Roto-fab LS3 engine covers! - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

paul2010 · 09-04-2009, 06:28 PM

That goes on your overflow for the radiator right next to your air box.

Roto-fab 1 · 09-05-2009, 09:17 AM

Quote:

Originally Posted by BlackinBlack

That is absolutely SICK looking.

I just got my Roto-Fab CAI yesterday. Very easy to install and very nice. BTW I called before I ordered and the customer service was to notch.

For the Roto-Fab guys I do have one question. In the kit came a piece of split tubing. (Not the split loom for the wiring but a short 2 inch piece of tubing with a split down one side.) The instructions make no mention of it. What is it for? I hate having left over parts.

Paul is right-it goes on the line that's right against your air box. It's actually an A/C line though. Slide it over the line right behind the service port so it rests against the air box instead of the line itself contacting the air box. We added this to the kit, then changed the instructions; however, a batch of instructions was printed from the old master copy without revision. Sorry to leave you up in the air on that one.
Mike

kstormoen · 09-06-2009, 10:40 PM

Can you posta picture of this tube. I'm not sure I got it, I don't remember installing anything like that.

Thanks

Roto-fab 1 · 09-07-2009, 11:02 AM

Quote:

Originally Posted by kstormoen

Can you posta picture of this tube. I'm not sure I got it, I don't remember installing anything like that.

Thanks

It's a small piece of standard 1/2" ID rubber hose slit so it slides over the A/C line just behind the service port. The purpose is to keep the air box and line from rubbing against each other. It is a new addition that wasn't in the early kits. It appears most cars have a little daylight between our air box and the line-we just decided to add it for a little "insurance".

kstormoen · 09-07-2009, 07:19 PM

Thanks Mike. Would you recommend installing it or not? I'm sure I have some hose somewhere in the garage.

BlackinBlack · 09-07-2009, 07:32 PM

Quote:

Originally Posted by Roto-fab 1

It's a small piece of standard 1/2" ID rubber hose slit so it slides over the A/C line just behind the service port. The purpose is to keep the air box and line from rubbing against each other. It is a new addition that wasn't in the early kits. It appears most cars have a little daylight between our air box and the line-we just decided to add it for a little "insurance".

My line was against the air box so this was a nice addition. I did install mine lower on the line as it touched there instead of up near the service port. In addition it hid the piece of tubing.

BTW for those considering this kit. It is very nice and get lots of nice cool air. After a spirited ride I came back and you could feel the temperature difference from inside the air box to outside of it. In addition I had a moth sucked onto my airfilter so it does get air from outside the engine compartment.

2010_5thgen · 09-07-2009, 08:02 PM

those looks awesome. i need some kind of engine cover like that after i put the s/c on.

kstormoen · 09-08-2009, 04:17 PM

Thanks Mike. Got everything today and installed. The airboxes are about the same color, can't really tell a difference. I will mail the old back to you asap.

Enjoy.

Before

Name: 2010 Camaro.jpg
Views: 1457
Size: 156.0 KB

Name: 2010 Camaro.jpg
Views: 1457
Size: 156.0 KB

Finished

Name: 2010 Camaro (12).jpg
Views: 1479
Size: 151.0 KB

ffrcobra_65 · 09-08-2009, 05:28 PM

The Roto-Fab covers sure look great! I need to stop looking in this section of the forum because every time I do, it costs me money!

Roto-fab 1 · 09-08-2009, 07:57 PM

Quote:

Originally Posted by kstormoen

Thanks Mike. Got everything today and installed. The airboxes are about the same color, can't really tell a difference. I will mail the old back to you asap.

Enjoy.

Before

Attachment 52854

Finished

Attachment 52853

Sweet! They look better on a black car than a yellow one!

I was surprised the powder coat silver came so close to matching the Silver Ice Metallic. The first good comparison I've had was against your painted air box. One good thing about the automotive finish is it gives you the same high gloss and smooth finish you have on the engine covers.

2010_5thgen · 09-08-2009, 08:10 PM

those probably wont fit too well with a magna charger would they?

ZZIXX · 09-08-2009, 08:58 PM

I recently inquired and they do sell a version for the magnacharged equipped.

2010_5thgen · 09-08-2009, 08:59 PM

very nice looking. what intake did you go with for the magna charger?

tones2SS · 09-08-2009, 09:35 PM

WOW!!! Roto-Fab , great products. LOVE the engine hats and plenum cover. AND, I usually hate engine hats on engines. VERY NICE!
Keep up the great customer service as well.

