What Did You Do To Your Camaro Today? - Page 1109 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Mr. Stacy · 02-16-2016, 05:36 PM

Quote:

Originally Posted by Stroke9

No special tools. It's not bad at all. Just take your time and of course like anything else once you get 1 side done the other is half the time. A couple 18mm and a 24mm wrenches along with an impact and some 15mm on up sockets made the job really easy. ��
This video is a good reference: https://m.youtube.com/watch?v=51R8-6KN1A8

OK, that doesn't look too bad. What spring set did you use?

Oh, NM I see it in your sig. Thanks!

Caseyls3 · 02-16-2016, 05:39 PM

Same video I used on the spring install - not bad at all. As for me - tires mounted:

Sent from my iPhone using Tapatalk

derek1387 · 02-16-2016, 06:13 PM

Installed my ZL1 steering wheel, shift boot, and shift knob.

Quick and painless...but forgot to plug in one of the wires...Airbag light came on, so i freaked out. Drove it to the dealership.

$90 for them to tell me i left a plug undone.

/rookie mistake.

justjoshin · 02-16-2016, 08:46 PM

Yeah that video helped me out too. Car looks good Stroke9.

Mr. Stacy · 02-16-2016, 10:12 PM

Quote:

Originally Posted by Caseyls3

Same video I used on the spring install - not bad at all. As for me - tires mounted:

Sent from my iPhone using Tapatalk

Can't wait to see that combo on the car. That's gonna be sweet!

Hold it, that the same wheels as Stroke9?

Caseyls3 · 02-17-2016, 06:12 AM

Yup appear to be the same - only thing that is hard to tell is if he went 10s in front and 11s in back like I did with staggered tires as well. It looks like he did.

derek1387 · 02-17-2016, 06:16 AM

Changed out my factory LS wheel, shift knob, and boot for ZL1 stuff.

So much nicer!

Ashen 6.2 · 02-17-2016, 06:23 AM

New tires & wheels arrived and I put them on last night.

fhrex · 02-17-2016, 06:42 AM

LED trunk, dome, and license plate lighting installed! I felt the white light of the LEDs fit with the name I gave my car. Next are the DRL LEDs...

Welker2 · 02-17-2016, 03:33 PM

Decided to redo my front & rear 'SS' emblems. A while back I applied CF vinyl overlays; although I liked the look, they didn't completely cover the red OEM inserts, the front was the worst, and it bothered me from day one. So today I had enough and decided to remove the overlays and plasti dip them. For my first plasti dip adventure, I think they turned out pretty well. I've also ordered new CF overlays (from another source with better reviews), should be here in a few days.

Gonzo SS · 02-17-2016, 09:27 PM

Picked it up from the muffler shop. Resonator delete and Flowmaster Super 10s. Sounds awesome!

Sent from my LG-H811 using Tapatalk

HyperV117 · 02-18-2016, 11:06 AM

Finally got a pic of my all LED Front End.

AP90 · 02-18-2016, 12:38 PM

I haven't picked her back up yet, but she's in the shop getting a muffler delete. Im pretty excited about it. I don't want a ridiculously loud car, so for 80 bucks to make it "what it should be like from the factory" ill take it.

chasmanian · 02-18-2016, 01:10 PM

Quote:

Originally Posted by derek1387

Changed out my factory LS wheel, shift knob, and boot for ZL1 stuff.

So much nicer!

Derek, what radio is that?

Sent from my Nexus 7 using Tapatalk

02-16-2016, 05:39 PM	#15514
Caseyls3 Drives: 2011 Camaro SS/RS Convertible Join Date: Jun 2015 Location: Columbus Posts: 444	Same video I used on the spring install - not bad at all. As for me - tires mounted: Sent from my iPhone using Tapatalk __________________ 2011 Camaro SS/RS Vert - Jewel Red Tintcoat, 6M, 231/247 Comp Cam, Kooks headers, Borla ATAK, ATI under drive pulley, Richmond 4.10s, LS9 clutch, Hurst shifter, BMR Springs

02-16-2016, 06:13 PM	#15515
derek1387 Drives: 2015 1LS Red V6 Join Date: Aug 2015 Location: St Joseph, MO Posts: 1,849	Installed my ZL1 steering wheel, shift boot, and shift knob. Quick and painless...but forgot to plug in one of the wires...Airbag light came on, so i freaked out. Drove it to the dealership. $90 for them to tell me i left a plug undone. /rookie mistake. __________________ Sponsors: Overkill Motorsport BCS Auto JacFab Machining APDEG Dream Gear Mobile Audio Thanks to Will @ Overkill Motorsports, Jason @ JacFab, Jim @ Ohio Speed, Brandon at Dream Gear, and the boys at Randy Curnow Chevrolet 5th Gen V6 Performance Facebook Group

