nitrous (and cam) install too high? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jordanp · 01-13-2016, 06:04 PM

So i have a 13 L99 and I'd be going with the 150shot 90mm plate system, LNC 2000, a purge kit to spray out of the hood vent, and bottle warmer will be $1000 for install. plus $400-500 for just the PSN-1 Gauge "it'll be a little costly to install because it hooks into so many places." i was expecting it to be much cheaper from what i was reading on here. i originally was just doing a GPI vvt cam, stall and trans cooler with them and for that would be 1400 for the cam, 350 for the stall, 150 for the trans cooler and 400 for the tune; but now i'm looking to do both. so i just feel like it's a high? i believe there rate is $100 an hour idk. any help is appreciated, thanks.

damian559 · 01-14-2016, 02:53 AM

Wow, that's expensive. I got my nitrous installed this week and I have the same exact gauge and it was $800 to install everything. My cam, springs, and push rods installation was $650.

This is everything I had them do.

-Nitrous Outlet Single Fogger Kit
-Nitrous Outlet 10lb Bottle
-Nitrous Outlet Remote Bottle Opener
-Nitrous Outlet Switch Panel
-Nitrous Outlet Heated Billet Bottle Bracket
-Nitrous Outlet "Big Show" Purge Kit
-Nitrous Outlet Fuel Line Crossover
-Lingenfelter LNC-2000
-NOS Window Switch
-Innovate PSN-1 AFR/Bottle Pressure Gauge
-SLP Single Gauge Pod
-NGK BR7EF Plugs

ccb1975 · 01-14-2016, 06:18 AM

Quote:

Originally Posted by damian559

Wow, that's expensive. I got my nitrous installed this week and I have the same exact gauge and it was $800 to install everything. My cam, springs, and push rods installation was $650.

This is everything I had them do.

-Nitrous Outlet Single Fogger Kit
-Nitrous Outlet 10lb Bottle
-Nitrous Outlet Remote Bottle Opener
-Nitrous Outlet Switch Panel
-Nitrous Outlet Heated Billet Bottle Bracket
-Nitrous Outlet "Big Show" Purge Kit
-Nitrous Outlet Fuel Line Crossover
-Lingenfelter LNC-2000
-NOS Window Switch
-Innovate PSN-1 AFR/Bottle Pressure Gauge
-SLP Single Gauge Pod
-NGK BR7EF Plugs

how much for you kit?

Joseph1LE · 01-14-2016, 06:36 AM

Yeah that's a little steep... $1000 including the gauge install is the most I'd even consider if I paid people to work on my car.

flyer08 · 01-14-2016, 08:35 AM

I was quoted at $750 for nitrous install

jordanp · 01-14-2016, 11:01 AM

Thanks guys, that's what i thought. 800 sounds a lot better. ill see if they'll come down, if not i'm going somewhere else

ytown87 · 01-15-2016, 05:21 PM

had a buddy get quoted to do a nitrous install from a major shop in the Tampa area $2000!!!!! Crazy thing is the two of us already did 75% of the install. Just stuck on the wiring for the switch panel he has everything going to for his opener, heater, etc. Called another really big shop in the area and they only quoted him $500 for the install and dyno time. We already put in the LNC2000 so there is no tuning needed.

jordanp · 01-16-2016, 07:25 PM

Quote:

Originally Posted by ytown87

had a buddy get quoted to do a nitrous install from a major shop in the Tampa area $2000!!!!! Crazy thing is the two of us already did 75% of the install. Just stuck on the wiring for the switch panel he has everything going to for his opener, heater, etc. Called another really big shop in the area and they only quoted him $500 for the install and dyno time. We already put in the LNC2000 so there is no tuning needed.

oh wow thats ridiculous for 2k. still waiting to hear back from a different shop, so idk what i'm gunna do yet. hopefully it's reasonable.

Slowhawk · 01-18-2016, 03:42 PM

I believe $1k. Takes a lot of time to run all the wires neatly,nitrous stuff ect. $1k is kinda on the cheap side.

01-13-2016, 06:04 PM	#1
jordanp Drives: Victory Red 2013 SS L99 Join Date: Dec 2013 Location: Raleigh, NC Posts: 41	nitrous (and cam) install too high? So i have a 13 L99 and I'd be going with the 150shot 90mm plate system, LNC 2000, a purge kit to spray out of the hood vent, and bottle warmer will be $1000 for install. plus $400-500 for just the PSN-1 Gauge "it'll be a little costly to install because it hooks into so many places." i was expecting it to be much cheaper from what i was reading on here. i originally was just doing a GPI vvt cam, stall and trans cooler with them and for that would be 1400 for the cam, 350 for the stall, 150 for the trans cooler and 400 for the tune; but now i'm looking to do both. so i just feel like it's a high? i believe there rate is $100 an hour idk. any help is appreciated, thanks. __________________ VR 2013 L99: CAI's Intake, Borla S-type Catback, Kooks 1 7/8th Catted LTs, GPI Heads & SS3 VVT cam, Circle D tripple 3600 stall, NoWeeds Diverters. Last edited by jordanp; 01-13-2016 at 08:49 PM.

01-14-2016, 02:53 AM	#2
damian559 Drives: 2015 1SS, 1LE, Recaro, NPP Join Date: Apr 2014 Location: Fresno, CA Posts: 927	Wow, that's expensive. I got my nitrous installed this week and I have the same exact gauge and it was $800 to install everything. My cam, springs, and push rods installation was $650. This is everything I had them do. -Nitrous Outlet Single Fogger Kit -Nitrous Outlet 10lb Bottle -Nitrous Outlet Remote Bottle Opener -Nitrous Outlet Switch Panel -Nitrous Outlet Heated Billet Bottle Bracket -Nitrous Outlet "Big Show" Purge Kit -Nitrous Outlet Fuel Line Crossover -Lingenfelter LNC-2000 -NOS Window Switch -Innovate PSN-1 AFR/Bottle Pressure Gauge -SLP Single Gauge Pod -NGK BR7EF Plugs __________________ 2015 Summit White 1SS, 1LE, Recaros, NPP 498 RWHP 447 RWTQ (Motor) 647 RWHP 723 RWTQ (150 Shot) 12.1 @ 117 (Motor) 11.7 @ 129 (Nitrous) Nitrous Outlet Single Nozzle Kit \| Stand Alone Fuel Cell w/ C16 \| Custom Grind Cam \| Stainless Power 1 7/8 LT Headers \| CAI Intake \| ATI Super Damper \| BMR Trailing Arms & Toe Links \| Prothane Polyurethane Sub-frame Bushings \| JDP Upper Control Arm Bushings \| MT Drag Radials \| Tuned by SS Motorsports Youtube Channel: Click Here

01-14-2016, 06:36 AM	#4
Joseph1LE Drives: 2015 Camaro SS 1LE, 2001 Camaro SS Join Date: Jun 2015 Location: Miami Posts: 836	Yeah that's a little steep... $1000 including the gauge install is the most I'd even consider if I paid people to work on my car. __________________ 2017 GMC Canyon All Terrain- daily driver/dirt bike hauler 2015 Camaro SS 1LE- sold 2001 Camaro SS SOM M6- sold 1999 Firebird Formula A4- sold

01-14-2016, 11:01 AM	#6
jordanp Drives: Victory Red 2013 SS L99 Join Date: Dec 2013 Location: Raleigh, NC Posts: 41	Thanks guys, that's what i thought. 800 sounds a lot better. ill see if they'll come down, if not i'm going somewhere else __________________ VR 2013 L99: CAI's Intake, Borla S-type Catback, Kooks 1 7/8th Catted LTs, GPI Heads & SS3 VVT cam, Circle D tripple 3600 stall, NoWeeds Diverters.

01-15-2016, 05:21 PM	#7
ytown87 Drives: C6 Corvette Join Date: Sep 2013 Location: Tampa, FL Posts: 1,264	had a buddy get quoted to do a nitrous install from a major shop in the Tampa area $2000!!!!! Crazy thing is the two of us already did 75% of the install. Just stuck on the wiring for the switch panel he has everything going to for his opener, heater, etc. Called another really big shop in the area and they only quoted him $500 for the install and dyno time. We already put in the LNC2000 so there is no tuning needed. __________________ 2008 C6 m6. Carbon creations front/rear carbon fiber wodebody fenders. Carbon fiber hood carbon fiber roof hoop carbon fiber zr1 extreme spoiler. NW 102mm tb. Ported intake manifold. Cometic .040 head gaskets. LG motorsports G6x3 cam. DSX flex fuel sensor. AEM methanol kit. Z06 brakes. Ebiach sway bars. ZR1 rep wheels and Nitto Invo tires. Monster stage 3 twin disc clutch. MGW short shifter. Corbeau race seats. Gforce race harnesses. SLP loudmouth 2 mufflers. Carbon fiber exhaust tips. RPM stage 4 transmission and Stage 3 rear diff. 3.73 gears. Vararam cai. Kooks 1 7/8 headers and x-pipe.

01-14-2016, 08:35 AM	#5
flyer08 Account Suspended Drives: 2010 2SS/RS Join Date: Jun 2009 Location: Texas Posts: 3,418	I was quoted at $750 for nitrous install

01-18-2016, 03:42 PM	#9
Slowhawk Drives: 1999 Trans Am Join Date: Jul 2009 Location: Bridgewater,Ma Posts: 2,018	I believe $1k. Takes a lot of time to run all the wires neatly,nitrous stuff ect. $1k is kinda on the cheap side.