Should I avoid buying a used 2010 - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

anotherreject · 08-23-2015, 07:31 PM

Thanks, feeling better about saving a few bux and adding 2010's to my shopping list

ZiG · 08-23-2015, 08:10 PM

The suspension can be converted to FE4 with some rear arms and swaybars. Really easy. The front strut towers on '10/early '11 did not have the mount for the oem STB but there are plenty of AM solutions. Since you want leather you're looking at a 2ss and the early '10s didn't have park assist and none of them had the HUD, both of which you would see on a '11 2ss. '10s also had some brake squeal which was addressed later with added weights to the calipers.

krisprz2010camaross · 08-23-2015, 09:01 PM

You can always add the HUD like I am going to do in the future. I have the parts and the accessories guy at my Chevy dealership said he can install it, but I want some more power first

lol

IMPERIALBLUE2SS · 08-24-2015, 09:25 PM

My 10 is a late build, I have the parking sensors and the upgraded pads. Bought it with 2k on the odometer. Have 15k on it now rock solid. No leaks,or problems.

KJZ28 · 08-24-2015, 09:36 PM

I JUST bought my 2010 2SS/RS two weeks ago. 28,450 miles, Flowmaster, K&N CAI, window tint, from a BMW dealer for $23,480, 60 day warranty. I am so happy with it its ridiculous.

KJZ28 · 08-24-2015, 09:37 PM

Quote:

Originally Posted by KJZ28

I JUST bought my 2010 2SS/RS two weeks ago. 28,450 miles, Flowmaster, K&N CAI, window tint, from a BMW dealer for $23,480, 60 day warranty. I am so happy with it its ridiculous.

I dont have brake squeal, I dont see any weights. No HUD stinks, but didn't bother me until I realized the newer ones had it.

BluePhoenix · 09-01-2015, 05:28 AM

If you get a good price on a 2010 and you don't need techy stuff from the start then that's what you should get. I haven't seen any real issues out of 2010 models other than bad brake squeal, cracked dash board above passenger airbag which is a common problem in 2010, and if you remove the rear spoiler expect to find chips in the paint where the spoiler was. Just remember 2010's are 5-6 years old now, i'd check both Autocheck and Carfax reports and take it for a good test drive before you buy it so it gives an opportunity for anything bad to show up during the test drive.

TommyTheCat · 09-01-2015, 04:51 PM

Quote:

Originally Posted by Hetfield03

I bought my 2010 used from Becky at Rodgers, I also bought a new 2011 from her. My 2010 started slightly leaking oil but it was covered under the warranty. No questions asked. Some cover was leaking, I can't remember the name. Oh, maybe timing chain cover?
Anyhow, you could probably find a 2010 2Lt Rs for under $20,000 now. I got mine right at that with 33,000 miles on it.

Soooo if you don't want the leather and rs, I'm sure this is doable. I might even go for a 2011 for $20,000. But I was impatient. Oh and a manual too.

He wants an SS. Which I've seen around here for less than 20k
Just checked now and there's an SS 2010 automatic for 22k even, with long tube headers, k&n filter, throttle spacer, rohana 22" wheels, kenwood touch screen radio, and an SLP programmer.

If you're getting used definitely don't settle for a V6.

Only issue I know of for the 2010s is the dash board cracking, which you can cover with a dash mat. Also heard lots of heater core problems, I think there is either a recall or TSB for it.

MarioSS · 02-13-2016, 02:01 PM

sorry for bumping such an old thread guys. But i would like to ask if anyone knows a decent vin decoding (equipment) website?
I tried using all the ones that shows on google but none shows the actual options, and most of them shows wrong specs :S

blakjak55 · 02-13-2016, 09:25 PM

Quote:

Originally Posted by MarioSS

sorry for bumping such an old thread guys. But i would like to ask if anyone knows a decent vin decoding (equipment) website?
I tried using all the ones that shows on google but none shows the actual options, and most of them shows wrong specs :S

PM matthew9440 and he can get one for you. May be some others that work at a dealer that can get one as well. Search for build sheet on here.

08-23-2015, 08:10 PM	#16
ZiG Drives: 2011 2SS/RS LS3 Join Date: Jan 2015 Location: Alberta Posts: 173	The suspension can be converted to FE4 with some rear arms and swaybars. Really easy. The front strut towers on '10/early '11 did not have the mount for the oem STB but there are plenty of AM solutions. Since you want leather you're looking at a 2ss and the early '10s didn't have park assist and none of them had the HUD, both of which you would see on a '11 2ss. '10s also had some brake squeal which was addressed later with added weights to the calipers. __________________ 2011 2SS/RS LS3 Rotofab CAI/scoop/washer - FE4 conversion - Pfadt ZL swaybars - BMR endlinks - Hurst short shifter - RKSport spoiler

08-23-2015, 09:01 PM	#17
krisprz2010camaross Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014 Location: Yorba Linda, California Posts: 1,561	You can always add the HUD like I am going to do in the future. I have the parts and the accessories guy at my Chevy dealership said he can install it, but I want some more power first lol __________________ YouTube:Krisprz garage Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez

09-01-2015, 05:28 AM	#21
BluePhoenix Drives: 23 Camaro 2SS 1LE Join Date: Jul 2013 Location: Hanover, PA Posts: 3,374	If you get a good price on a 2010 and you don't need techy stuff from the start then that's what you should get. I haven't seen any real issues out of 2010 models other than bad brake squeal, cracked dash board above passenger airbag which is a common problem in 2010, and if you remove the rear spoiler expect to find chips in the paint where the spoiler was. Just remember 2010's are 5-6 years old now, i'd check both Autocheck and Carfax reports and take it for a good test drive before you buy it so it gives an opportunity for anything bad to show up during the test drive. __________________ 2023 Camaro 2SS 1LE, A10, Summit White, 1100 - 3/23/2023 2000 - 3/27/2023 3000 - 3/28/2023 3000 - 4/04/2023 — 4/24 TPW 3400 - 4/12/2023 — 4/24 TPW 3800 - 4/28/2023 - Delayed ETA VIN: 1G1FH1R73P0145237 5/10/2023 - ETA 5/27/2023 5000 - 5/30/2023 6000 - 6/3/2023 2024 GMC Sierra 1500

08-23-2015, 07:31 PM	#15
anotherreject Drives: no camaro Join Date: May 2014 Location: PA Posts: 61	Thanks, feeling better about saving a few bux and adding 2010's to my shopping list

08-24-2015, 09:25 PM	#18
IMPERIALBLUE2SS Drives: 2010 imperial blue LS3 M6 2SSRS Join Date: Aug 2013 Location: Virginia beach Virginia Posts: 210	My 10 is a late build, I have the parking sensors and the upgraded pads. Bought it with 2k on the odometer. Have 15k on it now rock solid. No leaks,or problems.

08-24-2015, 09:36 PM	#19
KJZ28 Drives: 2018 Buick Regal TourX Join Date: Aug 2015 Location: North of NYC Posts: 546 View My Garage	I JUST bought my 2010 2SS/RS two weeks ago. 28,450 miles, Flowmaster, K&N CAI, window tint, from a BMW dealer for $23,480, 60 day warranty. I am so happy with it its ridiculous.

02-13-2016, 02:01 PM	#23
MarioSS Drives: 2010 Camaro SS (RS LS3) Join Date: Dec 2015 Location: Jo Posts: 302	sorry for bumping such an old thread guys. But i would like to ask if anyone knows a decent vin decoding (equipment) website? I tried using all the ones that shows on google but none shows the actual options, and most of them shows wrong specs :S