You are browsing camaro5 
 |
|
01-20-2016, 12:51 PM
|
#1 |
 Drives: 2012 camaro Join Date: Nov 2015
Location: flower mound Tx.
Posts: 65
|
2016 SS Brembo Takeoffs
Hey guys,
I have 2 front calipers with pads, rotors, and backing plates. The caliper part #'s are 23399518 and 23399517. Backing plates are 22802366 and 22802367. The calipers have some very minute imperfections from removal that I don't think you will see much once mounted but just wanna put it out there for you perfectionists who will probably powder coat them anyway. Take a good look at the pics as these are very minor. I'm asking $425 local pickup. I will ship within the U.S. but that cost will be on you. I will charge whatever I spend at the post office and show you the receipts. If I had to guess the calipers will fit in 2 medium flat rates or one large but its very tight. That cost would be about $28 or $19. The rotors are heavy(more than 50lbs) and don't really fit in a flat rate box. I can squeeze them into a medium but not sure if post office will take it that way. If they do it will be about another $28. If not Fed Ex is probably about $70. Thanks for looking. Last edited by rlegendre62@gmail.com; 02-15-2016 at 11:24 AM. |
|
|
|
01-20-2016, 09:37 PM
|
#2 |
          
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,156
|
Wonder what the big difference between 10-15 Gen5 an the new 16 Gen6 an CZECH Republic interesting?!?!?!?!
|
|
|
|
|
01-23-2016, 02:12 PM
|
#3 |
 
Drives: 2013 2SS/RS Convertible Join Date: Jun 2015
Location: Ohio
Posts: 168
|
Any idea if these would fit a 2013?
|
|
|
|
|
01-23-2016, 03:18 PM
|
#4 |
Drives: 2010 Camaro 2SS RS Join Date: Nov 2011
Location: NYC
Posts: 2,387
|
Nice looks like they added steel thread inserts on the new calipers... Helps prevent stripping that plagues brembos
__________________
 |
|
|
|
|
01-25-2016, 03:11 PM
|
#5 |
|
|
would they fit a 2014 ss ?
|
|
|
|
|
01-25-2016, 06:17 PM
|
#6 |
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
Only fits 6th gen. Brembo has a large casting facility in czech republic. Most of their stuff is casted there for high volume OEMs.
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
|
|
|
|
|
01-27-2016, 03:49 PM
|
#7 |
|
Drives: 2012 camaro Join Date: Nov 2015
Location: flower mound Tx.
Posts: 65
|
Bump....new price $375
|
|
|
|
|
01-31-2016, 01:20 AM
|
#8 |
|
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
You should be posting on camaro6.com not on 5th gen, these dont fit on our cars.
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
|
|
|
|
|
02-07-2016, 10:25 AM
|
#9 |
|
Drives: 2012 camaro Join Date: Nov 2015
Location: flower mound Tx.
Posts: 65
|
sold
|
|
|
|
|
|
|
|
 |
|
|
