01-12-2016, 11:52 PM | #1 |
Drives: 2012 SIM Camaro 2SS/RS , 2010 Tahoe Join Date: Jun 2008
Location: somewhere beyond
Posts: 390
|
D1S led conversion
Hello , i saw these on Amazon and they have the same bulb size as our rs headlight and I'm seeking experts advise before I pull the trigger on them , any reason that won't make them work ? ( want them cause they don't worm up unlike the hid)
Thanks !
__________________
2012 2SS/RS silver ice metallic camaro
|
01-13-2016, 04:14 PM | #2 |
BUMBL Z
|
Definitely interested to see how these work
__________________
Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP
Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
01-13-2016, 05:00 PM | #3 |
Drives: 2016 1SS Join Date: Apr 2012
Location: Houston, TX
Posts: 3,829
|
Interesting...
I dont see a problem since you will just get the power signal from the factory connector. I would not use any HID parts, so the ballast would just stay in place. Other then that do see an issue. Thank you, Ricardo |
01-13-2016, 06:07 PM | #4 |
Drives: 2010 Camaro 1SS Join Date: Nov 2015
Location: CA
Posts: 360
|
I have LED headlights and they look great. http://www.amazon.com/OPT7-Headlight...ywords=h13+LED
The one's I got don't have the same Wattage as yours. btw. Sig pic is from before I installed those.
__________________
|
01-13-2016, 08:44 PM | #5 |
Drives: 2013 VR vert ZL1 Join Date: Aug 2012
Location: Los Angeles
Posts: 1,495
|
Will these increase the output and overall brightness compared to the stock rs light outpus?
Sent from my Nexus 5 using Tapatalk |
01-15-2016, 07:16 AM | #6 |
Drives: 2016 Bright Yellow Camaro vert Join Date: Jul 2015
Location: Phoenix, AZ
Posts: 67
|
LED Headlights?
Well I've tried two different sets. First set was flat with Low beam LED on Top and High beam on bottom. Can't say I was a fan... Problem is stock LT reflectors (non RS) are designed for a filament that shines 360 degrees. The LED while brighter on low beam only uses something less than 180 degrees. I wasn't happy with the pattern at all. I just bought a set of diamond shape LED's last night (two low beam and two high beam Leds on each bulb) it looks better but the jury is out until I have time to align them on a dark road I like the 5/6000 K light. I like the way they snap on similar to a HID. Just not sure about beam pattern and glare to oncoming drivers....
|
|
|
|
|