01-06-2016, 08:16 PM | #15 |
Drive Fast Take Chances
|
I hear you. I got 3.91 with G-force 1000hp and aluminum driveshaft. Just want to stop the vibration
Sent from my iPhone using Tapatalk
__________________
2012 45th Ls3 M6:ECS 1500, Custom Cam ,Alky Meth kit, Mcleod Rxt, MGW shifter,Pfadt Tri-y headers Solo Mach X, 20%tint,3.91 gears ,Suspension upgrades, G-force axles.700 RWHP
http://www.slowhawkperformance.com/ |
01-06-2016, 08:30 PM | #16 |
Drives: 2010 Camaro SS Join Date: Oct 2013
Location: Saskatoon SK Can. Eh
Posts: 365
|
When does the vibration happen? Clutch in and out? Speed related or RPM?
I really don't thing the axle is the issue. My old setup did the same wobble but caused no ill effects other than the seal weeped slightly.
__________________
2010 Camaro SS RS, Maggie with 3.4" pulley, 60# injectors, ADM dual fuel pumps, ADM Stage 2 Cam with Brian Tooley springs and pushrods, black CAI intake, Stainless Works long tube headers w/gutted cats, ZL1 Diff w/offset bushings, Pfadt lowering springs, Pfadt sway bars, Pfadt solid sub frame mounts, BMR trailing arms and toe rods, Hurst short throw shifter, Painted on Hugger Orange stripes, Forgestar F14 Piano Black wheels, Nitto NT05 rubber.
|
01-06-2016, 08:32 PM | #17 |
Drive Fast Take Chances
|
The vibration happens when the car is under a load. Generally over 40 mph. Push the clutch in or let off the gas vibration goes away.
Sent from my iPhone using Tapatalk
__________________
2012 45th Ls3 M6:ECS 1500, Custom Cam ,Alky Meth kit, Mcleod Rxt, MGW shifter,Pfadt Tri-y headers Solo Mach X, 20%tint,3.91 gears ,Suspension upgrades, G-force axles.700 RWHP
http://www.slowhawkperformance.com/ |
01-06-2016, 08:38 PM | #18 |
Drives: 2010 Camaro SS Join Date: Oct 2013
Location: Saskatoon SK Can. Eh
Posts: 365
|
That does sound like driveshaft or axle. Exhaust shake?
__________________
2010 Camaro SS RS, Maggie with 3.4" pulley, 60# injectors, ADM dual fuel pumps, ADM Stage 2 Cam with Brian Tooley springs and pushrods, black CAI intake, Stainless Works long tube headers w/gutted cats, ZL1 Diff w/offset bushings, Pfadt lowering springs, Pfadt sway bars, Pfadt solid sub frame mounts, BMR trailing arms and toe rods, Hurst short throw shifter, Painted on Hugger Orange stripes, Forgestar F14 Piano Black wheels, Nitto NT05 rubber.
|
01-06-2016, 08:43 PM | #19 |
Drive Fast Take Chances
|
No exhaust does not shake. I put a wrench on every nut and bolt under there the other day. Replaced the OE driveshaft with 1 piece aluminum from Dynatech. Tires balanced and alignment done.
Sent from my iPhone using Tapatalk
__________________
2012 45th Ls3 M6:ECS 1500, Custom Cam ,Alky Meth kit, Mcleod Rxt, MGW shifter,Pfadt Tri-y headers Solo Mach X, 20%tint,3.91 gears ,Suspension upgrades, G-force axles.700 RWHP
http://www.slowhawkperformance.com/ |
01-06-2016, 09:01 PM | #20 |
Drives: 2010 Camaro SS Join Date: Oct 2013
Location: Saskatoon SK Can. Eh
Posts: 365
|
Down to the axles then. Put the originals on see what happens.
