03-18-2016, 04:38 PM | #1 |
Drives: 14 SS/ 1LE Join Date: Jun 2013
Location: parts unknown
Posts: 928
|
coilover install question
I am in the process of installing Z28 coilovers on my 1LE. I just got done with the fronts, following the Pfadt directions. I have a question though. There is a gap between the top retaining washer and the body as shown in the picture below. Is this a problem? I dont think it was there before the install. Do I have the washers on upside down?
|
03-19-2016, 12:42 PM | #2 |
Drives: 14 SS/ 1LE Join Date: Jun 2013
Location: parts unknown
Posts: 928
|
Anyone?
|
03-19-2016, 12:45 PM | #3 |
Drives: 2013 Camaro 2SS/RS M6 Join Date: Feb 2013
Location: So Cal
Posts: 1,048
|
I remember a post about this awhile ago, from what I read its normal.
http://www.camaro5.com/forums/showthread.php?t=157819 Here is the gap on mine, I do not have coil overs just lowering springs and I have it too.
__________________
2013 Black / Black Camaro 2SS/RS M6 w/Magnuson TVS2300, ZL1 Fuelpump / ADM FPCM, NPP Exhaust, Cold Air Inductions CAI w/ Scoop, Elite Engineering Catch Can, VMAX Ported TB, OEM 1LE Front Splitter, AAC Ghosted Side Markers, Dropped on BMR Split Drop Springs Build#24869 |
03-19-2016, 01:11 PM | #4 |
Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,319
|
Yep, normal. When you jack the front of the car up, and the front suspension goes into droop, the gap goes away. When it is at ride height you have the gap. Simple way GM engineered retaining the top of the strut to the body structure, while minimizing noise/vibration/harshness.
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
Last edited by cdb95z28; 03-19-2016 at 01:12 PM. Reason: more info |
03-19-2016, 01:13 PM | #5 |
Banned
Drives: Camaro Join Date: Mar 2013
Location: USA
Posts: 2,701
|
Normal
|
03-19-2016, 01:37 PM | #6 |
Drives: 2010 2ss red LS3 Join Date: Aug 2011
Location: perkasie pa
Posts: 533
|
Normal, coilover floats in the strut tower.
__________________
Pedders Pace Car Kit with ZL1 sway bar conversion & camber bolt kit.Lowered 1.5". 1LE tires & wheels. CAI air intake. Anvil CF rear spoiler.MGW shifter. 1 7/8" Kooks LT headers & HF cats.V-Max ported TB. Tuned.
|
03-19-2016, 01:41 PM | #7 |
Drives: 14 SS/ 1LE Join Date: Jun 2013
Location: parts unknown
Posts: 928
|
Got it, thanks guys. I didnt remember it from before the install so I wanted to double check it is ok. Now its time to get aligned
|
|
|
|
|