09-07-2009, 08:02 PM	#35
2010_5thgen Drives: 2012 Porsche Panamera 4 Join Date: Nov 2007 Location: Ohio Posts: 3,274 View My Garage	those looks awesome. i need some kind of engine cover like that after i put the s/c on. __________________ Brixton Forged CM10 Wheels IN STOCK!!! RF7 SOON!!!! Camaro/M3/M4 wheels in stock High Gloss Titanium

09-08-2009, 04:17 PM	#36
kstormoen Drives: Camaro SS2 L99 Join Date: Jul 2009 Location: Elk River, MN Posts: 78	Thanks Mike. Got everything today and installed. The airboxes are about the same color, can't really tell a difference. I will mail the old back to you asap. Enjoy. Before Finished

09-08-2009, 08:10 PM	#39
2010_5thgen Drives: 2012 Porsche Panamera 4 Join Date: Nov 2007 Location: Ohio Posts: 3,274 View My Garage	those probably wont fit too well with a magna charger would they? __________________ Brixton Forged CM10 Wheels IN STOCK!!! RF7 SOON!!!! Camaro/M3/M4 wheels in stock High Gloss Titanium

09-08-2009, 08:58 PM	#40
ZZIXX Blown SS Drives: 1969 Camaro RS, 2010 RS/SS Join Date: Oct 2008 Location: Ambler, PA Posts: 204 View My Garage	I recently inquired and they do sell a version for the magnacharged equipped. __________________ Jeff SIM 2SS/RS M6 TVS 2300, Comp Cam, ARH, 3" JBA Exhaust, ADM Race CAI, KB BAP, Hurst, BMR, Pfadt Suspension 610RWHP/602RWTQ My Build Thread

09-08-2009, 08:59 PM	#41
2010_5thgen Drives: 2012 Porsche Panamera 4 Join Date: Nov 2007 Location: Ohio Posts: 3,274 View My Garage	very nice looking. what intake did you go with for the magna charger? __________________ Brixton Forged CM10 Wheels IN STOCK!!! RF7 SOON!!!! Camaro/M3/M4 wheels in stock High Gloss Titanium

09-04-2009, 06:28 PM	#29
paul2010 Drives: 2012 ZL1 #1278 Join Date: Aug 2009 Location: Indiana Posts: 1,213 View My Garage	That goes on your overflow for the radiator right next to your air box.

09-06-2009, 10:40 PM	#31
kstormoen Drives: Camaro SS2 L99 Join Date: Jul 2009 Location: Elk River, MN Posts: 78	Can you posta picture of this tube. I'm not sure I got it, I don't remember installing anything like that. Thanks

09-07-2009, 07:19 PM	#33
kstormoen Drives: Camaro SS2 L99 Join Date: Jul 2009 Location: Elk River, MN Posts: 78	Thanks Mike. Would you recommend installing it or not? I'm sure I have some hose somewhere in the garage.

09-08-2009, 05:28 PM	#37
ffrcobra_65 Account Suspended Drives: SuperCharged 2SS/RS IOM MN6 Join Date: May 2009 Location: CA Posts: 5,094	The Roto-Fab covers sure look great! I need to stop looking in this section of the forum because every time I do, it costs me money!

09-08-2009, 09:35 PM	#42
tones2SS Drives: '13 Roush S3 '16 Ram Sport 4X4 Join Date: Apr 2009 Location: Massachusetts Posts: 3,096	WOW!!! Roto-Fab , great products. LOVE the engine hats and plenum cover. AND, I usually hate engine hats on engines. VERY NICE! Keep up the great customer service as well.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hot air Intakes -By Kenne bell	ADM PERFORMANCE	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	66	02-08-2011 09:33 PM
Trade my Engine Cover for fuel rail covers?	Black5thgen	Cosmetics and Lighting Modification Discussions	7	07-26-2009 09:26 PM
Check your Order here	bvonscott	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	665	06-29-2009 02:00 PM
Camaro ls3 news...true or false?	Dark Knight	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	74	06-05-2008 06:29 PM
Axial Vector Engine	Mr. Wyndham	General Automotive + Other Cars Discussion	6	06-20-2007 05:00 PM