__________________
2010 Camaro SS RS, Maggie with 3.4" pulley, 60# injectors, ADM dual fuel pumps, ADM Stage 2 Cam with Brian Tooley springs and pushrods, black CAI intake, Stainless Works long tube headers w/gutted cats, ZL1 Diff w/offset bushings, Pfadt lowering springs, Pfadt sway bars, Pfadt solid sub frame mounts, BMR trailing arms and toe rods, Hurst short throw shifter, Painted on Hugger Orange stripes, Forgestar F14 Piano Black wheels, Nitto NT05 rubber.
|
01-06-2016, 09:07 PM | #21 |
Drive Fast Take Chances
|
I snapped my passenger side that's why I replaced them.
Sent from my iPhone using Tapatalk
__________________
2012 45th Ls3 M6:ECS 1500, Custom Cam ,Alky Meth kit, Mcleod Rxt, MGW shifter,Pfadt Tri-y headers Solo Mach X, 20%tint,3.91 gears ,Suspension upgrades, G-force axles.700 RWHP
http://www.slowhawkperformance.com/ |
01-06-2016, 10:24 PM | #22 |
Drives: 2010 Camaro SS Join Date: Oct 2013
Location: Saskatoon SK Can. Eh
Posts: 365
|
Shouldn't be too hard to find another stocker.
__________________
2010 Camaro SS RS, Maggie with 3.4" pulley, 60# injectors, ADM dual fuel pumps, ADM Stage 2 Cam with Brian Tooley springs and pushrods, black CAI intake, Stainless Works long tube headers w/gutted cats, ZL1 Diff w/offset bushings, Pfadt lowering springs, Pfadt sway bars, Pfadt solid sub frame mounts, BMR trailing arms and toe rods, Hurst short throw shifter, Painted on Hugger Orange stripes, Forgestar F14 Piano Black wheels, Nitto NT05 rubber.
|
01-07-2016, 12:48 PM | #23 |
Drives: own more cars than i can list Join Date: Nov 2010
Location: Charlotte NC
Posts: 1,124
|
|
01-07-2016, 02:16 PM | #24 |
Drive Fast Take Chances
|
Ok thanks
Sent from my iPhone using Tapatalk
__________________
2012 45th Ls3 M6:ECS 1500, Custom Cam ,Alky Meth kit, Mcleod Rxt, MGW shifter,Pfadt Tri-y headers Solo Mach X, 20%tint,3.91 gears ,Suspension upgrades, G-force axles.700 RWHP
http://www.slowhawkperformance.com/ |
01-17-2016, 05:05 PM | #25 |
Drives: 05 GTO Join Date: Jul 2009
Location: Wichita, KS
Posts: 1,243
|
Since these are our axles we would be glad to help. Give us a call and we can tell you what they should measure or if you want just send them in and we can go over all the critical dimensions to see if its something with the stubs.
|
01-17-2016, 05:08 PM | #26 |
Drive Fast Take Chances
|
We exchanged emails about this, I haven't gotten around to removing them yet. Thank you. Also do you think it might be the differential bearings?
Sent from my iPhone using Tapatalk
__________________
2012 45th Ls3 M6:ECS 1500, Custom Cam ,Alky Meth kit, Mcleod Rxt, MGW shifter,Pfadt Tri-y headers Solo Mach X, 20%tint,3.91 gears ,Suspension upgrades, G-force axles.700 RWHP
http://www.slowhawkperformance.com/ |
01-17-2016, 05:26 PM | #27 | |
Drives: 05 GTO Join Date: Jul 2009
Location: Wichita, KS
Posts: 1,243
|
Quote:
How about you send the axles in and we can inspect them just to make sure the inner stubs are to spec or maybe a cv joint needs rebuilt. |
|
01-17-2016, 05:27 PM | #28 |
Drive Fast Take Chances
|
Should I just send the one side that has up and down movement or both
Sent from my iPhone using Tapatalk
__________________
2012 45th Ls3 M6:ECS 1500, Custom Cam ,Alky Meth kit, Mcleod Rxt, MGW shifter,Pfadt Tri-y headers Solo Mach X, 20%tint,3.91 gears ,Suspension upgrades, G-force axles.700 RWHP
http://www.slowhawkperformance.com/ |
|
|
|
|