02-16-2016, 08:46 PM	#15516
justjoshin Drives: 2010 SW 1SS L99 Camaro Join Date: Aug 2011 Location: Louisiana Posts: 2,085 View My Garage	Yeah that video helped me out too. Car looks good Stroke9. __________________

02-17-2016, 06:12 AM	#15518
Caseyls3 Drives: 2011 Camaro SS/RS Convertible Join Date: Jun 2015 Location: Columbus Posts: 444	Yup appear to be the same - only thing that is hard to tell is if he went 10s in front and 11s in back like I did with staggered tires as well. It looks like he did. __________________ 2011 Camaro SS/RS Vert - Jewel Red Tintcoat, 6M, 231/247 Comp Cam, Kooks headers, Borla ATAK, ATI under drive pulley, Richmond 4.10s, LS9 clutch, Hurst shifter, BMR Springs

02-17-2016, 06:16 AM	#15519
derek1387 Drives: 2015 1LS Red V6 Join Date: Aug 2015 Location: St Joseph, MO Posts: 1,849	Changed out my factory LS wheel, shift knob, and boot for ZL1 stuff. So much nicer! Attached Images __________________ Sponsors: Overkill Motorsport BCS Auto JacFab Machining APDEG Dream Gear Mobile Audio Thanks to Will @ Overkill Motorsports, Jason @ JacFab, Jim @ Ohio Speed, Brandon at Dream Gear, and the boys at Randy Curnow Chevrolet 5th Gen V6 Performance Facebook Group

02-17-2016, 06:23 AM	#15520
Ashen 6.2 Drives: 2014 Camaro Z/SS Join Date: May 2014 Location: NW Arkansas Posts: 2,173 View My Garage	New tires & wheels arrived and I put them on last night. Attached Images __________________ 2014 Camaro SS L99, Ashen Grey w/Black Leather - Build thread - http://www.camaro5.com/forums/showthread.php?t=491561 Tuned by Ben @BWTuned, GPI 416 w/GPI S/C Cam, GPI Ported Heads, Holley Dominator ECU, Mag Heartbeat, ZL1 Fuel Pump/DSX Aux Pump, NW 103 TB, FIC 1650's, Alky Meth, Rossler T400 w/t-brake, Circle D Converter, Kooks Headers, Viking Coil Overs & all the BMR Goodies in the rear, Zl1 3.73 Diff, DSS Axles, Wiles Racing Driveshaft, Hendrix Offset Diff Bushings, AFE Solid Subframe Bushings, 875HP/843TQ 5FDP

02-17-2016, 06:42 AM	#15521
fhrex Drives: 2011 Camaro 2LT/RS Join Date: May 2015 Location: Farmville, Virginia Posts: 1,030 View My Garage	LED trunk, dome, and license plate lighting installed! I felt the white light of the LEDs fit with the name I gave my car. Next are the DRL LEDs...

02-17-2016, 03:33 PM	#15522
Welker2 Ret AF, cancer survivor Drives: 2013 Camaro 2SS/RS & 2006 Corvette Join Date: Jul 2015 Location: Mesquite, NV Posts: 2,741 View My Garage	Decided to redo my front & rear 'SS' emblems. A while back I applied CF vinyl overlays; although I liked the look, they didn't completely cover the red OEM inserts, the front was the worst, and it bothered me from day one. So today I had enough and decided to remove the overlays and plasti dip them. For my first plasti dip adventure, I think they turned out pretty well. I've also ordered new CF overlays (from another source with better reviews), should be here in a few days. Attached Images __________________

02-17-2016, 09:27 PM	#15523
Gonzo SS Drives: 2012 IBM 2SS/RS LS3/M6 Join Date: Apr 2015 Location: Atlanta, GA Posts: 354	Picked it up from the muffler shop. Resonator delete and Flowmaster Super 10s. Sounds awesome! Sent from my LG-H811 using Tapatalk __________________ Stainless Power LT Headers, K&N Typhoon CAI, VMAX Ported Throttle Body, Jannetty Tune, Phastek Scoop & Washer Bottle Relocator, VTC Resonator Delete w/Flowmaster Super 10's, BMR Lowering Springs, Koni Orange Struts, Factory Hurst Short Throw Shifter, Skip Shift Eliminator, DRL & Halo Harness, Window Valet Scosche Kit w/Pioneer AVH-4100NEX, Lloyds Custom Mats, Blue LED Footwell Lighting

02-18-2016, 11:06 AM	#15524
HyperV117 Drives: 2010 Camaro 1SS Join Date: Nov 2015 Location: CA Posts: 360	LED Headlights, Fogs, and Turn Signals Finally got a pic of my all LED Front End. __________________

02-18-2016, 12:38 PM	#15525
AP90 Drives: 2010 camaro 2ss Join Date: Feb 2016 Location: Midwest Posts: 36	I haven't picked her back up yet, but she's in the shop getting a muffler delete. Im pretty excited about it. I don't want a ridiculously loud car, so for 80 bucks to make it "what it should be like from the factory" ill take it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 01:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM