Help with Parts and Tuning Vendors Welcome - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SSawdusty · 01-21-2016, 06:38 PM

Here is a description of my car and its current mods as well as parts I already have and parts I wish to purchase. Just looking for a vendor that can give me a price as well as email tuning for this setup. Also looking for suggestions on what size SC pulley I can safely run after all is said and done.

Current setup:
2010 Camaro SS LS3 with Whipple SC with 3.875 pulley. MSD BAP. ZR1 MAP Sensor. ADM CAI & Scoop. Vmax Ported Throttle Body. Ceramic Coated LG Motorsports Super Pro Headers and Mufflers. Cat Delete.

Current parts on hand to install:
ID 850 injectors. ATI Super Damper with 6% Overdrive & 10 rib pulley system. DSS 1000hp driveshaft and axles.

Parts I'm wanting to purchase

Alky Control - Methanol Injection System - 2010-2015 Camaro - AK-10Cam-Kit. Single Nozzle, GM IAT Sensor Upgrade, AIS 4 Gallon Tank W/Retrofit.

BTR –PDS Stage III 3-Bolt Camshaft or similar specs
Trunnion Upgrade Kit
Valve Spring Kit
Pushrods
3-Bolt Cam Conversion
Timing Chain and Tensioner
ZL1/ADM Fuel module or LPE High output fuel system
Melling - High Pressure/Standard Volume Oil Pump - MEL-10295

As well all the gaskets and bolts required. I know most of this stuff come in a cam kit but you get the point.
Better suggestions are welcome too.

01-21-2016, 06:38 PM	#1
SSawdusty Crewel Jewel Drives: RJT-2SS-RS-6M Join Date: Nov 2009 Location: Nanaimo, BC Posts: 426	Help with Parts and Tuning Vendors Welcome Here is a description of my car and its current mods as well as parts I already have and parts I wish to purchase. Just looking for a vendor that can give me a price as well as email tuning for this setup. Also looking for suggestions on what size SC pulley I can safely run after all is said and done. Current setup: 2010 Camaro SS LS3 with Whipple SC with 3.875 pulley. MSD BAP. ZR1 MAP Sensor. ADM CAI & Scoop. Vmax Ported Throttle Body. Ceramic Coated LG Motorsports Super Pro Headers and Mufflers. Cat Delete. Current parts on hand to install: ID 850 injectors. ATI Super Damper with 6% Overdrive & 10 rib pulley system. DSS 1000hp driveshaft and axles. Parts I'm wanting to purchase Alky Control - Methanol Injection System - 2010-2015 Camaro - AK-10Cam-Kit. Single Nozzle, GM IAT Sensor Upgrade, AIS 4 Gallon Tank W/Retrofit. BTR –PDS Stage III 3-Bolt Camshaft or similar specs Trunnion Upgrade Kit Valve Spring Kit Pushrods 3-Bolt Cam Conversion Timing Chain and Tensioner ZL1/ADM Fuel module or LPE High output fuel system Melling - High Pressure/Standard Volume Oil Pump - MEL-10295 As well all the gaskets and bolts required. I know most of this stuff come in a cam kit but you get the point. Better suggestions are welcome too.