes back to me what I need to get rid off. any questions ask and I will answer.

kangtj · 01-06-2016, 10:21 PM

Pics of the Cold air intake

reddeadg8 · 01-07-2016, 09:22 PM

can you post some pics of the CTS oem wheels

AiL762 · 01-08-2016, 08:45 AM

Quote:

Originally Posted by kangtj

Pics of the Cold air intake

Quote:

Originally Posted by reddeadg8

can you post some pics of the CTS oem wheels

been super busy finishing up my cam and catching up with errands, but I already set them aside along with the rest of the items to get cleaned a little before I snap all the pics. updates will be posted hopefully in a few hours or at least by end of day. (seems like its gonna rain, normal miami weather

)

AiL762 · 01-08-2016, 11:41 AM

bump. some pics are up. will post more when time permits. hopefully sometime today.

AiL762 · 01-08-2016, 03:24 PM

Alright, massive update. Posted pics of almost everything. Still trying to cleanup the storage area to take the pictures of the last stuff and will keep adding anything else I see.

Please do not hesitate to ask questions if have any interest. Tight on money atm and space so really want to get rid of everything asap.

VTSummit · 01-08-2016, 08:15 PM

midi controller price?

AiL762 · 01-13-2016, 06:32 AM

Quote:

Originally Posted by kangtj

Pics of the Cold air intake

Quote:

Originally Posted by reddeadg8

can you post some pics of the CTS oem wheels

Quote:

Originally Posted by VTSummit

midi controller price?

pm'd

AiL762 · 01-14-2016, 03:05 PM

Intake sold.

Bump

Jenner · 01-14-2016, 03:13 PM

How much for the shades?

AiL762 · 01-14-2016, 03:42 PM

Quote:

Originally Posted by Jenner

How much for the shades?

pm'ed

AiL762 · 01-18-2016, 04:43 PM

bump, going to take a lot of things to the scrap yard if no one wants to claim it..

AiL762 · 01-25-2016, 10:17 PM

Quote:

Originally Posted by AiL762

bump, going to take a lot of things to the scrap yard if no one wants to claim it..

this. probably going sometime this week...

01-02-2016, 12:08 AM	#1
AiL762 Drives: 2010 Camaro SS (LS3) Join Date: Dec 2015 Location: MIA Posts: 60	Need to get rid of a lot of stuff. BUYYYY ITTT I have too much stuff lying around prior to me getting this camaro, and well I figure I finally have time to start trying to get rid of stuff before I absolutely have to rent out a storage in the very near future. Plus need the money to help pay for all the stuff I ordered. I'm going to put Camaro parts on the top of the list as well as anything else I notice around like other car parts, guitar or music equipment, gun parts, or whatever. Prices should be reasonable (don't waste each others time), just shoot me a pm with what you offer before shipping costs and I'll send you my paypal info or can pick up locally if available. Pictures will be added or available upon request. as well as additions to whenever I have time to add on here. Honestly as long as its a reasonable offer I could care less about negotiating to get more from you or what you intend to do with the stuff. Buy it and immediately scrap the materials or sell on ebay. I don't have the time to make full amounts for what I have so take advantage of it if wanted. Thanks for looking. 2010 Camaro 1SS/RS Parts. - oem engine cover w/ bracket - oem window shade pack - oem center console the one without gauges. - oem headers with midpipe/catalytic and all good bottom o2 sensors - oem radiator, cap, and hoses - oem cam, chain, gear, valve springs stuff - oem reverse lights - oem harmonic dampener (is chipped at the edge) - oem rs package foglight bulbs - vengeance racing oil breather cap - oem oil pump (should have the stuck valve, maybe you want to get it rebuilt for cheap?) -oem thermostat - oem 6sp shifter, boot and knob 2012 Cadillac CTS - oem wheels (tires were deflated to get tpms out, no flat spots, good tread still. on one wheel something bad must have spilled on it in storage because it left "water marks" on the finish so it would need to be redone or just paint all to whatever color you want.) - oem grille - oem headlights 1990 Mazda Miata Parts: - oem radiator - oem a/c - oem header & midpipe - oem springs & shocks - oem headlights 2006 Acura RSX-S Parts: - Buddy Club Short Shifter (weld snapped, easy fix) - Ingalls Torque Dampener - oem acura badges If anyone is in need for a car I have a 1994 Cadillac Fleetwood brougham in black with black interior w/ ~140k miles that I need to get rid off before I just pretty much give it away to a friend. maintenance is all up to date and logged. msd cap, rotor coils, and wires. water pump, coolant sensor. NGK iridium spark plugs. new tranny filter and fluid, and diff fluid. engine cleaned w/ mobil1 synthetic oil changes, and gas treatment to clean injectors. short ram intake w/ k&n filter. cross drilled/slotted front rotors hawk pads, and new drums in rear. new pioneer speakers all around. wheel bearings, lower & upper ball joints, and tie rods. New battery. Have have summit racing steelies with fairly new tires (just been sitting a while and also have the oem wheels) as for bad; rebuilt title, leak in the a/c, all windows except driver have broken window guides (i have the new ones just never had time to install), no radio since I pulled it out for a different car (have factory radio just not installed). car is all one color thankfully and not horrible, but def would recommend a paint job if wanted since vinyl top has been removed. car is super comfy, feels like your floating in air, and reliable as it allowed me to go drive multiple states non stop when I was in the Marines to come back home many times and visit family. Misc stuff. (more added soon) - Schroth Rallye 4 Racing Harness Belt, Really good condition as shown, no tears or anything. Only the pads which are optional are faded. The Belt is a rich red color, looks incredible in person. - 17x8.5 JNC 005 5X100 +30 BLACK and GOLD RIVET wheels brand new in box since didnt fit my CTS caliper clearance. (BBS LM copies) - Borla Hat - 9005 Nokya Yellow 2500k Bulbs - Intake check flow Valve - MAudio Oxygen61 Midi controller/ Keyboard - XBOX 360 w/ 23 actually good working games, 2 headsets, composite cables, and wired controller - Asus EEE Transformer Prime 32GB Tablet. Cover and Stylus Pen Included. (Just been sitting around for a few years since I got my laptop, really good condition as shown, few dings from storage) - Misc. Radio Stuff. (Sony Radio. Factory Fleetwood Boss Speakers. JBL Speakers. Audiobahn Bass Controller. 10" guitar speaker) like I said, more will be added as time allows or memory comes back to me what I need to get rid off. any questions ask and I will answer. Last edited by AiL762; 01-14-2016 at 03:05 PM.

