03-08-2016, 06:57 PM | #1 |
Drives: 2013 Black ZL1 Join Date: Nov 2015
Location: Ky
Posts: 84
|
Can someone post a pic of there Clear Bra on there Z
I would like to see what a clear bra looks like on a Z.... right now i have a bra to keep the rock chips from doing damage, but I might want to get a clear one soon...
__________________
|
03-08-2016, 07:13 PM | #2 |
Drives: 2014 Red Hot ZL1 Join Date: Jan 2010
Location: Arizona
Posts: 147
|
The protective film is transparent. You can only see the "clear" protective film (edges) at certain angles. Otherwise it looks just like a car without the clear protective film. Much like the lower picture in your post. It looks just like that.
__________________
2014 Red Hot Camaro ZL1
2002 Victory Red Trans Am WS6 2000 Lt Pewter Metallic Silverado Z71 1996 Metallic Gray Ford Taurus GL |
03-08-2016, 07:18 PM | #3 |
2018 Garnet Red ZL1 conve
Drives: 2013 & 2018 ZL1 vert Join Date: May 2009
Location: Des Moines, IA
Posts: 1,471
|
Get rid of that ugly black bra! Get the XPel clear bra installed on all the danger areas, you won't be disappointed if installed by a professional and you would be hard pressed to even see it at all if installed correctly! Good luck.
__________________
Build Thread: 2018 ZL1 Vert Purchased (Overpar73)
|
03-08-2016, 07:26 PM | #4 |
Drives: 2015 Black ZL1 m6, gone 2012 CTS-V Join Date: May 2014
Location: Metro Detroit
Posts: 225
|
Here are a few of mine. Front bumper and side gills.
|
03-08-2016, 07:43 PM | #5 |
Go fast, please.
|
If done right you basically can't even tell it's there.
|
03-08-2016, 07:52 PM | #6 |
Allergic to stupid.
Drives: 2015 ZL1 #957 M6 AGM & 1990 Z24 Join Date: Aug 2010
Location: Jacksonville, FL
Posts: 368
|
The only reason I notice the edges is because I have the same areas covered on mine and I know where the edges are. Nobody else has ever noticed it without me pointing it out.
OP- Don't hesitate getting XPel Ultimate installed. The stuff isn't cheap, but we're rolling in $60K cars. What's another $1000 or so to protect them?
__________________
|
03-08-2016, 07:54 PM | #7 |
Drives: 2013 Black ZL1 Join Date: Nov 2015
Location: Ky
Posts: 84
|
That looks good....what brand is that?
__________________
|
03-08-2016, 09:33 PM | #8 |
Doing what I like to do
Drives: 1963 Landrover Join Date: Nov 2013
Location: Almost at the corner !
Posts: 667
|
|
03-09-2016, 05:04 AM | #9 |
Drives: 2015 Black ZL1 m6, gone 2012 CTS-V Join Date: May 2014
Location: Metro Detroit
Posts: 225
|
|
03-09-2016, 07:34 AM | #10 |
Drives: ZL1 Convertible Auto Join Date: Apr 2015
Location: Macomb, Michigan
Posts: 330
|
|
03-09-2016, 07:50 AM | #11 |
Drives: 2014 ZL1 6M Join Date: Aug 2015
Location: 813
Posts: 118
|
Best move I ever made was putting a clear bra on all my cars...had it on my 14 LS3 and now the same one on my 14 ZL1...will try to get a closer pic soon.
__________________
2014 ZL1, 6M, Summit White/Black, Carbon Fiber hood insert
2014 2SS/RS LS3 "sold" ZL1 Exclusive Member |
03-09-2016, 08:45 AM | #12 |
Drives: 2015 Black ZL1 m6, gone 2012 CTS-V Join Date: May 2014
Location: Metro Detroit
Posts: 225
|
http://norockchips.com/ They are the best! You will talk to Larry (the owner) and he really knows what he is doing. If you look at their gallery you we will see some amazing cars. Anyone that is good enough for people to let them touch their Ferarri, Bentley, Aston Martin, Lambo or McLaren is good enough for me. You won't be disappointed. |
03-09-2016, 11:06 AM | #13 | |
Drives: ZL1 Join Date: Dec 2015
Location: Boise
Posts: 11
|
Quote:
I just bought a red 2015 ZL1 for my wife for Christmas and one of the first things I wanted to do was the clear bra. I ran into a problem when I pulled the front license plat holder off. The dealer (Dallas, TX) had taken like three tries to hang the bracket. It looked like swiss cheese. Anyhow, I have since gotten the bumper repaired and painted, but I am letting it cure before I do the clear, as the off gasses can make it lift. Transguard on Cole in Boise does the install. When I stopped in to take a look at the operation they had a brand new Corvette and a brand new Viper being done. The coating looks great when installed. It does have a little bit of a wave or orange peel look, but I am really critical of that look. Honestly it is smoother that most of the factory paint I have seen. In short get it done, unless you point out where it is no one will know the difference. Side note-The car is at JDP Motorsports in Sandy, UT right now getting some mods done. We will be picking it up tomorrow and heading for a track day at Miller. I am driving Friday and my wife is driving Saturday. (she still thinks it's her car ) I road raced motorcycles at Miller up until a couple years ago, so I am really looking forward to getting on track with a car! East track this weekend, one of my favorites on a bike! |
|
03-09-2016, 01:41 PM | #14 |
Drives: 2013 ZL1 Join Date: Jan 2015
Location: Orlando
Posts: 936
|
It will be invisible unless you just look at the body seems.
__________________
2013 A6 ZL1
|
|
|
|
|