12-23-2015, 10:50 AM | #169 |
Drives: 2015 ZL1 Blue Velvet Metallic Join Date: Mar 2015
Location: Melbourne, FL
Posts: 720
|
Why don't dyno sheets ever display the Y axis in time?
__________________
Roto-Fab CAI, ARH LT, SW 3" catback, JRE tune, Elite-2 CC, VMAX TB, Big Gulp, WW II relo, Lingenfelter S/C reservoir
|
01-04-2016, 06:24 PM | #170 |
Drives: 2015 zl1 Join Date: Nov 2015
Location: USA
Posts: 77
|
This one above pzapp is done in time I was trying to understand how it was making power till almost 7k. no overlay for before after which would be what you would want to see the power and time performance differences.
|
01-21-2016, 12:34 PM | #171 | |
Drives: '12 ZR1 Join Date: Jul 2010
Location: TN
Posts: 1,200
|
Just off the dyno late yesterday
|
|
01-21-2016, 12:50 PM | #172 | |
Drives: 2015 ZL1 Blue Velvet Metallic Join Date: Mar 2015
Location: Melbourne, FL
Posts: 720
|
Quote:
I wonder how long it would take in my car to get from 2K rpm to redline in 4th gear. Might be something fun to try.
__________________
Roto-Fab CAI, ARH LT, SW 3" catback, JRE tune, Elite-2 CC, VMAX TB, Big Gulp, WW II relo, Lingenfelter S/C reservoir
|
|
01-30-2016, 10:30 AM | #173 | |
Drives: 2013 Black ZL1 Join Date: Nov 2015
Location: Ky
Posts: 84
|
Quote:
__________________
|
|
02-01-2016, 10:57 PM | #174 |
Drives: 2015 zl1 Join Date: Nov 2015
Location: USA
Posts: 77
|
15 bone stock m6 zl1 700 miles
Base run before rotofab and e85! Thanks to deticated in Austin tx! http://www.dedicatedmotorsports.com |
07-18-2016, 06:35 PM | #175 |
Drives: 2013 ZL1 A6 #7860 Join Date: Apr 2014
Location: CO, USA
Posts: 1,279
|
763whp, 737wtq
2013 ZL1 A6, Stock Heads and Bottom End, BTR Stage 3 PD Cam, 9.55"/2.55" Pulleys, Ported Blower and Snout, 102mm Throttle Body, CAI, 2" Long Tube Headers, Full 3" Exhaust, DSX Auxiliary Fuel System and Flex Fuel Sensor, ID1300 Injectors, DSX Tuning, DMS Fuel Filter, Chiller and Heat Exchanger, E85 (75% Ethanol). Same Dyno as Above^^^ DSX and DMS http://www.dedicatedmotorsports.com/ Last edited by 2013 ZL1 #7860; 07-19-2016 at 06:45 PM. |
07-30-2016, 08:38 PM | #176 |
Stock Dyno Pull
I could live with the 463.3 Tq but the hp looks to be 40 to 50 low at 442.6.
Sheet attached successfully finally. What do you folks think about the numbers?
__________________
John & Natalie Boyd
2010 Camaro 2SS/RS Silver Ice Met L99/Auto Build Date 6/29/2009 Last edited by HammerZL1; 07-30-2016 at 11:38 PM. |
|
08-04-2016, 10:00 AM | #177 |
Drives: 2019 ZL1 1LE A10 Join Date: Jan 2015
Location: The ATX
Posts: 966
|
New Dyno
Well the car feels great on the street even in 100+ degree heat.
The setup looks like this: AGP Turbo Kit 58/62 DBB Turbos w/the street fmic LME LSA Darton sleeves, Callies Rods, Diamond Pistons 10:1 compression Fore Fuel System / Flex Fuel Spec ST Clutch The Turbo's are maxed out at this point but I'm 100% ok with that for a few years as the car is near bullet proof with this setup and I can really enjoy it on the street. The turbo system allows me to turn the power down to 675 rwhp all the way up to 1000 rwhp which is great. Thanks to Advanced Modern Performance for working on the ZL1, not really their cup of tea as they focus on the C6 and C7 platforms but made an exception for me due to past history. They did a lot of extra work in the engine bay, customized a big oil cooler to help with engine longevity and a bunch of other little things that only a good shop knows to do on a high hp car. Very happy with the build!
__________________
Ryker #29
2019 ZL1 1LE A10 2015 Z/28 #809 |
08-04-2016, 10:42 PM | #178 |
Drives: Fast Join Date: Mar 2015
Location: Michigan
Posts: 3,696
|
Both are low, TQ and HP. On a dynojet with a manual trans car I'd expect no less than 490 for both numbers.
|
08-18-2016, 02:45 PM | #179 |
Go Cougs!
|
My best was 507hp with 493tq. Not sure why the guy printed this sheet off for me. It was a fun day and any ls based motor was $50 for 3 pulls. My car is a stock M6. 4th gear pull.
https://youtu.be/VPchVazm00M Last edited by himmy33; 08-19-2016 at 09:37 AM. |
08-18-2016, 03:41 PM | #180 | |
Quote:
Also probably didn't have all the nannies off, didn't know about that at the time I ran it.
__________________
John & Natalie Boyd
2010 Camaro 2SS/RS Silver Ice Met L99/Auto Build Date 6/29/2009 Last edited by HammerZL1; 10-25-2016 at 09:58 AM. Reason: Added nanies of statement. |
||
08-23-2016, 03:30 AM | #181 |
Go Cougs!
|
How the heck do I put a youtube video on this dang thread?
|
08-23-2016, 07:25 AM | #182 |
709 RWHP & 677 RWTQ
Drives: 13' HPE 800 ZL1..... IOM vert, M6 Join Date: Feb 2013
Location: South Windsor, CT
Posts: 1,140
|
[ u2b ] put the you tube file # here [ /u2b ]
But with no spaces anywhere!! All one line, again no spaces!!
__________________
11.34 @ 124.88
|
|
|
|
|