01-08-2016, 08:15 PM	#7
VTSummit Consistently inconsistent Drives: 2015 2LT Summit White Join Date: May 2015 Location: United States Posts: 1,363	midi controller price? __________________ Thanks to MRR, I have some SWEET wheels! Thank you! 2015 2LT Ported TB, Ported intake, JACFAB intake spacer, Borla exhaust, IPF 91 tune, Complete 1/LE suspension, Brembo brakes, Goodridge lines, Elite catch can, CAI with Thermo-wrap, 275/40-20 x 10's all around, Z/28 spoiler, GM splitter, Alpine/Polk stereo with AudiControl interface.

01-06-2016, 10:21 PM	#2
kangtj Drives: 2010 camaro 2ss Join Date: Jan 2016 Location: jacksonville fl Posts: 6	Pics of the Cold air intake

01-07-2016, 09:22 PM	#3
reddeadg8 Drives: Depends on the day Join Date: Oct 2014 Location: Florida Posts: 50	can you post some pics of the CTS oem wheels

01-08-2016, 11:41 AM	#5
AiL762 Drives: 2010 Camaro SS (LS3) Join Date: Dec 2015 Location: MIA Posts: 60	bump. some pics are up. will post more when time permits. hopefully sometime today.

01-08-2016, 03:24 PM	#6
AiL762 Drives: 2010 Camaro SS (LS3) Join Date: Dec 2015 Location: MIA Posts: 60	Alright, massive update. Posted pics of almost everything. Still trying to cleanup the storage area to take the pictures of the last stuff and will keep adding anything else I see. Please do not hesitate to ask questions if have any interest. Tight on money atm and space so really want to get rid of everything asap.

01-14-2016, 03:05 PM	#9
AiL762 Drives: 2010 Camaro SS (LS3) Join Date: Dec 2015 Location: MIA Posts: 60	Intake sold. Bump

01-14-2016, 03:13 PM	#10
Jenner Drives: 2012 SS/RS Join Date: Jul 2013 Location: Placentia, CA Posts: 2,130	How much for the shades?

01-18-2016, 04:43 PM	#12
AiL762 Drives: 2010 Camaro SS (LS3) Join Date: Dec 2015 Location: MIA Posts: 60	bump, going to take a lot of things to the scrap yard if no one wants to claim it..